NC7SZ08 TinyLogic® UHS 2-Input AND Gate tm Features General Description ■ Space saving SOT23 or SC70 5-lead package The NC7SZ08 is a single 2-Input AND Gate from Fairchild’s Ultra High Speed Series of TinyLogic®. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC range. The inputs and output are high impedance when VCC is 0V. Inputs tolerate voltages up to 6V independent of VCC operating voltage. ■ Ultra small MicroPak™ Pb-Free leadless package ■ Ultra High Speed; tPD 2.7ns Typ. into 50pF at 5V VCC ■ High Output Drive; ±24mA at 3V VCC ■ Broad VCC Operating Range; 1.65V to 5.5V ■ Matches the performance of LCX when operated at 3.3V VCC ■ Power down high impedance inputs/output ■ Overvoltage tolerant inputs facilitate 5V to 3V translation ■ Patented noise/EMI reduction circuitry implemented ■ All packages are Pb-Free Ordering Information Package Number Product Code Top Mark Pb-Free NC7SZ08M5X MA05B 7Z08 Yes 5-Lead SOT23, JEDEC MO-178, 1.6mm 3k Units on Tape and Reel NC7SZ08M5_NL(1) MA05B 7Z08 Yes Pb-Free 5-Lead SOT23, JEDEC MO-178, 1.6mm 250 Units on Tape and Reel NC7SZ08M5X_NL (2) MA05B 7Z08 Yes Pb-Free 5-Lead SOT23, JEDEC MO-178, 1.6mm 3k Units on Tape and Reel NC7SZ08P5X MAA05A Z08 Yes 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3k Units on Tape and Reel NC7SZ08P5_NL (1) MAA05A Z08 Yes Pb-Free 5-Lead SC70, EIAJ 250 Units on SC-88a, 1.25mm Wide Tape and Reel NC7SZ08P5X_NL (2) MAA05A Z08 Yes 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3k Units on Tape and Reel NC7SZ08L6X MAC06A GG Yes Pb-Free 6-Lead MicroPak, 1.0mm Wide 5k Units on Tape and Reel Order Number Package Description Supplied As Notes: Pb-Free package per JEDEC J-STD-020B. 1. “_NL” indicates lead-free product (per JEDEC J-STD-020B). 2. “_NL” indicates lead-free product (per JEDEC J-STD-020B). Device is available in Tape and Reel only. TinyLogic® is a registered trademark of Fairchild Semiconductor Corporation. MicroPak™ is a trademark of Fairchild Semiconductor Corporation. ©2006 Fairchild Semiconductor Corporation NC7SZ08 Rev. 1.0.0 1 www.fairchildsemi.com NC7SZ08 TinyLogic® UHS 2-Input AND Gate December 2006 Pin Descriptions IEEE/IEC A & Pin Name Description A, B Data Inputs Y Outputs NC No Connect Y B Function Table Connection Diagrams Y = AB Inputs Pin Assignment for SC70 and SOT23 A 1 B 2 GND 3 5 4 VCC Y (Top View) Output A B Y L L L L H L H L L H H H H = HIGH Logic Level L = LOW Logic Level Pad Assignments for MicroPak A 1 6 VCC B 2 5 NC GND 3 4 Y (Top Through View) 2 NC7SZ08 Rev. 1.0.0 www.fairchildsemi.com NC7SZ08 TinyLogic® UHS 2-Input AND Gate Logic Symbol Symbol Parameter Rating VCC Supply Voltage -0.5V to +6V VIN DC Input Voltage -0.5V to +6V VOUT DC Output Voltage -0.5V to +6V IIK DC Input Diode Current @ VIN < -0.5V @ VIN > 6V -50mA +20mA DC Output Diode Current @ VOUT < -0.5V @ VOUT > 6V, VCC = GND -50mA +20mA IOUT DC Output Current ±50mA ICC / IGND DC VCC /GND Current ±50mA TSTG Storage Temperature TJ Junction Temperature under Bias 150°C TL Junction Lead Temperature (Soldering, 10 seconds) 260°C PD Power Dissipation @ +85°C SOT23-5 SC70-5 IOK -65°C to +150°C 200mW 150mW Recommended Operating Conditions(3) Symbol Parameter Rating VCC Supply Voltage Operation VCC Supply Voltage Data Retention VIN Input Voltage 0V to 5.5V VOUT Output Voltage 0V to VCC TA Operating Temperature tr, tf Input Rise and Fall Time VCC = 1.8V, 2.5V ±0.2V VCC = 3.3V ±0.3V VCC = 5.0V ±0.5V θJA 1.65V to 5.5V 1.5V to 5.5V -40°C to +85°C 0ns/V to 20ns/V 0ns/V to 10ns/V 0ns/V to 5ns/V Thermal Resistance SOT23-5 SC70-5 300°C/W 425°C/W Notes: 3. Unused inputs must be held HIGH or LOW. They may not float. 3 NC7SZ08 Rev. 1.0.0 www.fairchildsemi.com NC7SZ08 TinyLogic® UHS 2-Input AND Gate Absolute Maximum Ratings The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. TA = +25°C VCC (V) Min. VIH Symbol HIGH Level Input Voltage 1.65 to 1.95 0.75 x VCC 2.3 to 5.5 0.7 x VCC VIL LOW Level Input Voltage 1.65 to 1.95 VOH HIGH Level Output Voltage VIN VOL Parameter LOW Level Output Voltage Conditions Max. Min. Max. 0.75 x VCC V 0.25 x VCC 0.3 x VCC 1.55 1.65 1.55 1.8 1.7 1.8 1.7 2.3 2.2 2.3 2.2 3.0 2.9 3.0 2.9 4.5 4.4 4.5 4.4 V IOH = -4mA 1.65 1.29 1.52 1.29 2.3 1.9 2.15 1.9 IOH = -16mA 3.0 2.5 2.80 2.4 IOH = -24mA 3.0 2.4 2.68 2.3 IOH = -32mA 4.5 3.9 4.20 VIN = VIL, IOL = 100µA 1.65 0.0 0.1 0.1 1.8 0.0 0.1 0.1 2.3 0.0 0.1 0.1 3.0 0.0 0.1 0.1 4.5 0.0 0.1 0.1 3.8 IOL = 4mA 1.65 0.08 0.24 0.24 IOL = 8mA 2.3 0.10 0.3 0.3 IOL = 16mA 3.0 0.15 0.4 0.4 IOL = 24mA 3.0 0.22 0.55 0.55 4.5 0.22 Input Leakage Current VIN = 5.5V, GND IOFF Power Off Leakage Current VIN or VOUT = 5.5V ICC Quiescent Supply Current VIN = 5.5V, GND V 0.3 x VCC 1.65 IOH = -8mA IIN Units 0.7 x VCC 0.25 x VCC 2.3 to 5.5 VIN = VIH, IOH = -100µA IOL = 32mA V 0.55 0.55 0 to 5.5 ±1 ±10 µA 0.0 1 10 µA 1.65 to 5.5 2.0 20 µA 4 NC7SZ08 Rev. 1.0.0 Typ. −40°C to +85°C www.fairchildsemi.com NC7SZ08 TinyLogic® UHS 2-Input AND Gate DC Electrical Characteristics TA = +25°C Symbol Parameter Conditions CL = 15pF, RL = 1MΩ tPLH, tPHL Propagation Delay CL = 50pF, RL = 500Ω CIN Input Capacitance CPD Power Dissipation Capacitance VCC (V) Min. Typ. Max. Min. Max. 1.65 2.0 6.3 12 2.0 12.7 1.8 2.0 5.2 10 2.0 10.5 2.5±0.2 0.8 3.4 7 0.8 7.5 3.3±0.3 0.5 2.6 4.7 0.5 5.0 5.0±0.5 0.5 2.2 4.1 0.5 4.4 3.3±0.3 1.5 3.3 5.2 1.5 5.5 5.0±0.5 0.8 2.7 4.5 0.8 4.8 0 Note 2 −40°C to +85°C Figure Units Number ns 4 pF 3.3 20 pF 5.0 25 Figure 1 Figure 3 Figure 2 Note: 2. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (CPD) (VCC) (fIN) + (ICC static) AC Loading and Waveforms VCC Output Input CL* RL *CL includes load and stray capacitance. Input PRR = 1.0MHz; tW = 500ns tFALL = 3ns tRISE = 3ns VCC Figure 1. AC Test Circuit 90% Input 90% 50% GND 50% 10% 10% tW VCC tPLH A tPHL VOH Output Input 50% 50% VOL Figure 3. AC Waveforms Input = AC Waveform; tr, tf = 1.8ns; PRR = 10MHz; Duty Cycle = 50% Figure 2. ICCD Test Circuit 5 NC7SZ08 Rev. 1.0.0 www.fairchildsemi.com NC7SZ08 TinyLogic® UHS 2-Input AND Gate AC Electrical Characteristics Tape Format for SC70 and SOT23 Package Designator Tape Section Number Cavities Cavity Status Cover Tape Status M5X, P5X Leader (Start End) 125 (typ) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed Tape Dimension inches (millimeters) Package Tape Size Dim A Dim B Dim F Dim KO Dim P1 Dim W SC70-5 8 mm 0.093 (2.35) 0.096 (2.45) 0.138±0.004 (3.5±0.10) 0.053±0.004 (1.35±0.10) 0.157 (4) 0.315±0.004 (8±0.1) SOT23-5 8 mm 0.130 (3.3) 0.130 (3.3) 0.138±0.002 (3.5±0.05) 0.055±0.004 (1.4±0.11) 0.157 (4) 0.315±0.012 (8±0.3) 6 NC7SZ08 Rev. 1.0.0 www.fairchildsemi.com NC7SZ08 TinyLogic® UHS 2-Input AND Gate Tape and Reel Specification Tape Format for MicroPak Package Designator Tape Section Number Cavities Cavity Status Cover Tape Status P6X Leader (Start End) 125 (typ) Empty Sealed Carrier 5000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed Tape Dimension millimeters 7 NC7SZ08 Rev. 1.0.0 www.fairchildsemi.com NC7SZ08 TinyLogic® UHS 2-Input AND Gate Tape and Reel Specification (Continued) NC7SZ08 TinyLogic® UHS 2-Input AND Gate Tape and Reel Specification (Continued) Reel Dimension for MicroPak inches (millimeters) Tape Size A B C D N W1 W2 W3 8mm 7.0 (177.8) 0.059 (1.50) 0.512 (13.00) 0.795 (20.20) 2.165 (55.00) 0.331 + 0.059/−0.000 (8.40 + 1.50/−0.00) 0.567 (14.40) W1 + 0.078/−0.039 (W1 + 2.00/−1.00) 8 NC7SZ08 Rev. 1.0.0 www.fairchildsemi.com NC7SZ08 TinyLogic® UHS 2-Input AND Gate Physical Dimensions millimeters unless otherwise noted 5-Lead SOT23, JEDEC MO-178, 1.6mm Package Number MA05B 9 NC7SZ08 Rev. 1.0.0 www.fairchildsemi.com NC7SZ08 TinyLogic® UHS 2-Input AND Gate Physical Dimensions millimeters unless otherwise noted (Continued) 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide Package Number MAA05A 10 NC7SZ08 Rev. 1.0.0 www.fairchildsemi.com NC7SZ08 TinyLogic® UHS 2-Input AND Gate Physical Dimensions millimeters unless otherwise noted (Continued) 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A 11 NC7SZ08 Rev. 1.0.0 www.fairchildsemi.com The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. FACT Quiet Series™ GlobalOptoisolator™ GTO™ HiSeC™ I2C™ i-Lo™ ImpliedDisconnect™ IntelliMAX™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ ACEx™ ActiveArray™ Bottomless™ Build it Now™ CoolFET™ CROSSVOLT™ DOME™ EcoSPARK™ E2CMOS™ EnSigna™ FACT® FAST® FASTr™ FPS™ FRFET™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ ScalarPump™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ TinyBoost™ TinyBuck™ TinyPWM™ TinyPower™ TinyLogic® TINYOPTO™ TruTranslation™ UHC® UniFET™ UltraFET® VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I21 12 NC7SZ08 Rev. 1.0.0 www.fairchildsemi.com NC7SZ08 TinyLogic® UHS 2-Input AND Gate FAIRCHILD SEMICONDUCTOR TRADEMARKS