INTEGRATED CIRCUITS 74F365, 74F366*, 74F367, 74F368* Buffers/drivers * Discontinued part. Please see the Discontinued Product List. Product specification Supersedes data of 1990 Jan 08 IC15 Data Handbook 1999 Jan 08 Philips Semiconductors Product specification 74F365, 74F366* 74F367, 74F368* Buffers/drivers 74F365, 74F367 Hex Buffer/Driver (3-State) 74F366, 74F368 Hex Inverter Buffer/Driver (3-State) FEATURES • High-impedance NPN base inputs for reduced loading TYPE TYPICAL PROPAGATION DELAY TYPICAL SUPPLY CURRENT (TOTAL) 74F365, 74F367 5.0ns 36mA 74F366, 74F368 5.0ns 33mA (20µA in High and Low states) • High-speed • Bus oriented • 3-State buffer outputs sink 64mA ORDERING INFORMATION COMMERCIAL RANGE DESCRIPTION VCC = 5V ±10%, ±10% Tamb = 0°C to +70°C 16-pin plastic DIP N74F365N, N74F367N SOT38-4 16-pin plastic SO N74F365D, N74F367D SOT109-1 PKG DWG # INPUT AND OUTPUT LOADING AND FAN-OUT TABLE 74F(U.L.) HIGH/LOW LOAD VALUE HIGH/LOW 1.0/0.033 1.0/0.033 20µA/20µA 20µA/20µA Y0 - Y5, Y0 - Y5 Data Outputs 750/106.7 NOTE: One (1.0) FAST Unit Load (U.L.) is defined as: 20µA in the High state and 0.6mA in the Low state. 15mA/64mA PINS DESCRIPTION I0 - I5 OE0, OE1 Inputs Output enable inputs (active Low) PIN CONFIGURATION LOGIC SYMBOL (IEEE/IEC) 74F365 74F365 OE0 1 16 VCC 1 & EN 15 I0 2 15 OE1 Y0 3 14 I5 I1 4 13 Y5 Y1 5 12 I4 I2 6 11 Y4 Y2 7 10 I3 GND 8 9 Y3 2 3 4 5 6 7 10 9 12 11 14 13 SF00901 SF00899 PIN CONFIGURATION LOGIC SYMBOL 74F365 2 I0 4 I1 6 I2 74F366 10 I3 12 I4 14 I5 OE0 1 16 VCC I0 2 15 OE1 Y0 3 14 I5 4 13 Y5 1 OE0 I1 15 OE1 Y1 5 12 I4 I2 6 11 Y4 Y2 7 10 I3 GND 8 9 Y3 Y0 VCC = Pin 16 GND = Pin 8 3 Y1 5 Y2 7 Y3 9 Y4 11 Y5 13 SF00902 SF00900 * Discontinued part. Please see the Discontinued Products List. 1999 Jan 08 2 853–0042 20616 Philips Semiconductors Product specification 74F365, 74F366* 74F367, 74F368* Buffers/drivers LOGIC SYMBOL 1 15 LOGIC SYMBOL 74F367 74F366 6 10 2 4 I0 I1 I2 I3 12 14 I4 I5 2 4 6 I0 I1 Y0 3 OE0 1 OE0 OE1 15 OE1 VCC = Pin 16 GND = Pin 8 Y0 Y1 Y2 Y3 Y4 Y5 3 5 7 9 11 13 VCC = Pin 16 GND = Pin 8 10 12 14 I2 I3 I4 I5 Y1 Y2 Y3 Y4 Y5 5 7 9 11 13 SF00903 SF00906 LOGIC SYMBOL (IEEE/IEC) LOGIC SYMBOL (IEEE/IEC) 74F367 74F366 1 & EN 15 1 EN1 15 EN2 2 3 2 3 4 5 4 6 7 6 7 10 9 10 9 12 11 12 14 13 14 1 5 11 2 13 SF00904 SF00907 PIN CONFIGURATION PIN CONFIGURATION 74F367 OE0 1 I0 2 74F368 16 VCC 15 OE1 OE0 1 VCC I0 2 15 OE1 Y0 3 14 I5 Y0 3 14 I5 I1 4 13 Y5 I1 4 13 Y5 Y1 5 12 I4 Y1 5 12 I4 I2 6 11 Y4 I2 6 11 Y4 Y2 7 10 I3 GND 8 9 Y3 Y2 7 10 I3 GND 8 9 Y3 SF00908 SF00905 * Discontinued part. Please see the Discontinued Products List. 1999 Jan 08 16 3 Philips Semiconductors Product specification 74F365, 74F366* 74F367, 74F368* Buffers/drivers LOGIC SYMBOL LOGIC SYMBOL (IEEE/IEC) 74F368 74F368 2 4 I0 I1 6 I2 10 12 I3 14 I4 1 EN1 15 EN2 2 I5 3 1 1 OE0 4 15 OE1 6 7 10 9 Y0 Y1 Y2 Y3 Y4 Y5 12 11 2 14 3 VCC = Pin 16 GND = Pin 8 5 7 9 11 5 13 13 SF00910 SF00909 LOGIC DIAGRAMS 74F365 OE0 1 OE1 15 I0 2 I1 4 I2 6 74F367 74F366 OE0 1 OE1 15 3 Y0 I0 2 5 Y1 I1 4 7 Y2 I2 6 9 I3 10 Y3 3 Y0 5 Y1 7 Y2 9 Y3 2 I1 4 I2 6 3 Y0 I0 2 5 Y1 I1 4 7 Y2 I2 6 9 Y3 OE1 15 3 I3 10 11 Y4 13 Y5 I5 14 INPUTS = = = = OE1 L L L L X H H X High voltage level Low voltage level Don’t care High impedance “off” state 7 Y2 9 Y3 13 Y5 I5 14 FUNCTION TABLE for 74F367 and 74F368 OUTPUTS INPUTS OUTPUTS In Yn Yn OEn L H X X L H Z Z H L Z Z L L L H H X High voltage level Low voltage level Don’t care High impedance “off” state H L X Z * Discontinued part. Please see the Discontinued Products List. 1999 Jan 08 Y1 SF00911 FUNCTION TABLE for 74F365 and 74F366 H L X Z 5 11 Y4 I4 12 VCC = Pin 16 GND = Pin 8 OE0 Y0 OE1 15 I4 12 13 Y5 I5 14 I0 OE0 1 I3 10 11 Y4 I4 12 13 Y5 I5 14 OE0 1 I3 10 11 Y4 I4 12 74F368 4 = = = = In Yn Yn L H Z H L Z Philips Semiconductors Product specification 74F365, 74F366* 74F367, 74F368* Buffers/drivers ABSOLUTE MAXIMUM RATINGS (Operation beyond the limits set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free-air temperature range.) SYMBOL PARAMETER RATING UNIT V VCC Supply voltage range –0.5 to +7.0 VIN Input voltage range –0.5 to +7.0 V IIN Input current range –30 to +5 mA VOUT Voltage applied to output in High output state range –0.5 to 5.5 V IOUT Current applied to output in Low output state 128 mA Tamb Operating free-air temperature range 0 to +70 °C TSTG Storage temperature range –65 to +150 °C RECOMMENDED OPERATING CONDITIONS SYMBOL LIMITS PARAMETER UNIT MIN TYP MAX 5.0 5.5 VCC Supply voltage 4.5 VIH High-level input voltage 2.0 VIL Low-level input voltage 0.8 V IIK Input clamp current –18 mA IOH High-level output current –15 mA IOL Low-level output current 64 mA Tamb Operating free-air temperature range 70 oC 0 * Discontinued part. Please see the Discontinued Products List. 1999 Jan 08 5 V V Philips Semiconductors Product specification 74F365, 74F366* 74F367, 74F368* Buffers/drivers DC ELECTRICAL CHARACTERISTICS Over recommended operating free-air temperature range unless otherwise noted. LIMITS SYMBOL TEST CONDITIONSNO TAG PARAMETER MIN TYP UNIT MAX NO TAG VCC = MIN, VIL = MAX, VIH = MIN, IOH = –3mA VOH O High level output voltage High-level VCC = MIN, VIL = MAX, VIH = MIN, IOH = –15mA 10%VCC 2.4 5%VCC 2.7 10%VCC 2.0 V 5%VCC 2.0 V 0.55 V 0.55 V –0.73 –1.2 V 100 20 –20 µA µA µA VCC = MAX, VO = 2.7V 50 µA VCC = MAX, VO = 0.5V –50 µA VIK Input clamp voltage II IIH IIL Input current at maximum input voltage High-level input current Low-level input current VCC = 0.0V, VI = 7.0V VCC = MAX, VI = 2.7V VCC = MAX, VI = 0.5V IOZH Off-state output current, High-level voltage applied IOZL Off-state output current, Low-level voltage applied IOS Short-circuit output currentNO TAG 5%VCC VCC = MIN, II = IIK VCC = MAX –100 –225 mA 25 35 mA 47 62 mA ICCZ 35 48 mA ICCH 18 25 mA 47 62 mA 35 48 ICCH Supply current (total) 74F366 74F368 V 0.42 Low level output voltage Low-level ICC 3.3 10%VCC VCC = MIN, VIL = MAX, VIH = MIN, IOL = MAX VOL O 74F365 74F367 V ICCL VCC = MAX ICCL VCC = MAX ICCZ mA NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25°C. 3. Not more than one output should be shorted at a time. For testing IOS, the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last. AC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL TA = +25°C VCC = +5.0V CL = 50pF, RL = 500Ω TEST CONDITIONS PARAMETER TA = -55°C to +125°C VCC = +5.0V ± 10% CL = 50pF, RL = 500Ω MIN TYP MAX MIN MAX UNIT tPLH tPHL Propagation delay In to Yn 74F366, 74F368 Waveform 1 3.0 2.0 5.0 3.0 6.5 5.0 3.0 1.5 7.5 5.5 ns ns tPLH tPHL Propagation delay In to Yn 74F365, 74F367 Waveform 2 2.5 2.5 4.5 5.5 6.5 7.0 2.0 2.0 7.0 7.5 ns ns tPZH tPZL Output Enable time to High or Low level 74F365, 74F366 Waveform 3 Waveform 4 2.5 2.5 4.0 5.0 6.5 8.0 2.5 2.5 7.5 8.5 ns ns tPZH tPZL Output Enable time to High or Low level 74F367, 74F368 Waveform 3 Waveform 4 3.0 3.0 5.5 6.5 7.5 8.5 3.0 3.0 8.5 9.0 ns ns tPHZ tPLZ Output Disable time from High to Low level Waveform 3 Waveform 4 2.0 2.0 4.5 4.0 6.5 6.5 2.0 2.0 7.0 7.0 ns ns * Discontinued part. Please see the Discontinued Products List. 1999 Jan 08 6 Philips Semiconductors Product specification 74F365, 74F366* 74F367, 74F368* Buffers/drivers AC WAVEFORMS For all waveforms, Vm = 1.5V In In VM VM VM tPHL VM tPLH tPLH tPHL Yn Yn VM VM VM VM SF00914 SF00912 Waveform 1. For Inverting Outputs OE VM Waveform 2. For Non-Inverting Outputs OE VM tPZH VM tPZL VOH -0.3V tPHZ Yn, Yn VM VM tPLZ 3.5V VM Yn, Yn 0V VOL +0.3V SF00913 SF00915 Waveform 3. 3-State Output Enable Time to High Level and Output Disable Time from High Level Waveform 4. 3-State Output Enable Time to Low Level and Output Disable Time from Low Level TEST CIRCUIT AND WAVEFORM VCC 7.0V VIN RL VOUT PULSE GENERATOR tw 90% NEGATIVE PULSE VM CL AMP (V) VM 10% D.U.T. RT 90% 10% tTHL (tf ) tTLH (tr ) tTLH (tr ) tTHL (tf ) 0V RL AMP (V) 90% 90% Test Circuit for 3-State Outputs POSITIVE PULSE VM VM 10% TEST tPLZ tPZL All other SWITCH closed closed open DEFINITIONS: RL = Load resistor; see AC electrical characteristics for value. CL = Load capacitance includes jig and probe capacitance; see AC electrical characteristics for value. RT = Termination resistance should be equal to ZOUT of pulse generators. 10% tw SWITCH POSITION 0V Input Pulse Definition INPUT PULSE REQUIREMENTS family amplitude VM 74F 3.0V 1.5V rep. rate tw tTLH tTHL 1MHz 500ns 2.5ns 2.5ns SF00777 * Discontinued part. Please see the Discontinued Products List. 1999 Jan 08 7 Philips Semiconductors Product specification 74F365, 74F366*, 74F367, 74F368* Buffers/drivers DIP16: plastic dual in-line package; 16 leads (300 mil) * Discontinued part. Please see the Discontinued Product List. 1999 Jan 08 8 SOT38-4 Philips Semiconductors Product specification 74F365, 74F366*, 74F367, 74F368* Buffers/drivers SO16: plastic small outline package; 16 leads; body width 3.9 mm * Discontinued part. Please see the Discontinued Product List. 1999 Jan 08 9 SOT109-1 Philips Semiconductors Product specification 74F365, 74F366*, 74F367, 74F368* Buffers/drivers Data sheet status Data sheet status Product status Definition [1] Objective specification Development This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. Preliminary specification Qualification This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. [1] Please consult the most recently issued datasheet before initiating or completing a design. Definitions Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381 print code Document order number: * Discontinued part. Please see the Discontinued Product List. yyyy mmm dd 10 Date of release: 10-98 9397-750-05118