MVAP, MVAL, and MVAV Series ¾ Industry Standard Package ¾ Wide Frequency Range ¾ RoHS Compliant Available ¾ Less than 1 pSec Jitter ELECTRICAL SPECIFICATIONS: LVDS Frequency Range Frequency Stability* Operating Temp.Range Storage Temp. Range Aging Logic “0” Logic “1” +2.5VDC ± 5% +3.3VDC ± 5% +5.0VDC ± 5% Symmetry (50% of waveform) Rise / Fall Time (20% to 80%) Load Start Time Phase Jitter (12kHz to 20MHz) Supply Voltage (Vdd) Supply Current Tri-State Operation LVPECL PECL 70.000MHz to 800.000MHZ (See Part Number Guide for Options) (See Part Number Guide for Options) -55°C to +125°C ±5 ppm / yr max 1.43V typ Vdd – 1.620 VDC max Vdd – 1.620 VDC max 1.10V typ Vdd- 1.025 vdc min Vdd- 1.025 vdc min 50 mA max 50 mA max N/A 60 mA max 60 mA max N/A N/A N/A 140 mA max (See Part Number Guide for Options) 2nSec max 50 Ohms into Vdd-2.00 VDC 10mSec max Less than 1 pSec Vih = 70% of Vdd min to Enable Output Vil = 30% max or grounded to Disable Output (High Impedance) * Inclusive of Temp., Load, Voltage and Aging Control Voltage (Vc) +2.5VDC +3.3VDC +5.0VDC 1.25VDC ±1.00VDC 1.65VDC ±1.50VDC N/A 1.25VDC ±1.00VDC N/A 1.65VDC ±1.50VDC N/A N/A 2.50VDC ±2.00VDC (See Part Number Guide for Options) Pullability PART NUMBER GUIDE: Frequency MVA 14 Pin Dip VCXO Output P = PECL L = LVPECL V = LVDS Package Options 5A = 14Pin Dip w/5 pins 6A = 14Pin Dip w/6 pins Symmetry Blank = 40%/60% A = 45%/55% Supply Voltage 2 = +2.5 VDC 3 = +3.3 VDC 5 = +5.0 VDC RoHS Compliant Blank = Not Compliant F = is Compliant Frequency Stability 020 = ±20 ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Pullability A = ±200 ppm min C = ±100 ppm min D = ±50 ppm min P = ±25 ppm min Linearity Blank = ±20% max X = ±5% max Y = ±10% max Z = ±15% max MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Specifications subject to change without notice Revision MVAP032907C MECHANICAL DIMENSIONS: 5A OPTION 20.70 [.815] MAX 8.50 [.335] MAX 15.24 [.600] 5.08 [.200] 2.54 [.100] 9 8 13.10 [.516] MAX 14 7.62 [.300] 1 7 .46 [.018] 5A PACKAGE OPTION PIN 1 VOLTAGE CONTROL PIN 7 CASE GROUND PIN 8 OUTPUT COMPL. OUTPUT PIN 9 PIN 14 SUPPLY VOLTAGE Black Dot to Denote Pin 1 DIMENSIONS IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED MECHANICAL DIMENSIONS: 6A OPTION 20.70 [.815] MAX 8.50 [.335] MAX 15.24 [.600] 5.08 [.200] 8 13.10 [.516] MAX 12 14 7.62 [.300] 7 3 1 .46 [.018] 6A PACKAGE OPTION PIN 1 CONTROL VOLTAGE ENABLE/DISABLE PIN 3 OUTPUT PIN 7 PIN 8 OUTPUT COMPL. OUTPUT PIN 12 PIN 14 SUPPLY VOLTAGE 5.08 [.200] Black Dot to Denote Pin 1 ENABLE/DISABLE OPTION DIMENSIONS IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED LOGIC 1 = OSCILLATOR LOGIC 0 OR GND = NO OSCILLATOR ENVIRONMENT / MECHANICAL: Shock Solderability Solvent Resistance Vibration Gross Leak Test Fine Leak Test TAPE and DIMENSIONS: MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 215 MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A-2 PHASE NOISE: Line 1 =MXXXXX M = MMD COMPONENTS XXXXX = Frequency in MHZ Line 2 = SYYMML S = Internal Code YYMM = 4 Digit Date Code (Year / Month) L = Denotes RoHS Compliant PHASE NOISE PLOT COMING SOON Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Specifications subject to change without notice Revision MVAP032907C