Volant NEA016 Series Non-Isolated 16A SIP/SMT DC/DC Converters Features: 9 Small size, minimal footprint – SMT/SIP package 9 16A Output Current (all voltages) 9 High Efficiency: up to 94% 9 High reliability 9 RoHS Compliant 9 Cost efficient open frame design 9 Output voltage programmable by an external resistor. 9 Monotonic Start with Pre-Bias. 9 +ve Enable Logic and –ve Enable Logic models available Output PARD (mVp-p) Regulation Max Input Vin Nom. (V) Range (V) Iin Typ (A) Efficiency Vout (V) Iout (A) 0.75 16 Typ. 50 Max. 75 Line +/-0.2% Load +/-0.5% 12 8.3 – 14 1.299 Typ. 77% 1.2 16 50 75 +/-0.2% +/-0.5% 12 8.3 – 14 1.928 83% 1.5 16 50 75 +/-0.2% +/-0.5% 12 8.3 – 14 2.326 86% 1.8 16 50 75 +/-0.2% +/-0.5% 12 8.3 – 14 2.727 88% 2.0 16 50 75 +/-0.2% +/-0.5% 12 8.3 – 14 2.996 89% 2.5 16 50 75 +/-0.2% +/-0.5% 12 8.3 – 14 3.704 90% 3.3 16 50 75 +/-0.2% +/-0.5% 12 8.3 – 14 4.783 92% 5.0 16 50 75 +/-0.2% +/-0.5% 12 8.3 – 14 7.092 94% Full Load Technical enquiries email: [email protected], tel: +508 339 3000 1 NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters Input Characteristics Input Voltage Operating Range Input Reflected Ripple Current Inrush Current Transient Input Filter Type (external) Input Turn ON Threshold Input Turn OFF Threshold ON Control OFF Control Notes & Conditions Output Characteristics Vout Accuracy Output Loading Output Ripple & Noise @ 20Mhz Bandwidth. Maximum Capacitive Load Vout Trim Range (Nom) Total Accuracy Current Limit Output Line Regulation Output Load Regulation Turn-on Overshoot SC Protection Technique Pre-bias Start-up at output Notes & Conditions 100% load Dynamic Characteristics Load Transient Frequency Rise Time Start-Up Time General Specifications MTBF Thermal Protection Operating Temperature Operating Ambient Temperature SIP Dimensions SMT Dimensions SIP Pin Dimensions SMT Block Dimensions Pin and Block Material Weight Flammability Rating Min 8.3 Typ. 12 200 Max 14 0.2 Units Vdc mA p-p A2s μF V V Max +1.5 16 75 Units % A MVp-p 8000 5.0 μF V +0.2 +0.5 1 A % % % 100 8.5 8.0 Open Circuit or =Vin < 0.4Vdc Min -1.5 0 Typ. Low ESR 0.75 Over line/load temperature <2% 23 -0.2 -0.5 Hiccup with auto recovery Unit starts monotonically with prebias Notes & Conditions 50% step, 0.1A/μs Settling Time Min Max 100 200 Units mV μs KHz ms ms Max Units x106 Hrs x106 Hrs °C °C °C 300 3.5 7 10% Vo to 90% Vo Vin to Vout and On/Off to Vout Vout rise to monotonic Notes & Conditions Calculated (MIL-HDBK-217F) Calculated (Bellcore TR-332, Issue 6) Hotspot Without derating 300LFM See Power derating curve 2”Lx0.327”Wx0.512”H (50.8x8.3x13.0mm) 1.30”Lx0.53”Wx0.366”H (33x13.46x9.3mm) 0.025” (0.64mm) SQUARE 0.063” x0.065” x 0.112” SQUARE Matte Sn Finish on component Leads Typ. Min Typ. 1.0 4.78 110 -40 -40 50 85 0.64 mm 10 g UL94V-0 2 NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters Standards Compliance CSA C22.2, No.60950/UL 60950, Third Edition (2000), File UL E165113 Thermal Considerations The power module operates in a variety of thermal environments; however, sufficient cooling should be provided to help ensure reliable operation of the unit. The thermal data presented is based on measurements taken at various airflows. Note that airflow is parallel to the long axis of the module as shown in Figure 1 and derating applies accordingly. Figure 1. Thermal Tests Set-Up. The temperature at either location should not exceed 110°C. The output power of the module should not exceed the rated power for the module(Vo,set X Io,max). Convection Requirements for Cooling To predict the approximate cooling needed for the module, refer to the Power Derating Curves in Figures 2-17 . These derating curve are approximations of the ambient temperature and airflow required to keep the power module temperature below it's maximum rating. Once the module is assembled in the actual system, the module's temperature should be verified. 3 NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters TYPICAL DERATING CURVES SIP/SMT VERSION NEA0161501S Vo=0.75V Derating Curve 18 Output Current (A) 16 14 12 10 0LFM 100LFM 200LFM 300LFM 8 6 4 2 0 20 30 40 50 60 70 80 90 100 Ambient Temperature(C) Fig. 2. SMT Power Derating vs Output Current for 12Vin 0.75V Out. NEA0161501B Vo=0.75V Derating Curve 18 Output Current (A) 16 14 12 10 0LFM 100LFM 200LFM 300LFM 8 6 4 2 0 20 30 40 50 60 70 80 90 100 Ambient Temperature(C) Fig. 3. SIP Power Derating vs Output Current for 12Vin 0.75V Out. 4 NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters NEA0161501S Vo=1.2V Derating Curve 18 Output Current (A) 16 14 12 10 0LFM 100LFM 200LFM 300LFM 8 6 4 2 0 20 30 40 50 60 70 80 90 100 Ambient Temperature(C) Fig 4. SMT Power Derating vs Output Current for 12Vin 1.2V Out. NEA0161501B Vo=1.2V Derating Curve 18 Output Current (A) 16 14 12 10 0LFM 100LFM 200LFM 300LFM 8 6 4 2 0 20 30 40 50 60 70 80 90 100 Ambient Temperature(C) Fig 5. SIP Power Derating vs Output Current for 12Vin 1.2V Out. 5 NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters NEA0161501S Vo=1.5V Derating Curve 18 Output Current (A) 16 14 12 10 0LFM 100LFM 200LFM 300LFM 8 6 4 2 0 20 30 40 50 60 70 80 90 100 Ambient Temperature(C) Fig 6. SMT Power Derating vs Output Current for 12Vin 1.5V Out. NEA0161501B Vo=1.5V Derating Curve 18 Output Current (A) 16 14 12 10 0LFM 100LFM 200LFM 300LFM 8 6 4 2 0 20 30 40 50 60 70 80 90 100 Ambient Temperature(C) Fig 7. SIP Power Derating vs Output Current for 12Vin 1.5V Out. 6 NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters NEA0161501S Vo=1.8V Derating Curve 18 Output Current (A) 16 14 12 10 0LFM 100LFM 200LFM 300LFM 8 6 4 2 0 20 30 40 50 60 70 80 90 100 Ambient Temperature(C) Fig 8. SMT Power Derating vs Output Current for 12Vin 1.8V Out. NEA0161501B Vo=1.8V Derating Curve 18 Output Current (A) 16 14 12 10 0LFM 100LFM 200LFM 300LFM 8 6 4 2 0 20 30 40 50 60 70 80 90 100 Ambient Temperature(C) Fig 9. SIP Power Derating vs Output Current for 12Vin 1.8V Out. 7 NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters NEA0161501S Vo=2.0V Derating Curve 18 Output Current (A) 16 14 12 10 0LFM 100LFM 200LFM 300LFM 8 6 4 2 0 20 30 40 50 60 70 80 90 100 Ambient Temperature(C) Fig 10. SMT Power Derating vs Output Current for 12Vin 2.0V Out. NEA0161501B Vo=2.0V Derating Curve 18 Output Current (A) 16 14 12 10 0LFM 100LFM 200LFM 300LFM 8 6 4 2 0 20 30 40 50 60 70 80 90 100 Ambient Temperature(C) Fig 11. SIP Power Derating vs Output Current for 12Vin 2.0V Out. 8 NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters NEA0161501S Vo=2.5V Derating Curve 18 Output Current (A) 16 14 12 10 0LFM 100LFM 200LFM 300LFM 8 6 4 2 0 20 30 40 50 60 70 80 90 100 Ambient Temperature(C) Fig 12. SMT Power Derating vs Output Current for 12Vin 2.5V Out. NEA0161501B Vo=2.5V Derating Curve 18 Output Current (A) 16 14 12 10 0LFM 100LFM 200LFM 300LFM 8 6 4 2 0 20 30 40 50 60 70 80 90 100 Ambient Temperature(C) Fig 13. SIP Power Derating vs Output Current for 12Vin 2.5V Out. 9 NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters NEA0161501S Vo=3.3V Derating Curve 18 Output Current (A) 16 14 12 10 0LFM 100LFM 200LFM 300LFM 8 6 4 2 0 20 30 40 50 60 70 80 90 100 Ambient Temperature(C) Fig. 14. SMT Power Derating vs Output Current for 12Vin 3.3V Out. NEA0161501B Vo=3.3V Derating Curve 18 Output Current (A) 16 14 12 10 0LFM 100LFM 200LFM 300LFM 8 6 4 2 0 20 30 40 50 60 70 80 90 100 Ambient Temperature(C) Fig 15. SIP Power Derating vs Output Current for 12Vin 3.3V Out. 10 NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters NEA0161501S Vo=5.0V Derating Curve 18 Output Current (A) 16 14 12 10 0LFM 100LFM 200LFM 300LFM 8 6 4 2 0 20 30 40 50 60 70 80 90 100 Ambient Temperature(C) Fig. 16. SMT Power Derating vs Output Current for 12Vin 5.0V Out NEA0161501B Vo=5.0V Derating Curve 18 Output Current (A) 16 14 12 0LFM 100LFM 200LFM 300LFM 10 8 6 4 2 0 20 30 40 50 60 70 80 90 100 Ambient Temperature(C) Fig 17. SIP Power Derating vs Output Current for 12Vin 5.0V Out. 11 NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters TYPICAL EFFICIENCY CURVES FOR VARIOUS VOLTAGE MODELS SIP/SMT VERSION. NEA0161501S (Eff Vs Io) Vout=0.75V 100% 95% Efficincy (%) 90% 85% 80% 75% 70% 9V 12V 14V 65% 60% 55% 50% 0 2 4 6 8 10 12 14 16 Current Load (A) Fig 18. SMT Efficiency Curves for Vout=075V (25C) NEA0161501B (Eff Vs Io) Vout=0.75V 100% 95% Efficincy (%) 90% 85% 80% 75% 70% 9V 12V 14V 65% 60% 55% 50% 0 2 4 6 8 10 12 14 16 Current Load (A) Fig 19. SIP Efficiency Curves for Vout=0.75V (25C) 12 NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters NEA0161501S (Eff Vs Io) Vout=1.2V 100% 95% Efficincy (%) 90% 85% 9V 12V 14V 80% 75% 70% 65% 60% 0 2 4 6 8 10 12 14 16 Current Load (A) Fig 20. SMT Efficiency Curves for Vout=1.2V (25C) NEA0161501B (Eff Vs Io) Vout=1.2V 100% 95% Efficincy (%) 90% 85% 80% 9V 12V 14V 75% 70% 65% 60% 0 2 4 6 8 10 12 14 16 Current Load (A) Fig 21. SIP Efficiency Curves for Vout=1.2V (25C) 13 NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters NEA0161501S (Eff Vs Io) Vout=1.5V 100% 95% Efficincy (%) 90% 85% 80% 9V 12V 14V 75% 70% 65% 60% 0 2 4 6 8 10 12 14 16 Current Load (A) Fig 22. SMT Efficiency Curves for Vout=1.5V (25C) NEA0161501B (Eff Vs Io) Vout=1.5V 100% 95% Efficincy (%) 90% 85% 80% 9V 12V 14V 75% 70% 65% 60% 0 2 4 6 8 10 12 14 16 Current Load (A) Fig 23. SIP Efficiency Curves for Vout=1.5V (25C) 14 NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters NEA0161501S (Eff Vs Io) Vout=1.8V 100% 95% Efficincy (%) 90% 85% 9V 12V 14V 80% 75% 70% 65% 60% 0 2 4 6 8 10 12 14 16 Current Load (A) Fig 24. SMT Efficiency Curves for Vout=1.8V (25C) NEA0161501B (Eff Vs Io) Vout=1.8V 100% Efficincy (%) 95% 90% 85% 80% 9V 12V 14V 75% 70% 65% 60% 0 2 4 6 8 10 12 14 16 Current Load (A) Fig 25. SIP Efficiency Curves for Vout=1.8V (25C) 15 NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters NEA0161501S (Eff Vs Io) Vout=2.0V 100% Efficincy (%) 95% 90% 9V 12V 14V 85% 80% 75% 70% 0 2 4 6 8 10 12 14 16 Current Load (A) Fig 26. SMT Efficiency Curves for Vout=2.0V (25C) NEA0161501B (Eff Vs Io) Vout=2.0V 100% Efficincy (%) 95% 90% 85% 9V 12V 14V 80% 75% 70% 0 2 4 6 8 10 12 14 16 Current Load (A) Fig 27. SIP Efficiency Curves for Vout=2.0V (25C) 16 NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters NEA0161501S (Eff Vs Io) Vout=2.5V 100% Efficincy (%) 95% 90% 85% 9V 12V 14V 80% 75% 70% 0 2 4 6 8 10 12 14 16 Current Load (A) Fig 28. SMT Efficiency Curves for Vout=2.5V (25C) NEA0161501B (Eff Vs Io) Vout=2.5V 100% Efficincy (%) 95% 90% 85% 9V 12V 14V 80% 75% 70% 0 2 4 6 8 10 12 14 16 Current Load (A) Fig 29. SIP Efficiency Curves for Vout=2.5V (25C) 17 NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters NEA0161501S (Eff Vs Io) Vout=3.3V 100% Efficincy (%) 95% 90% 9V 12V 14V 85% 80% 75% 70% 0 2 4 6 8 10 12 14 16 Current Load (A) Fig 30. SMT Efficiency Curves for Vout=3.3V (25C) NEA0161501B (Eff Vs Io) Vout=3.3V 100% Efficincy (%) 95% 90% 85% 9V 12V 14V 80% 75% 70% 0 2 4 6 8 10 12 14 16 Current Load (A) Fig 31. SIP Efficiency Curves for Vout=3.3V (25C) 18 NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters NEA0161501S (Eff Vs Io) Vout=5V 100% 90% 9V 12V 14V 85% 80% 75% 70% 0 2 4 6 8 10 12 14 16 Current Load (A) Fig 32. SMT Efficiency Curves for Vout=5.0V (25C) NEA0161501B (Eff Vs Io) Vout=5V 100% 95% Efficincy (%) Efficincy (%) 95% 90% 85% 9V 12V 14V 80% 75% 70% 0 2 4 6 8 10 12 14 16 Current Load (A) Fig 33. SIP Efficiency Curves for Vout=5.0V (25C) 19 NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters Typical Start Up Ch1. Vin Ch2. Vout, Full load. Ch3. Q1-Vgs Ch4. Q2-Vgs Typical Start Up with pre-bias Ch1 : Enable Ch2 : Vout Ch3 : Output current at Full Load. 20 NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters Typical Output Noise and Ripple Vin = 12Vdc , Vo=5.0V/16A Output with 1uF ceramic and 10uF tantalum capacitor Typical Output Transient Response Vin = 12Vdc , Vo=5.0V , 50% - 100% - 50% Load change , @0.1A/uS 21 NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters Output Voltage Set point adjustment. The following relationship establish the calculation of external resistors: Radj = ( 15 × 0.7 ) − 1 (K Ω ) Vo − 0.7525 For Vout setting an external resistor is connected between the TRIM and Ground Pin. Resistor values for different output voltages are calculated as given in the table: Vo, set (Volts) RAdj (KΩ) 0.75 1.2 1.5 1.8 2.0 2.5 3.3 5.0 Open 22.46 13.05 9.024 7.417 5.009 3.122 1.472 Remote Sense: All MURATA POWER SOLUTIONS SMT/SIP power modules offer an option for remote sense. The remote sense compensates for any distribution drops to accurately control voltage at the point of load. The voltage between the sense pin to Vout pin should not exceed 0.5V. 22 NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters SMT Lead free Reflow profile 1. Ramp up rate during preheat : 1.33 ℃/Sec ( From 30℃ to 150℃ ) 2. Soaking temperature : 0.29 ℃/Sec ( From 150℃ to 180℃ ) 3. Ramp up rate during reflow : 0.8 ℃/Sec ( From 220℃ to 250℃ ) 4. Peak temperature : 250℃, above 220℃ 40 to 70 Seconds 5. Ramp up rate during cooling : -1.56 ℃/Sec ( From 220℃ to 150℃ ) Mechanical and pinning Information. Given below is the outline drawing showing physical dimensions of the SIP & SMT package. The external dimensions for SMT package are 33.00mm X 13.46mm X 9.3mm. BOTTOMVIEWOFBOARD RecommendedPadLayout 33.0 (1.30) 7.87 4.83 (0.310) (0.190) COM 9.30 (0.366) max. 4.83 (0.190) +VO 4.83 7.54 (0.190) (0.297) TRIM (0.297) +SENSE 4.83 (0.190) 10.29 (0.405) TRIM +VO 0.64 (0.025) 1.91 (0.075) 1.22 (0.048) L1INDUCTOR Dimensionsareinmillimeters(Inches) Tolerances: X.X0.5mm(0.02in), X.XX0.25mm(0.010in),unlessotherwisenoted. 23 7.87 (0.310) COM 10.92 (0.430) TopViewof Board ON/OFF SURFACEMOUNTCONTACT 2.84 (0.112) 4.83 (0.190) +SENSE 13.46 (0.530) ON/OFF +VIN 4.83 (0.190) 7.54 1.65 (0.065) 10.29 (0.405) 1.60 (0.063) Dimensionsareinmillimetesand(inches) +VIN 29.90 (1.177) PADSIZE MIN:3.556x2.413(0.140x0.095) MAX:4.19x2.79(0.165x0.110) NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters Whereas, the external dimensions of the SIP version are 50.8mm X 12.70mm X 8.30mm. SIZE SIP 0.327(8.30)max. 2.00(50.8) 0.23(5.8) 6 7 8 9 10 11 1 2 3 4 5 0.14(3.6) 0.50(12.70) 0.010(0.25) min. 0.025(0.64) 0.100(2.54) 0.050(1.30) 1.000(25.40) 0.28(7.1) 0.025(0.64) 0.400(10.20) 0.29(7.4) LAYOUT PATTERN TOP VIEW 0.33(8.4) All Dimmension In Inches(mm) Tolerance : .XX= 0.02 ( .X= 0.5 ) .XXX= 0.010 ( .XX= 0.25 ) 1.1mmPLATED THROUGH HOLE 1.6mmPAD SIZE PIN CONNECTION Pin FUNCTION +Output 1 +Output 2 3 +Sense 4 +Output 5 Common Common 6 +V Input 7 +V Input 8 No Pin 9 10 Trim 11 On/Off Control Safety Considerations The NEA series of converters are certified to IEC/EN/CSA/UL 60950. If this product is built into information technology equipment, the installation must comply with the above standard. An external input fuse (no more 20 A recommended) must be used to meet the above requirements. The output of the converter [Vo(+)/Vo(-)] is considered to remain within SELV limits when the input to the converter meets SELV or TNV-2 requirements. The converters and materials meet UL 94V-0 flammability ratings. Ordering Information Part Number NEA0161500B0C NEA0161500S0C NEA0161501B0C NEA0161501S0C Vin 8.3V - 14.0V 8.3V - 14.0V 8.3V - 14.0V 8.3V - 14.0V Vout 0.75V – 5.0V 0.75V – 5.0V 0.75V – 5.0V 0.75V – 5.0V Iout Enable Logic 16A Negative 16A Negative 16A Positive 16A Positive 24 Pin Length 0.139" SMT 0.139" SMT NEA016_6200860000_B01_21/04/08 Volant NEA016 Series Murata Power Solutions Non-Isolated 16A SIP/SMT DC/DC Converters Label Information NEA0161500B0–XC C = RoHS Compliant Iout X = Factory control character (not required when ordering) Vout 0 = Standard. (No PGood option) P = Power Good Option Place Holder Vout Range F=Fixed A=Adjustable Vin (value or range) C= 3.3V-5.0V E= 8.3V-14V F= 6.0V-14V Pin Length Option B=0.139” S=SMT Enable Logic, 0 for–ve, 1 for +ve Non-Isolated Family RoHS Compliant The NEA016 series of converters is in compliance with the European Union Directive 2002/95/EC (RoHS) with repsect to the following sustances: lead (Pb), mercury (Hg), cadmium (Cd), hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). 25 NEA016_6200860000_B01_21/04/08