ZENER DIODE MZ1.0GD3V3 THRUMZ1.0GD100 FEATURES • • • • Silicon Planar Power Zener Diodes For use in stabilizing and clipping circuits with High power rating Standard Zener Voltage tolerance is ±5%, Add suffix “A” FOR ±10% tolerance Other Zener voltages and Tolerances are available upon request These diodes are also available in the MELF case with type Designation MZ1.0GM3V3 thru MZ1.0GM100 MECHANICAL DATA • • Case: DO-41 Glass Case Weight: approx.0.35g MAXIMUN RATINGS AND ELECTRICAL CHARACTERISTICS • Ratings at 25℃ ambient temperature unless otherwise specified Symbols Limits Unit Power Dissipation at Tamb=℃ Ptot 1.0(1) Watts Junction Temperature Tj 150 ℃ Storage Temperature Range Ts -50to+150 ℃ Zener Current (see Table “characteristics”) Characteristics at Tamb=25℃ Thermal Resistance Junction to Ambient Air Forward Voltage at IF=100mA Symbols Min Typ Max Unit RthJA - - 170(1) ℃/W VF - - 1.2 Volts Notes 1. Valid provided that electrodes at a distance of 10mm from case are kept at ambient temperature. E-mail: [email protected] Web Site: www.cnmic.com ZENER DIODE MZ1.0GD3V3 THRUMZ1.0GD100 ELECTRICAL CHARACTERISTIC Ratings at 25℃ ambient temperature unless otherwise specified Type MZ1.0GD3V-76 MZ1.0GD3V-69 MZ1.0GD3V-64 MZ1.0GD4V-58 MZ1.0GD4V-57 MZ1.0GD5V—49 MZ1.0GD5V-45 MZ1.0GD6V-41 MZ1.0GD6V-37 MZ1.0GD7V-34 MZ1.0GD8V-31 MZ1.0GD9V-28 MZ1.0GD10V-25 MZ1.0GD11V-23 MZ1.0GD12V-21 MZ1.0GD13V-19 MZ1.0GD15V-17 MZ1.0GD16V-15.5 MZ1.0GD18V-14 MZ1.0GD20V-12.5 MZ1.0GD22V-11.5 MZ1.0GD24V-106 MZ1.0GD27V-9.5 MZ1.0GD30V-8.5 MZ1.0GD33V-7.5 MZ1.0GD36V-7.0 MZ1.0GD39V-6.5 MZ1.0GD43V-6.0 MZ1.0GD47V-5.5 MZ1.0GD51V-5.0 MZ1.0GD56V-4.5 MZ1.0GD62V-4.0 MZ1.0GD68V-3.7 MZ1.0GD75V-3.3 MZ1.0GD82V-3.0 MZ1.0GD91V-2.8 MZ1.0GD100V-2.5 Device Marking Code 3V3-76 3V6-69 3V9-64 4V3-58 4V7-57 5V1-49 5V6-45 6V2-41 6V8-37 7V5-34 8V2-31 9V1-28 10V-25 11V-23 12V-21 13V-19 15V-17 16V-15.5 18V-14 20V-12.5 22V-11.5 10.624V279.5V30V8.533V-7.5 36V-7.0 39V-6.5 43V-6.0 47V-5.5 51V-5.0 56V-4.45 62V-4.0 68V-3.7 75V-3.3 82V-3.0 91V-2.8 100V-2.5 Zener Valtage(3) at IZT Vz(v) (△ Vz＜＝5%)(4) MIN MAX 3.14 3.42 3.7 4.08 4.46 4.84 5.32 5.89 6.46 7.13 7.79 8.65 9.5 10.45 11.4 12.35 14.25 15.2 17.1 19 20.9 22.8 25.65 28.5 31.35 34.4 37.05 40.85 44.65 48.46 53.2 58.9 64.6 71.25 77.9 86.45 95 3.47 3.78 4.1 4.52 4.94 5.36 5.88 6.51 7.14 7.88 8.61 9.56 10.5 11.5 12.6 13.65 15.75 16.8 18.9 21 23.1 25.2 28.35 31.5 34.65 37.6 40.95 45.15 49.35 53.55 58.8 65.1 71.4 78.75 86.1 85.55 105 Test Current IZT (mA) 76.0 69.0 64.0 58.0 53.0 49.0 45.0 41.0 37.0 34.0 31.0 28.0 25.0 23.0 21.0 19.0 17.0 15.5 14.0 12.5 11.5 10.5 9.5 8.5 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.7 3.3 3.0 2.8 2.5 Maximum Zener Impedance(1) ZZT At IZT (Ω) 10 10 9 9 8 7 5 2 3.5 4 4.5 5 7 8 9 10 14 16 20 22 23 25 35 40 45 50 60 70 80 95 110 125 150 175 200 250 350 ZZK (Ω) 400 400 400 400 500 550 600 700 700 700 700 700 700 700 700 700 700 700 750 750 750 750 750 1000 1000 1000 1000 1500 1500 1500 2000 2000 2000 2000 3000 3000 3000 at IZK Maximum Reverse Leakage Current at VR IR (mA) (μA) (V) 1 1 1 1 1 1 1 1 1 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 100 100 50 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 1 1 1 1 1 1 2 3 4 5 6 7 7.6 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.6 47.1 51.7 56 62.2 69.2 76 Surge Current at TA=25℃ IR(mA) Maximum Regulator Current(2) IZM(mA) 1380 1260 1190 1070 970 890 810 730 660 605 550 500 454 414 380 344 304 285 250 225 205 190 170 150 135 125 115 110 95 90 80 70 65 60 55 50 45 276 252 234 217 193 178 162 146 133 121 110 100 91 83 76 69 61 57 50 45 41 38 34 30 27 25 23 22 19 18 16 14 13 12 11 10 9 Notes: (1). The Zener impedance is derived from the 1KHz AC voltage which results when an AC current having an RMS value equal to 10% of the Zener current (IZT or IZK) is superimposed on IZT or IZK . Zener impedances is measured at two point to insure a sharp knee on the breakdown (2). Valid provided that electrodes are kept at ambient temperature. (3). Measured under thermal equilibrium and DC test fonditions. (4). Standard Zener Voltage tolerance is ±5%. Add suffix “A” for ±10% tolerance. E-mail: [email protected] Web Site: www.cnmic.com ZENER DIODE MZ1.0GD3V3 THRUMZ1.0GD100 RATING AND CHARACTERISTIC CURVES MZ1.0GD3V3 THRU MZ1.0GD100 FIG.1-ADMISSIBLE POWER DISSIPATION VERSUS AMBIENT TEMPERATURE W 1.0 FIG.2-BREAKDOWN CHARACTERISTICS Tj =constant (pulsed) Valid provided that leads are kept at ambient temperature or adistance of 10mm from case mA 240 3.9 4.7 Tj =25℃ 200 5.6 IZ 6.8 160 0.8 Test Current Iz 120 Ptot 8.2 100mA 10 12 80 5mA 0.6 40 0 0 1 2 4 3 5 6 7 8 9 10 11 12 13 14 15V VZ 0.4 0.2 0 100 0 200℃ Tamb FIG.4-BREAKDOWN CHARACTERISTICS FIG.3-BREAKDOWN CHARACTERISTICS Tj =constant (pulsed) Tj =constant (pulsed) mA 60 mA 20 ZMY... 18 15 ZMY... Tj =25℃ Tj =25℃ 56 22 50 27 IZ 68 40 IZ 5mA 30 Test Current Iz 10mA 33 Test Current Iz 82 100 10 39 47 5mA 20 10mA 10 0 0 0 5 10 15 20 25 30 35 40 45 50V 0 50 E-mail: [email protected] 100 150 VZ VZ Web Site: www.cnmic.com 200V