Multilayer Ceramic Chip Capacitors NCA Series FEATURES • STANDARD EIA 1206 & 0805 PACKAGING • EACH COMPONENT CONTAINS 4 ISOLATED CERAMIC CAPACITORS • AVAILABLE IN A WIDE RANGE OF VALUES AND TEMPERATURE ..COEFFICIENTS SPECIFICATIONS OPERATING TEMPERATURE CAPACITANCE RANGE VOLTAGE RANGE CAPACITANCE TOLERANCE TEMPERATURE CHARACTERISTICS DIELECTRIC WITHSTANDING VOLTAGE INSULATION RESISTANCE (after 1 minute) DISSIPATION FACTOR NPO X7R RoHS Compliant includes all homogeneous materials *See Part Number System for Details Y5V -55°C~ +125°C -55°C~ +125°C -30°C~ +85°C 10pF ~ 1000pF 100pF ~ 0.1µF SEE VALUES TABLES 0.01µF ~ 0.33µF ±5% (J) ±10%(K), ±20%(M) +80%/-20% (Z) 0±30ppm ±15% +30% ~ -80% 2.5 x Rated Voltage for 1 minute >100GΩ >10GΩ >10GΩ < 0.1% < 5% < 7% STANDARD VALUES AND VOLTAGES PART DIMENSIONS (mm) 16 10pF ‡ 22pF ‡ 33pF ‡ 47pF ‡ 68pF ‡ 82pF ‡ 100pF ¤‡ 220pF ¤‡ 330pF ‡ 470pF ‡ 680pF ‡ 820pF ‡ ‡ .001µF .0022µF .0033µF .0047µF .0068µF .0082µF .01µF .022µF .033µF .047µF .068µF .082µF 0.1µF 0805 Values 25 ¤‡ ¤‡ ¤‡ ¤‡ ¤‡ ¤‡ ¤‡ ‡ ‡ ‡ ‡ ‡ ‡ ¤ X7R Y5V Working Voltage (Vdc) 50 100 10 16 25 50 100 16 25 50 ¤‡ ‡ ¤‡ ‡ ¤‡ ‡ ¤‡ ‡ ¤‡ ‡ ¤‡ ‡ ¤‡ ‡ ¤ ¤ ‡ ‡ ¤ ¤ ‡ ‡ ¤ ¤ ‡ ‡ ¤‡ ¤‡ ‡ ‡ ‡ ¤‡ ¤‡ ‡ ‡ ‡ ¤‡ ¤‡ ‡ ‡ ‡ ¤‡ ¤‡ ‡ ‡ ¤‡ ¤‡ ‡ ‡ ¤‡ ¤ ‡ ‡ ¤‡ ¤ ‡ ‡ ¤‡ ¤ ‡ ‡ ¤‡ ‡ ‡ ‡ ¤ ¤‡ ‡ ‡ ‡ ‡ ‡ ‡ ¤ ‡ ‡ ‡ ‡ ‡ ‡ ¤ ‡ ‡ ‡ ‡ ‡ ‡ ¤ ‡ ‡ ‡ ‡ ‡ ¤ ‡ ‡ ‡ ‡ ¤ ‡ ‡ ‡ ¤* ‡ ‡ ‡ 1206 Values ‡ Series L W H S T B NPO Cap. NCA0805 2.00 ± 0.20 1.25 ± 0.20 1.00 max. 0.50 ± 0.10 0.28 ± 0.10 0.25 ±0.15 NCA1206 3.20 ± 0.20 1.80 ± 0.20 1.30 max. 0.80 ± 0.20 0.40 ± 0.10 0.30 ± 0.20 L B T W S H Termination: Solder plating over nickel barrier RECOMMENDED LAND PATTERN (mm) Series NCA0805 NCA1206 * X5R TC -55°C ~ +85°C A 1.65 ± 0.10 2.60 ± 0.10 B 0.55 ± 0.05 0.80 ± 0.05 C 0.5 ± 0.05 0.8 ± 0.10 D 0.25 ± 05 0.45 ±0.1 D A B C ® 32 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors PART NUMBER SYSTEM NCA 0805 X7R 103 K 10 TRP F Series NCA Series RoHS compliant Tape & Reel (Paper carrier) Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros, “R” indicates ecimal for under 10pF Temperature Characteristic Size Code (see chart) TAPE DIMENSIONS (mm) A0 B0 F G K P0 P1 P2 T W See note 1 3.50 ±0.05 1.75 ±0.1 2.50 max. 4.0 ±0.1 4.0 ±0.1 2.0 ±0.05 0.6 max. 8.0 ±0.3 Note 1 - These dimensions are deterined by the maximum dimensions of the part. Clearance between the sides of the components shall be 0.05mm (min.) and 0.50mm (max). The clearance shall not allow the component to rotate more than 20° within the carrier cavity. φ1.5±0.1 Po T G P2 F W Bo Ao K REEL DIMENSIONS (mm) P1 E A B C D E W 178 ± 2.0 50 min. 13.0 ± 0.2 20.2 min. 1.5 min. 8.4 ± 1.0 C B D W ® NIC COMPONENTS CORP. A www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 33