!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. NTC Thermistors Cat.No.R44E-15 R44E.pdf Dec.17,2012 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. EU RoHS Compliant s s s All the products in this catalog comply with EU RoHS. EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment." For more details, please refer to our website 'Murata's Approach for EU RoHS' (http://www.murata.com/info/rohs.html). R44E.pdf Dec.17,2012 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 CONTENTS 1 Part Numbering 2 Basic Characteristics 6 1 Temperature Sensor and Compensation 0201 (0603) Size 7 2 Temperature Sensor and Compensation 0402 (1005) Size 8 3 Temperature Sensor and Compensation 0603 (1608) Size 10 4 Temperature Sensor and Compensation 0805 (2012) Size 12 Temperature Sensor and Compensation Chip Type Standard Land Pattern Dimensions 13 Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value) 14 Temperature Sensor and Compensation Chip Type !Caution/Notice 18 Temperature Sensor and Compensation Chip Type Package 22 5 6 Temperature Sensor Thermo String Type 25 Temperature Sensor Thermo String Type Specifications and Test Methods 26 Temperature Sensor Lead Type 28 Temperature Sensor Lead Type Specifications and Test Methods 29 Temperature Sensor Thermo String/Lead Type Temperature Characteristics (Center Value) 30 Temperature Sensor Thermo String/Lead Type !Caution/Notice 31 Temperature Sensor Thermo String/Lead Type Package 32 7 Inrush Current Suppression Lead Type 33 Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical) 35 Inrush Current Suppression Lead Type !Caution/Notice 38 Inrush Current Suppression Lead Type Package 40 2 3 4 5 6 7 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 o Part Numbering NTC Thermistors for Temp. Sensor and Compensation Chip Type (Part Number) NC P 18 XH 103 q w e r t 03 RB y u i J qProduct ID tResistance Product ID NC NTC Thermistors Chip Type wSeries Expressed by three-digit alphanumerics. The unit is ohm (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Ex. Code Resistance Code Series 102 1kΩ P Plated Termination Series 103 10kΩ 104 100kΩ eDimensions (LgW) yResistance Tolerance Code Dimensions (LgW) EIA 03 0.60g0.30mm 0201 Code Resistance Tolerance 15 1.00g0.50mm 0402 D ±0.5% 18 1.60g0.80mm 0603 F ±1% 21 2.00g1.25mm 0805 E ±3% J ±5% rTemperature Characteristics 2 uIndividual Specifications Code Temperature Characteristics XC Nominal B-Constant 3100e3149K Structures and others are expressed by two figures. XF Nominal B-Constant 3250e3299K Ex. XH Nominal B-Constant 3350e3399K XM Nominal B-Constant 3500e3549K XQ Nominal B-Constant 3650e3699K Code Individual Specifications 03 Standard Type iPackaging XV Nominal B-Constant 3900e3949K Code Packaging XW Nominal B-Constant 3950e3999K RA Plastic Taping 4mm Pitch (4000 pcs.) WB Nominal B-Constant 4050e4099K RB Paper Taping 4mm Pitch (4000 pcs.) WD Nominal B-Constant 4150e4199K RC Paper Taping 2mm Pitch (10000 pcs.) WF Nominal B-Constant 4250e4299K RL Paper Taping 2mm Pitch (15000 pcs.) WL Nominal B-Constant 4450e4499K WM Nominal B-Constant 4500e4549K R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 NTC Thermistor for Temperature Sensor Thermo String Type (Part Number) NXF T 15 XH 103 q w e r t F A 2 B y u i o qProduct ID 025 !0 uLead Wire Type Product ID NXF NTC Thermistors Sensor Thermo String Type wIndividual Specifications Code Lead Wire Type A ø0.3 Copper Lead Wire with Polyurethane Coat iShape of the Lead Wire Kink Code Individual Specifications Code Shape of the Lead Wire Kink T Commercial Type 1 The Twist of Lead Wire Type 2 Standard Type eChip Dimensions Code Dimensions (LxT) EIA 15 1.00 x 0.50mm 0402 oPackaging Code Packaging B Bulk rTemperature Characteristics !0Dimensions (Full Length) Code Temperature Characteristics XH Nominal B-Constant 3350–3399K Code Dimensions (Full Length) WB Nominal B-Constant 4050–4099K 025 25mm WF Nominal B-Constant 4250–4299K 030 30mm 040 40mm 050 50mm 060 60mm 070 70mm 080 80mm tResistance Expressed by three figures. The unit is (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Ex. Code Resistance 103 10kΩ 473 47kΩ 104 100kΩ yResistance Tolerance Code Resistance Tolerance F ±1% 090 90mm 100 100mm 110 110mm 120 120mm 130 130mm 140 140mm 150 150mm 3 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 NTC Thermistor for Temperature Sensor/Lead Type (Part Number) NXR T 15 XH 103 q w e r t F A 1 qProduct ID NXR NTC Thermistor Sensor/Lead Type wIndividual Specifications Code Individual Specifications T Commercial Type eChip Dimensions Code Dimensions (LxT) 15 1.00 x 0.50mm rTemperature Characteristics Code Temperature Characteristics WB Nominal B-Constant 4050–4099K WF Nominal B-Constant 4250–4299K !0 Code Resistance Tolerance F ±1% E ±3% J ±5% uLead Wire Type Code Lead Wire Type A ø0.4 Copper-clad Fe Wire, Tinned iShape of the Lead Wire Code Shape of the Lead Wire 1 Lead Spacing 2.5mm 3 Lead Spacing 5.0mm oPackaging XH Nominal B-Constant 3350–3399K Code Packaging XM Nominal B-Constant 3500-3549K A Ammo Pack Taping XV Nominal B-Constant 3900-3949K B Bulk tResistance !0Dimensions (Full Length) Expressed by three figures. The unit is (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. 4 040 yResistance Tolerance Product ID Ex. B y u i o Code Resistance 103 10kΩ 473 47kΩ 104 100kΩ Code Dimensions (Full Length) 010 10mm 020 20mm 030 30mm 040 40mm 016 16mm (Lead distance between reference and bottom planes) R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 NTC Thermistors for Inrush Current Suppression Lead Type (Part Number) NT PA7 160 L BM B0 q w e r t y qProduct ID rResistance Tolerance Product ID NT NTC Thermistors wSeries Code Resistance Tolerance L ±15% tIndividual Specifications Code Series Nominal Body Diameter ø7mm PA7 PA9 Inrush Current Suppression Lead Type PAA PAD A lead structure and other specifications are expressed by two-digit alphanumerics. ø9mm Code Individual Specifications Body Diameter ø10mm B1 Standard Type (Ammo Pack) ø7mm, ø9mm BM Standard Type (Bulk) ø7mm, ø9mm ø13mm PAJ ø18mm D6 PAN ø22mm DK Standard (Bulk) ø18mm, ø22mm DN Standard (Bulk) ø10mm, ø13mm Standard Type (Ammo Pack) ø10mm, ø13mm eResistance Expressed by three-digit alphanumerics. The unit is ohm (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R." In this case, all figures are significant digits. Ex. Code yPackaging Code Packaging A0 Ammo Pack Taping B0 Bulk Resistance 3R0 3Ω 100 10Ω 5 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 Basic Characteristics !Basic Characteristics 2. B-Constant as (1) formula B=Rn (R/R0) / (1/T-1/T0) Resistance vs. Temperature 102 Resistance vs. Temperature Characteristics, R/R25 1. Zero-power Resistance of Thermistor: R R=R0 expB (1/T-1/T0) ..............(1) R: Resistance in ambient temperature T (K) (K: absolute temperature) R0: Resistance in ambient temperature T0 (K) B: B-Constant of Thermistor ............(2) 3. Thermal Dissipation Constant When electric power P (mW) is spent in ambient temperature T1 and thermistor temperature rises T2, there is a formula as follows P=C (T2-T1) ..................(3) C: Thermal dissipation constant (mW/°C) Thermal dissipation constant is varied with dimensions, measurement conditions, etc. 4. Thermal Time Constant Period in which Thermistor's temperature will change 63.2% of its temperature difference from ambient temperature T0 (°C) to T1 (°C). 101 1 10–1 B=3450 B=3900 B=4100 10–2 –20 0 20 40 60 80 100 120 Temperature (°C) Thermal Time Constant T1 Temperature X 63.2% T0 Time !Performance Item Resistance Condition Measured by zero-power in specified ambient temperature. Calculated between two specified ambient temperatures by next formula. T and T0 is absolute temperature (K). B-Constant B= Thermal Dissipation Constant Rn (R/R0) 1/TY1/T0 Shows necessary electric power that Thermistor's temperature rises 1°C by self heating. It is calculated by next formula (mW/°C). C= P TYT0 Rated Electric Power Shows the required electric power that causes Thermistor's temperature to rise to a specified temperature by self heating, at ambient temperature of 25 °C. Permissive Operating Current It is possible to keep Thermistor's temperature rising max. 1°C. Please inquire about test conditions and ratings. 6 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 NTC Thermistors 1 Temperature Sensor and Compensation 0201 (0603) Size 0.30±0.03 Chip NTC Thermistors have Ni barrier termination and provide excellent solderability and offer high stability in environment by unique inner construction. 0.15±0.05 c Features 0.15±0.05 0.60±0.03 0.30±0.03 1. Excellent solderability and high stability in environment 2. Excellent long time aging stability 3. High accuracy in resistance and B-Constant 4. Reflow soldering possible 5. NCP series are recognized by UL/cUL. (UL1434, File No.E137188) Electrode (Ag System + Ni Plating + Sn Plating) (in mm) c Applications 1. Temperature compensation for transistor, IC and crystal oscillator in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Part Number Resistance B-Constant B-Constant B-Constant B-Constant Permissive Operating Rated Electric Typical Dissipation (25°C) (25-50°C) (25-80°C) (25-85°C) (25-100°C) Current (25°C) Power (25°C) Constant (25°C) (ohm) (K) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/°C) NCP03XM102p05RL 1.0k 3500 ±1% 3539 3545 3560 1.00 100 1 NCP03XM152p05RL 1.5k 3500 ±1% 3539 3545 3560 0.81 100 1 NCP03XM222p05RL 2.2k 3500 ±1% 3539 3545 3560 0.67 100 1 NCP03XM332p05RL 3.3k 3500 ±1% 3539 3545 3560 0.55 100 1 NCP03XM472p05RL 4.7k 3500 ±1% 3539 3545 3560 0.46 100 1 1 NCP03XH682p05RL 6.8k 3380 ±1% 3428 3434 3455 0.38 100 NCP03XH103F05RL 10k ±1% 3380 ±1% 3428 3434 3455 0.31 100 1 NCP03XH103p05RL 10k 3380 ±1% 3428 3434 3455 0.31 100 1 NCP03XV103p05RL 10k 3900 ±1% 3930 3934 3944 0.31 100 1 NCP03XH153p05RL 15k 3380 ±1% 3428 3434 3455 0.25 100 1 NCP03XH223p05RL 22k 3380 ±1% 3428 3434 3455 0.21 100 1 NCP03WF333p05RL 33k 4250 ±1% 4303 4311 4334 0.17 100 1 NCP03WB473p05RL 47k 4050 ±3% 4101 4108 4131 0.14 100 1 NCP03WL473p05RL 47k 4485 ±1% 4537 4543 4557 0.14 100 1 NCP03WF683p05RL 68k 4250 ±1% 4303 4311 4334 0.12 100 1 NCP03WL683p05RL 68k 4485 ±1% 4537 4543 4557 0.12 100 1 NCP03WF104F05RL 100k ±1% 4250 ±1% 4303 4311 4334 0.10 100 1 NCP03WF104p05RL 100k 4250 ±1% 4303 4311 4334 0.10 100 1 NCP03WL104p05RL 100k 4485 ±1% 4537 4543 4557 0.10 100 1 NCP03WL154p05RL 150k 4485 ±1% 4537 4543 4557 0.08 100 1 NCP03WL224p05RL 220k 4485 ±1% 4537 4543 4557 0.06 100 1 p is filled with resistance tolerance codes (E: ±3%, J: ±5%). Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 125°C by self heating, at ambient temperature of 25 °C. Operating Temperature Range: -40°C to +125°C 7 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 NTC Thermistors Temperature Sensor and Compensation 0402 (1005) Size 0.5±0.05 Chip NTC Thermistor have Ni barrier termination and provide excellent solderability and offer high stability in environment by unique inner construction. 0.25±0.10 c Features 0.25±0.10 1.0±0.05 1. Excellent solderability and high stability in environment 2. Excellent long time aging stability 3. High accuracy in resistance and B-Constant 4. Reflow soldering possible 5. Same B-constant in the same resistance in the three sizes (0805 size / 0603 size / 0402 size) Easy to use smaller size in the circuits 6. NCP series are recognized by UL/cUL. (UL1434, File No.E137188) 0.5±0.05 2 Electrode (Ag System + Ni Plating + Sn Plating) (in mm) c Applications 1. Temperature compensation for transistor, IC and crystal oscillator in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Part Number Resistance B-Constant B-Constant B-Constant B-Constant (25°C) (25-50°C) (25-80°C) (25-85°C) (25-100°C) (ohm) (K) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) Permissive Operating Rated Electric Typical Dissipation Current (25°C) Power (25°C) Constant (25°C) (mA) (mW) (mW/°C) NCP15XC220p03RC 22 3100 ±3% 3126 3128 3136 6.70 100 1 NCP15XC330p03RC 33 3100 ±3% 3126 3128 3136 5.50 100 1 NCP15XC470p03RC 47 3100 ±3% 3126 3128 3136 4.60 100 1 NCP15XC680p03RC 68 3100 ±3% 3126 3128 3136 3.80 100 1 NCP15XF101p03RC 100 3250 ±3% 3282 3284 3296 3.10 100 1 NCP15XF151p03RC 150 3250 ±3% 3282 3284 3296 2.50 100 1 NCP15XM221p03RC 220 3500 ±3% 3539 3545 3560 2.10 100 1 NCP15XM331p03RC 330 3500 ±3% 3539 3545 3560 1.70 100 1 NCP15XQ471p03RC 470 3650 ±2% 3688 3693 3706 1.40 100 1 NCP15XQ681p03RC 680 3650 ±3% 3688 3693 3706 1.20 100 1 NCP15XQ102p03RC 1.0k 3650 ±2% 3688 3693 3706 1.00 100 1 NCP15XW152p03RC 1.5k 3950 ±3% 3982 3987 3998 0.81 100 1 NCP15XW222p03RC 2.2k 3950 ±3% 3982 3987 3998 0.67 100 1 NCP15XW332p03RC 3.3k 3950 ±3% 3982 3987 3998 0.55 100 1 NCP15XM472p03RC 4.7k 3500 ±2% 3539 3545 3560 0.46 100 1 NCP15XW472p03RC 4.7k 3950 ±3% 3982 3987 3998 0.46 100 1 NCP15XW682p03RC 6.8k 3950 ±3% 3982 3987 3998 0.38 100 1 3428 3434 3455 0.31 100 1 NCP15XH103D03RC 10k ±0.5% 3380 ±0.7% NCP15XH103F03RC 10k ±1% 3380 ±1% 3428 3434 3455 0.31 100 1 NCP15XH103p03RC 10k 3380 ±1% 3428 3434 3455 0.31 100 1 NCP15XV103p03RC 10k 3900 ±3% 3930 3934 3944 0.31 100 1 NCP15XW153p03RC 15k 3950 ±3% 3982 3987 3998 0.25 100 1 NCP15XW223p03RC 22k 3950 ±3% 3982 3987 3998 0.21 100 1 NCP15WL223p03RC 22k 4485 ±1% 4537 4543 4557 0.21 100 1 NCP15WB333p03RC 33k 4050 ±3% 4101 4108 4131 0.17 100 1 NCP15WL333p03RC 33k 4485 ±1% 4537 4543 4557 0.17 100 1 Continued on the following page. 8 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 Continued from the preceding page. Part Number NCP15WB473D03RC Resistance B-Constant B-Constant B-Constant B-Constant (25°C) (25-50°C) (25-80°C) (25-85°C) (25-100°C) (ohm) (K) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) 4101 4108 4131 0.14 100 1 NCP15WB473F03RC 47k ±1% 4050 ±1% 4101 4108 4131 0.14 100 1 NCP15WB473p03RC 47k 4050 ±1% 4101 4108 4131 0.14 100 1 NCP15WL473p03RC 47k 4485 ±1% 4537 4543 4557 0.14 100 1 NCP15WD683p03RC 68k 4150 ±3% 4201 4209 4232 0.12 100 1 NCP15WL683p03RC 68k 4485 ±1% 4537 4543 4557 0.12 100 1 4303 4311 4334 0.10 100 1 NCP15WF104D03RC 47k ±0.5% 4050 ±0.5% Permissive Operating Rated Electric Typical Dissipation Current (25°C) Power (25°C) Constant (25°C) (mA) (mW) (mW/°C) 100k ±0.5% 4250 ±0.5% NCP15WF104F03RC 100k ±1% 4250 ±1% 4303 4311 4334 0.10 100 1 NCP15WF104p03RC 100k 4250 ±1% 4303 4311 4334 0.10 100 1 NCP15WL104p03RC 100k 4485 ±1% 4537 4543 4557 0.10 100 1 NCP15WL154p03RC 150k 4485 ±1% 4537 4543 4557 0.08 100 1 NCP15WM154p03RC 150k 4500 ±3% 4571 4582 4614 0.08 100 1 NCP15WM224p03RC 220k 4500 ±3% 4571 4582 4614 0.06 100 1 NCP15WM474p03RC 470k 4500 ±3% 4571 4582 4614 0.04 100 1 2 p is filled with resistance tolerance codes (E: ±3%, J: ±5%). Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 125°C by self heating, at ambient temperature of 25 °C. Operating Temperature Range: -40°C to +125°C 9 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 NTC Thermistors Temperature Sensor and Compensation 0603 (1608) Size 0.8±0.15 Chip NTC Thermistors have Ni barrier termination and provide excellent solderability and offer high stability in environment by unique inner construction. 0.2-0.6 c Features 1. Excellent solderability and high stability in environment 2. Excellent long time aging stability 3. High accuracy in resistance and B-constant 4. Flow / Reflow soldering possible 5. Same B-Constant in the same resistance in the three sizes (0805 size / 0603 size / 0402 size) Easy to use smaller size in the circuits 6. NCP series are recognized by UL/cUL. (UL1434, File No.E137188) 0.8±0.15 3 0.2-0.6 1.6±0.15 Electrode (Ag System + Ni Plating + Sn Plating) (in mm) c Applications 1. Temperature compensation for transistor, IC and crystal oscillator in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Part Number Resistance B-Constant B-Constant B-Constant B-Constant (25°C) (25-50°C) (25-80°C) (25-85°C) (25-100°C) (ohm) (K) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) Permissive Operating Rated Electric Typical Dissipation Current (25°C) Power (25°C) Constant (25°C) (mA) (mW) (mW/°C) NCP18XF101p03RB 100 3250 ±3% 3282 3284 3296 3.10 100 1 NCP18XF151p03RB 150 3250 ±3% 3282 3284 3296 2.50 100 1 NCP18XM221p03RB 220 3500 ±3% 3539 3545 3560 2.10 100 1 NCP18XM331p03RB 330 3500 ±3% 3539 3545 3560 1.70 100 1 NCP18XQ471p03RB 470 3650 ±2% 3688 3693 3706 1.40 100 1 NCP18XQ681p03RB 680 3650 ±3% 3688 3693 3706 1.20 100 1 NCP18XQ102p03RB 1.0k 3650 ±2% 3688 3693 3706 1.00 100 1 NCP18XW152p03RB 1.5k 3950 ±3% 3982 3987 3998 0.81 100 1 NCP18XW222p03RB 2.2k 3950 ±3% 3982 3987 3998 0.67 100 1 NCP18XW332p03RB 3.3k 3950 ±3% 3982 3987 3998 0.55 100 1 NCP18XM472p03RB 4.7k 3500 ±2% 3539 3545 3560 0.46 100 1 NCP18XW472p03RB 4.7k 3950 ±3% 3982 3987 3998 0.46 100 1 NCP18XW682p03RB 6.8k 3950 ±3% 3982 3987 3998 0.38 100 1 NCP18XH103D03RB 3428 3434 3455 0.31 100 1 NCP18XH103F03RB 10k ±1% 3380 ±1% 3428 3434 3455 0.31 100 1 NCP18XH103p03RB 10k 3380 ±1% 3428 3434 3455 0.31 100 1 NCP18XV103p03RB 10k 3900 ±3% 3930 3934 3944 0.31 100 1 NCP18XW153p03RB 15k 3950 ±3% 3982 3987 3998 0.25 100 1 NCP18XW223p03RB 22k 3950 ±3% 3982 3987 3998 0.21 100 1 NCP18WB333p03RB 33k 4050 ±3% 4101 4108 4131 0.17 100 1 4101 4108 4131 0.14 100 1 NCP18WB473D03RB 10k ±0.5% 3380 ±0.7% 47k ±0.5% 4030 ±0.5% NCP18WB473F10RB 47k ±1% 4050 ±1.5% 4101 4108 4131 0.14 100 1 NCP18WB473p03RB 47k 4050 ±2% 4101 4108 4131 0.14 100 1 NCP18WD683p03RB 68k 4150 ±3% 4201 4209 4232 0.12 100 1 4255 4260 4282 0.10 100 1 4255 4260 4282 0.10 100 1 NCP18WF104D03RB NCP18WF104F12RB 100k ±0.5% 4200 ±0.5% 100k ±1% 4200 ±1% Continued on the following page. 10 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 Continued from the preceding page. Part Number Resistance B-Constant B-Constant B-Constant B-Constant (25°C) (25-50°C) (25-80°C) (25-85°C) (25-100°C) (ohm) (K) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) Permissive Operating Rated Electric Typical Dissipation Current (25°C) Power (25°C) Constant (25°C) (mA) (mW) (mW/°C) NCP18WF104p03RB 100k 4250 ±2% 4303 4311 4334 0.10 100 1 NCP18WM154p03RB 150k 4500 ±3% 4571 4582 4614 0.08 100 1 NCP18WM224p03RB 220k 4500 ±3% 4571 4582 4614 0.06 100 1 NCP18WM474p03RB 470k 4500 ±3% 4571 4582 4614 0.04 100 1 p is filled with resistance tolerance codes (E: ±3%, J: ±5%). Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 125°C by self heating, at ambient temperature of 25 °C. Operating Temperature Range: -40°C to +125°C 3 11 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 NTC Thermistors 1.25±0.2 Temperature Sensor and Compensation 0805 (2012) Size Chip NTC Thermistors have Ni barrier termination and provide excellent solderability and offer high stability in environment by unique inner construction. 0.2-0.7 c Features 4 0.2-0.7 2.0±0.2 0.85±0.15 1. Excellent solderability and high stability in environment 2. Excellent long time aging stability 3. High accuracy in resistance and B-constant 4. Flow / Reflow soldering possible 5. Same B-Constant in the same resistance in the three sizes (0805 size / 0603 size / 0402 size) Easy to use smaller size in the circuits 6. NCP series are recognized by UL/cUL. (UL1434, File No.E137188) Electrode (Ag System + Ni Plating + Sn Plating) (in mm) c Applications 1. Temperature compensation for transistor, IC and crystal oscillator in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Part Number Resistance B-Constant B-Constant B-Constant B-Constant Permissive Operating Rated Electric Typical Dissipation (25°C) (25-50°C) (25-80°C) (25-85°C) (25-100°C) Current (25°C) Power (25°C) Constant (25°C) (ohm) (K) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/°C) NCP21XM221J03RA 220 ±5% 3500 ±3% 3539 3545 3560 3.00 200 2 NCP21XQ471J03RA 470 ±5% 3650 ±3% 3688 3693 3706 2.00 200 2 NCP21XQ102J03RA 1.0k ±5% 3650 ±3% 3688 3693 3706 1.40 200 2 NCP21XW222J03RA 2.2k ±5% 3950 ±3% 3982 3987 3998 0.90 200 2 NCP21XM472J03RA 4.7k ±5% 3500 ±3% 3539 3545 3560 0.65 200 2 NCP21XV103J03RA 10k ±5% 3900 ±3% 3930 3934 3944 0.44 200 2 NCP21XW153J03RA 15k ±5% 3950 ±3% 3982 3987 3998 0.36 200 2 NCP21XW223J03RA 22k ±5% 3950 ±3% 3982 3987 3998 0.30 200 2 NCP21WB333J03RA 33k ±5% 4050 ±3% 4101 4108 4131 0.24 200 2 NCP21WB473J03RA 47k ±5% 4050 ±3% 4101 4108 4131 0.20 200 2 NCP21WF104J03RA 100k ±5% 4250 ±3% 4303 4311 4334 0.14 200 2 Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 125°C by self heating, at ambient temperature of 25 °C. Operating Temperature Range: -40°C to +125°C 12 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Dec.17,2012 Temperature Sensor and Compensation Chip Type Standard Land Pattern Dimensions c Chip b Part Number NCP03 NCP15 NCP18 NCP21 Solder Resist Land a Dimensions (mm) Soldering Methods Chip (LxW) a b Reflow Soldering 0.6x0.3 0.25 0.3 Reflow Soldering 1.0x0.5 0.4 0.4-0.5 Flow Soldering 0.6-1.0 0.8-0.9 1.6x0.8 Reflow Soldering 0.6-0.8 0.6-0.7 Flow Soldering 1.0-1.1 0.9-1.0 2.0x1.25 Reflow Soldering 1.0-1.1 0.6-0.7 c 0.3 0.5 0.6-0.8 0.6-0.8 1.0-1.2 1.0-1.2 13 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value) NCPppXC680 68Ω 3100K Resistance (Ω) 1099.815 846.832 658.372 516.007 407.991 325.529 261.707 212.123 173.033 141.747 116.894 97.042 81.016 68.000 57.368 48.636 41.426 35.428 30.421 26.235 22.712 19.778 17.293 15.134 13.288 11.729 10.386 9.220 8.208 7.317 6.539 5.874 5.291 4.768 Part Number NCPppXC220 22Ω Resistance 3100K B-Constant Temp. ( C) Resistance (Ω) Y40 355.823 Y35 273.975 Y30 213.003 Y25 166.943 Y20 131.997 Y15 105.318 Y10 84.670 Y5 68.628 0 55.981 5 45.859 10 37.819 15 31.396 20 26.211 25 22.000 30 18.560 35 15.735 40 13.403 45 11.462 50 9.842 55 8.488 60 7.348 65 6.399 70 5.595 75 4.896 80 4.299 85 3.795 90 3.360 95 2.983 100 2.656 105 2.367 110 2.116 115 1.901 120 1.712 125 1.543 NCPppXC330 33Ω 3100K Resistance (Ω) 533.734 410.962 319.504 250.415 197.996 157.978 127.005 102.942 83.972 68.789 56.728 47.094 39.317 33.000 27.840 23.603 20.104 17.193 14.763 12.732 11.022 9.598 8.392 7.345 6.448 5.692 5.040 4.474 3.983 3.551 3.173 2.851 2.568 2.314 Part Number NCPppXQ471 470Ω Resistance 3650K B-Constant Temp. (°C) Resistance (Ω) Y40 11822.473 Y35 8767.745 Y30 6570.224 Y25 4971.784 Y20 3796.933 Y15 2923.400 Y10 2269.599 Y5 1775.225 0 1399.050 5 1110.220 10 887.257 15 713.463 20 577.375 25 470.000 30 384.800 35 316.757 40 262.177 45 218.069 50 182.297 55 153.150 60 129.249 65 109.551 70 93.281 75 79.750 80 68.446 85 58.996 90 51.036 95 44.332 100 38.640 105 33.790 110 29.664 115 26.123 120 23.091 125 20.472 NCPppXQ681 NCPppXM102 NCPppXQ102 NCPppXM152 NCPppXW152 NCPppXM222 NCPppXW222 680Ω 1.5kΩ 1.5kΩ 2.2kΩ 1.0kΩ 2.2kΩ 1.0kΩ 3650K 3500K 3500K 3650K 3950K 3950K 3500K Resistance (Ω) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) 46.786 17104.854 75.961 25.154 51.791 21.266 31.899 35.530 12685.248 54.520 18.655 37.172 16.150 24.225 27.162 9505.855 39.607 13.979 27.005 12.347 18.520 20.907 7193.219 29.103 10.578 19.843 9.503 14.255 16.203 5493.436 21.601 8.079 14.728 7.365 11.047 12.644 4229.599 16.198 6.220 11.044 5.747 8.621 9.934 3283.675 12.264 4.829 8.362 4.516 6.773 7.858 2568.411 9.370 3.777 6.389 3.572 5.358 6.257 2024.158 7.219 2.977 4.922 2.844 4.266 5.015 1606.275 5.609 2.362 3.825 2.280 3.419 4.045 1283.691 4.391 1.888 2.994 1.839 2.758 2.238 3.283 1032.245 3.463 1.518 2.361 1.492 1.827 2.680 835.351 2.751 1.229 1.876 1.218 1.500 2.200 680.000 2.200 1.000 1.500 1.000 1.238 1.816 556.733 1.771 0.819 1.207 0.825 1.027 1.507 458.287 1.434 0.674 0.978 0.685 0.857 1.257 379.320 1.169 0.558 0.797 0.571 0.718 1.053 315.504 0.958 0.464 0.653 0.479 0.605 0.887 263.749 0.789 0.388 0.538 0.403 0.512 0.751 221.579 0.654 0.326 0.446 0.341 0.435 0.638 186.998 0.545 0.275 0.371 0.290 0.371 0.544 158.499 0.456 0.233 0.311 0.247 0.318 0.466 134.960 0.383 0.199 0.261 0.212 0.274 0.401 115.383 0.324 0.170 0.221 0.182 0.236 0.346 99.029 0.275 0.146 0.187 0.157 0.205 0.300 85.356 0.234 0.126 0.160 0.136 0.178 0.261 73.839 0.200 0.109 0.137 0.119 0.155 0.228 64.140 0.172 0.094 0.117 0.104 0.136 0.200 55.905 0.149 0.082 0.101 0.091 0.120 0.175 48.888 0.129 0.072 0.088 0.080 0.105 0.155 42.918 0.112 0.063 0.076 0.070 0.093 0.137 37.795 0.098 0.056 0.067 0.062 0.083 0.121 33.409 0.085 0.049 0.058 0.055 0.074 0.108 29.618 0.075 0.044 0.051 0.049 NCPppXC470 47Ω 3100K Resistance (Ω) 760.166 585.310 455.051 356.652 281.994 224.998 180.886 146.614 119.596 97.972 80.794 67.073 55.997 47.000 39.651 33.616 28.633 24.487 21.026 18.133 15.698 13.670 11.952 10.461 9.184 8.107 7.179 6.373 5.673 5.057 4.520 4.060 3.657 3.296 NCPppXF101 100Ω 3250K Resistance (Ω) 1824.175 1390.685 1070.653 831.138 650.960 514.441 409.700 328.877 265.759 215.785 176.395 145.161 120.152 100.000 83.669 70.361 59.456 50.470 43.029 36.830 31.649 27.364 23.756 20.651 18.011 15.800 13.908 12.263 10.844 9.622 8.563 7.648 6.850 6.162 NCPppXF151 150Ω 3250K Resistance (Ω) 2736.262 2086.028 1605.979 1246.708 976.440 771.661 614.550 493.315 398.639 323.677 264.592 217.742 180.228 150.000 125.503 105.541 89.184 75.705 64.543 55.246 47.473 41.045 35.634 30.976 27.016 23.700 20.862 18.394 16.265 14.434 12.844 11.472 10.275 9.243 NCPppXM221 NCPppXM331 220Ω 330Ω 3500K 3500K Resistance (Ω) Resistance (Ω) 4947.904 7421.856 3703.755 5555.632 2798.873 4198.309 2135.887 3203.831 1645.037 2467.555 1278.034 1917.051 1000.620 1500.930 789.612 1184.418 627.752 941.628 502.474 753.711 405.010 607.514 328.480 492.720 268.044 402.066 220.000 330.000 181.576 272.365 150.668 226.002 125.681 188.521 105.336 158.004 88.717 133.076 75.059 112.588 63.777 95.666 54.415 81.622 46.631 69.946 40.115 60.172 34.637 51.955 30.013 45.019 26.110 39.165 22.790 34.186 19.957 29.935 17.541 26.312 15.453 23.180 13.663 20.494 12.114 18.171 10.778 16.168 Detailed Resistance - Temperature Tables are downloadable from the following URL. http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en Continued on the following page. 14 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value) Continued from the preceding page. Part Number NCPppXM332 NCPppXW332 NCPppXM472 NCPppXW472 NCPppXH682 NCPppXW682 NCPppXH103D NCPppXH103 3.3kΩ 3.3kΩ Resistance 4.7kΩ 4.7kΩ 6.8kΩ 6.8kΩ 10kΩ 10kΩ±0.5% 3950K 3500K B-Constant 3500K 3380K 3950K 3380K 3950K 3380K Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Y40 70.179 113.941 105.705 133.043 234.787 195.652 162.279 197.390 Y35 53.295 81.779 79.126 100.756 168.515 148.171 116.474 149.390 Y30 40.743 59.411 59.794 77.076 122.422 113.347 84.615 114.340 Y25 31.360 43.654 45.630 59.540 89.953 87.559 62.173 88.381 Y20 24.304 32.401 35.144 46.401 66.766 68.237 46.147 68.915 Y15 18.966 24.297 27.303 36.482 50.066 53.650 34.604 54.166 Y10 14.901 18.396 21.377 28.904 37.906 42.506 26.200 42.889 Y5 11.787 14.055 16.869 23.047 28.963 33.892 20.018 34.196 0 9.386 10.829 13.411 18.509 22.313 27.219 15.423 27.445 5 7.523 8.414 10.735 14.974 17.338 22.021 11.984 22.165 10 6.067 6.586 8.653 12.189 13.571 17.926 9.380 18.010 15 4.924 5.195 7.018 9.978 10.705 14.674 7.399 14.720 20 4.019 4.126 5.726 8.215 8.503 12.081 5.877 12.099 25 3.300 3.300 4.700 6.800 6.800 10.000 4.700 10.000 30 2.724 2.656 3.879 5.654 5.474 8.315 3.783 8.309 35 2.260 2.152 3.219 4.725 4.434 6.948 3.064 6.939 40 1.885 1.753 2.685 3.967 3.613 5.834 2.497 5.824 45 1.580 1.437 2.250 3.344 2.961 4.917 2.046 4.911 50 1.331 1.184 1.895 2.829 2.440 4.161 1.686 4.160 55 1.126 0.981 1.604 2.404 2.022 3.535 1.397 3.539 60 0.957 0.817 1.363 2.050 1.683 3.014 1.164 3.024 65 0.816 0.684 1.163 1.759 1.409 2.586 0.974 2.593 70 0.700 0.575 0.996 1.515 1.185 2.228 0.819 2.233 75 0.602 0.486 0.857 1.309 1.001 1.925 0.692 1.929 80 0.520 0.412 0.740 1.135 0.849 1.669 0.587 1.673 85 0.450 0.351 0.641 0.988 0.724 1.452 0.500 1.455 90 0.392 0.301 0.558 0.862 0.620 1.268 0.428 1.270 95 0.342 0.258 0.487 0.755 0.532 1.110 0.368 1.112 100 0.299 0.223 0.426 0.662 0.459 0.974 0.318 0.976 105 0.263 0.193 0.375 0.583 0.398 0.858 0.275 0.860 110 0.232 0.168 0.330 0.515 0.346 0.758 0.239 0.759 115 0.205 0.146 0.292 0.457 0.302 0.672 0.208 0.673 120 0.182 0.128 0.259 0.406 0.264 0.596 0.182 0.598 125 0.162 0.113 0.230 0.361 0.232 0.531 0.160 0.532 Part Number NCPppXV103 NCPppXH153 NCPppXW153 NCPppXH223 NCPppXW223 NCPppWL223 NCPppWB333 NCPppWF333 10kΩ 15kΩ Resistance 22kΩ 33kΩ 33kΩ 22kΩ 22kΩ 15kΩ 3900K 3380K 3950K B-Constant 4485K 4050K 4250K 3380K 3950K Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Y40 1451.049 328.996 430.434 293.478 517.912 759.605 1073.436 1227.263 Y35 1019.238 237.387 325.976 222.256 371.724 545.196 753.900 874.449 Y30 725.084 173.185 249.364 170.021 270.048 396.070 535.073 630.851 Y25 522.021 127.773 192.629 131.338 198.426 291.025 383.590 460.457 Y20 379.842 95.327 150.121 102.355 147.278 216.008 277.643 339.797 Y15 279.371 71.746 118.029 80.474 110.439 161.977 202.813 253.363 Y10 207.566 54.564 93.514 63.759 83.617 122.638 149.462 190.766 Y5 155.639 41.813 74.563 50.838 63.888 93.702 111.082 144.964 0 117.814 32.330 59.881 40.828 49.221 72.191 83.233 111.087 5 89.925 25.194 48.446 33.032 38.245 56.093 62.858 85.842 66.861 10 69.204 19.785 39.436 26.888 29.936 43.907 47.831 52.470 15 53.675 15.651 32.282 22.010 23.613 34.633 36.664 41.471 20 41.937 12.468 26.577 18.121 18.756 27.509 28.304 33.000 25 33.000 10.000 22.000 15.000 15.000 22.000 22.000 26.430 30 26.143 8.072 18.292 12.472 12.074 17.709 17.214 21.298 35 20.845 6.556 15.285 10.422 9.780 14.344 13.557 17.266 40 16.723 5.356 12.834 7.969 8.751 11.688 10.744 14.076 45 13.498 4.401 10.817 6.531 7.375 9.578 8.566 11.538 50 10.954 3.635 9.154 5.382 6.241 7.894 6.871 9.506 55 8.940 3.019 7.777 4.459 5.302 6.540 5.544 7.870 60 7.334 2.521 6.631 3.713 4.521 5.446 4.498 6.549 65 6.046 2.115 5.690 3.108 3.879 4.559 3.669 5.475 70 5.011 1.781 4.901 2.613 3.341 3.832 3.009 4.595 75 4.170 1.509 4.234 2.208 2.887 3.239 2.479 3.874 80 3.487 1.284 3.671 1.873 2.503 2.748 2.052 3.282 85 2.928 1.097 3.195 1.597 2.178 2.342 1.707 2.789 90 2.469 0.941 2.790 1.367 1.902 2.004 1.426 2.379 95 2.091 0.810 2.441 1.174 1.664 1.722 1.196 2.038 100 1.777 0.701 2.142 1.013 1.461 1.486 1.008 1.751 105 1.516 0.608 1.888 0.878 1.287 1.287 0.852 1.509 110 1.298 0.530 1.668 0.763 1.137 1.119 0.724 1.306 115 1.116 0.463 1.477 0.665 1.007 0.975 0.617 1.134 120 0.962 0.406 1.312 0.582 0.895 0.854 0.528 0.987 125 0.832 0.358 1.169 0.511 0.797 0.750 0.454 Detailed Resistance - Temperature Tables are downloadable from the following URL. http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en Continued on the following page. 15 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value) Continued from the preceding page. Part Number NCPppWL333 NCP15WB473D NCP18WB473D NCPppWB473 NCPppWL473 NCPppWD683 NCPppWF683 NCPppWL683 Resistance 47kΩ 33kΩ 47kΩ 47kΩ 68kΩ 68kΩ 68kΩ 47kΩ B-Constant 4050K 4485K 4050K 4030K 4250K 4485K 4150K 4485K Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Y40 1610.154 1743.085 1690.586 1747.920 2990.041 3317.893 2735.359 2293.249 Y35 1130.850 1241.814 1215.318 1245.428 2100.247 2330.237 1937.391 1610.605 Y30 802.609 896.201 898.485 882.908 1494.113 1653.862 1389.345 1143.110 Y25 575.385 654.460 647.911 655.802 1075.679 1185.641 1008.014 819.487 Y20 416.464 483.172 480.069 483.954 782.705 858.168 738.978 593.146 Y15 304.219 360.367 359.009 360.850 575.674 626.875 547.456 433.281 Y10 224.193 271.363 270.868 271.697 427.712 461.974 409.600 319.305 Y5 166.623 206.204 206.463 206.113 320.710 343.345 309.217 237.312 0 124.850 158.051 158.126 158.214 242.768 257.266 235.606 177.816 5 94.287 122.145 122.259 122.267 185.300 194.287 180.980 134.287 10 71.747 95.145 95.256 95.227 142.603 147.841 140.139 102.184 15 54.996 74.676 74.754 74.730 110.602 113.325 109.344 78.327 20 42.455 59.038 59.075 59.065 86.415 87.484 85.929 60.467 25 33.000 47.000 47.000 47.000 68.000 68.000 68.000 47.000 30 25.822 37.667 37.643 37.636 53.871 53.208 54.167 36.776 35 20.335 30.381 30.326 30.334 42.954 41.903 43.421 28.962 40 16.115 24.654 24.583 24.591 34.460 33.208 35.016 22.952 45 12.849 20.124 20.043 20.048 27.814 26.477 28.406 18.301 50 10.306 16.518 16.433 16.433 22.572 21.237 23.166 14.679 55 8.317 13.631 13.545 13.539 18.422 17.137 18.997 11.845 60 6.748 11.306 11.209 11.223 15.113 13.904 15.657 9.610 65 5.504 9.424 9.345 9.328 12.459 11.342 12.967 7.839 70 4.513 7.892 7.818 7.798 10.325 9.299 10.794 6.427 75 3.718 6.639 6.544 6.571 8.592 7.662 9.021 5.296 80 3.078 5.609 5.518 5.548 7.185 6.343 7.575 4.384 85 2.560 4.759 4.704 4.674 6.033 5.276 6.387 3.646 90 2.139 4.054 4.004 3.972 5.087 4.407 5.407 3.046 95 1.794 3.468 3.422 3.388 4.309 3.697 4.598 2.555 100 1.511 2.977 2.936 2.902 3.661 3.114 3.922 2.152 105 1.278 2.566 2.528 2.494 3.124 2.634 3.359 1.820 110 1.085 2.220 2.184 2.150 2.675 2.236 2.887 1.546 115 0.925 1.927 1.893 1.860 2.299 1.907 2.489 1.318 120 0.792 1.679 1.646 1.615 1.983 1.632 2.155 1.128 125 0.681 1.468 1.436 1.406 1.715 1.403 1.870 0.970 Part Number NCP15WF104D NCP18WF104D/F NCPppWF104 NCPppWL104 NCPppWL154 NCPppWM154 NCPppWL224 NCPppWM224 Resistance 100kΩ±1% 150kΩ 150kΩ 100kΩ 220kΩ 100kΩ 100kΩ±0.5% 220kΩ B-Constant 4485K 4200K 4500K 4250K 4500K 4485K 4250K 4485K Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) 4205.686 7899.466 4397.119 11585.884 4879.254 4221.283 10734.358 Y40 7318.881 2966.436 5466.118 3088.599 8016.973 3426.818 2995.044 7539.001 Y35 5140.228 2118.789 3834.499 2197.225 5623.931 2432.149 2146.996 5350.729 Y30 3648.224 1531.319 2720.523 1581.881 3990.100 1743.590 1554.599 3835.898 Y25 2615.385 1118.422 1951.216 1151.037 2861.784 1262.012 1136.690 2776.427 Y20 1893.018 1415.565 825.570 846.579 2076.162 921.875 839.019 2028.126 Y15 1382.813 1036.984 615.526 628.988 1520.909 679.373 624.987 1494.620 Y10 1019.059 767.079 463.104 471.632 1125.049 504.919 469.678 1110.822 Y5 757.379 572.667 351.706 357.012 839.912 378.333 355.975 832.332 0 567.499 431.264 269.305 272.500 632.521 285.717 272.011 628.577 5 428.575 327.405 207.891 209.710 480.194 217.414 209.489 478.310 10 326.121 250.538 161.722 162.651 367.455 166.654 162.559 366.639 15 249.981 193.166 126.723 127.080 283.310 128.653 127.057 283.036 20 192.979 150.000 100.000 100.000 220.000 100.000 100.000 220.000 25 150.000 117.281 79.439 79.222 172.012 78.247 79.222 172.143 30 117.370 92.293 63.509 63.167 135.364 61.622 63.167 135.569 35 92.433 73.090 51.084 50.677 107.198 48.835 50.677 107.436 40 73.252 58.240 41.336 40.904 85.419 38.937 40.904 85.662 45 58.406 46.846 46.665 33.628 33.195 68.441 31.231 33.195 68.708 50 37.803 37.605 27.510 27.091 55.153 25.202 27.091 55.444 55 30.671 30.453 22.621 22.224 44.665 20.448 22.224 44.984 60 25.018 24.804 18.692 18.323 36.379 16.679 18.323 36.694 65 20.513 20.293 15.525 15.184 29.763 13.675 15.184 30.085 70 16.902 16.679 12.947 12.635 24.462 11.268 12.635 24.789 75 13.993 13.776 10.849 10.566 20.205 9.329 10.566 20.523 80 11.638 11.428 9.129 8.873 16.761 7.758 8.873 17.068 85 9.721 9.520 7.713 7.481 13.962 6.481 7.481 14.258 90 8.155 7.966 6.546 6.337 11.684 5.437 6.337 11.961 95 6.869 6.688 5.572 5.384 9.809 4.580 5.384 10.075 100 5.810 5.639 4.764 4.594 8.270 3.873 4.594 8.521 105 4.933 4.772 4.087 3.934 6.998 3.289 3.934 7.236 110 4.206 4.052 3.518 3.380 5.942 2.804 3.380 6.169 115 3.601 3.454 3.040 2.916 5.067 2.400 2.916 5.281 120 3.096 2.955 2.634 2.522 4.334 2.064 2.522 4.540 125 Detailed Resistance - Temperature Tables are downloadable from the following URL. http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en Continued on the following page. 16 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Dec.17,2012 Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value) Continued from the preceding page. Part Number NCPppWM474 Resistance 470kΩ B-Constant 4500K Temp. (°C) Resistance (kΩ) Y40 24751.661 Y35 17127.169 Y30 12014.762 Y25 8524.305 Y20 6113.811 Y15 4435.437 Y10 3249.216 Y5 2403.515 0 1794.358 5 1351.294 10 1025.870 15 785.018 20 605.252 25 470.000 30 367.480 35 289.186 40 229.014 45 182.485 50 146.215 55 117.828 60 95.420 65 77.718 70 63.584 75 52.260 80 43.166 85 35.808 90 29.828 95 24.961 100 20.955 105 17.668 110 14.951 115 12.695 120 10.824 125 9.259 Detailed Resistance - Temperature Tables are downloadable from the following URL. http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en 17 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Sensor and Compensation Chip Type !Caution/Notice c !Caution (Storage and Operating Conditions) This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all of these factors can deteriorate the product characteristics or cause failures and burn-out. 1. Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) c !Caution (Others) Be sure to provide an appropriate fail-safe function on your product to prevent secondary damages that may be caused by the abnormal function or the failure of our product. c Notice (Storage and Operating Conditions) To keep solderability of product from declining, the following storage conditions are recommended. 1. Storage condition: Temperature -10 to +40 degrees C Humidity less than 75%RH (not dewing condition) 2. Storage term: Use this product within 6 months after delivery by first-in and first-out stocking system. 3. Storage place: Do not store this product in corrosive gas (Sulfuric acid gas, Chlorine gas, etc.) or in direct sunlight. c Notice (Rating) Use this product within the specified temperature range. Higher temperature may cause deterioration of the characteristics or the material quality of this product. c Notice (Handling) The ceramic of this product is fragile, and care must be taken not to load an excessive press - force or to give a shock at handling. Such forces may cause cracking or chipping. 18 2. Volatile or flammable gas 3. Dusty conditions 4. Under vacuum, or under high or low pressure 5. Wet or humid locations 6. Places with salt water, oils, chemical liquids or organic solvents 7. Strong vibrations 8. Other places where similar hazardous conditions exist R44E.pdf Dec.17,2012 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 Temperature Sensor and Compensation Chip Type !Caution/Notice c Notice (Soldering and Mounting) 1. Mounting Position Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board. Component Direction Locate this product horizontal to the direction in which stress acts. Mounting Close to Board Separation Line C Perforation Holes A B Keep this product on the PC Board away from the Separation Line. Worst ← A-C-B-D → Better D Slit 2. Allowable Soldering Temperature and Time NCP03/15 Series Allowable Reflow Soldering Temp. and Time 280 Temperature (°C) (a) Solder within the temperature and time combinations indicated by the slanted lines in the following graphs. (b) Excessive soldering conditions may cause dissolution of metallization or deterioration of solder-wetting on the external electrode. (c) In case of repeated soldering, the accumulated soldering time should be within the range shown in the figure below. (For example, Reflow peak temperature: 260°C, twice -> The total accumulated soldering time at 260°C is within 30 seconds.) 270 260 250 240 230 220 0 10 20 30 40 50 Time (sec.) 60 70 80 90 NCP18/21 Series Allowable Reflow Soldering Temp. and Time 280 280 270 270 Temperature (°C) Temperature (°C) Allowable Flow Soldering Temp. and Time 260 250 240 230 220 210 260 250 240 230 220 210 0 10 20 Time (sec.) 30 0 10 20 30 40 50 60 70 80 90 100 110 Time (sec.) Continued on the following page. 19 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 Temperature Sensor and Compensation Chip Type !Caution/Notice Continued from the preceding page. 2ECOMMENDED 4EMPERATURE 0ROFILE FOR 3OLDERING NCP03/15 Series Reflow Soldering Conditions 4EMPERATURE # A )NSUFFICIENT PREHEATING MAY CAUSE A CRACK ON CERAMIC BODY 4HE DIFFERENCE BETWEEN PREHEATING TEMPERATURE AND MAXIMUM TEMPERATURE IN THE PROFILE SHALL BE # (b) Rapid cooling by dipping in solvent or by other means is not recommended. 0REHEATING IN AIR Soldering MIN SEC Gradual Cooling (in air) )N CASE OF REPEATED SOLDERING THE ACCUMULATED SOLDERING TIME SHOULD BE WITHIN THE RANGE SHOWN IN THE FIGURE ABOVE 0REHEATING ± # MIN 3OLDERING # SEC NCP18/21 Series Flow Soldering Conditions 0REHEATING IN AIR 4EMPERATURE # 4EMPERATURE # Reflow Soldering Conditions Gradual Cooling Soldering (in air) MIN Soldering MIN SEC Gradual Cooling (in air) SEC 0REHEATING IN AIR 0REHEATING ± # MIN 3OLDERING # SEC 0REHEATING ± # MIN 3OLDERING # SEC 3OLDER AND &LUX 3OLDER AND 0ASTE A 2EFLOW 3OLDERING .#0 3ERIES 5SE 2!2-! TYPE OR EQUIVALENT TYPE OF SOLDER PASTE &OR your reference, we are using the solder paste below for any internal tests of this product. s2-! - 3N0BWTWT -ANUFACTURED BY !LPHA -ETALS *APAN ,TD s- "- 3N!G#UWTWTWT -ANUFACTURED BY 3ENJU -ETAL )NDUSTRY #O ,TD B &LOW 3OLDERING .#0 3ERIES We are using the solder paste below for any internal tests of this product. s3N0BWTWT s3N!G#UWTWTWT &LUX Use rosin type flux in soldering process. )F THE FLUX LISTED BELOW IS USED SOME PROBLEMS MIGHT BE caused in the product characteristics and reliability. 0LEASE DO NOT USE THE FOLLOWING FLUX s 3TRONG ACIDIC FLUX WITH HALIDE CONTENT EXCEEDING WT s 7ATER SOLUBLE FLUX (*Water-soluble flux can be defined as non rosin type flux including wash-type flux and non-wash-type flux.) #LEANING #ONDITIONS For removing the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change of the external electrodes' quality. s 0LEASE KEEP MOUNTED PARTS AND A SUBSTRATE FROM AN occurrence of resonance in ultrasonic cleaning. s 0LEASE DO NOT CLEAN THE PRODUCTS IN THE CASE OF USING A non-washed type flux. NCP03/15 NCP18/21 Solvent )SOPROPYL !LCOHOL )SOPROPYL !LCOHOL Dipping Cleaning ,ESS THAN MINUTES AT room temp. or less than MINUTES AT # MAX ,ESS THAN MINUTES AT room temp. or less than MINUTES AT # MAX ,ESS THAN MINUTES AND 7r Ultrasonic Cleaning &REQUENCY OF K(Z TO K(Z ,ESS THAN MINUTE AND 7r Frequency of several K(Z TO K(Z $RYING After cleaning, promptly dry this product. Continued on the following page. 20 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 Temperature Sensor and Compensation Chip Type !Caution/Notice Continued from the preceding page. 7. Printing Conditions of Solder Paste o The amount of solder is critical. Standard height of fillet is shown in the table below. o Too much soldering may cause mechanical stress, resulting in cracking, mechanical and/or electronic damage. Reference: Optimum Solder Amount E T Electrode Solder Solder The Solder Paste Thickness T NCP03 Part Number 100μm 1/3EVTVE NCP15 150μm 1/3EVTVE NCP18/NCP21 200μm 0.2mmVTVE 8. Adhesive Application and Curing o Thin or insufficient adhesive may result in loose component contact with land during flow soldering. o Low viscosity adhesive causes chips to slip after mounting. 21 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 Temperature Sensor and Compensation Chip Type Package Minimum Quantity Guide Quantity (pcs.) Part Number Paper Tape NCP03 15,000 NCP15 10,000 NCP18 4,000 NCP21 - Embossed Tape 4,000 Tape Carrier Packaging 1. Dimensions of Reel 2.0±0.5 ø60 W1.0 Y0 ø13.0±0.2 ø21.0±0.8 9.0 W1.0 Y0 ø180 W0 Y1.5 13.0±1.0 (in mm) 2. Taping Method (1) A tape in a reel contains Leader unit and Trailer unit where products are not packed. (Please refer to the figure at the right.) Leader Unit 190-250 210-250 40 min. Trailer Unit Vacant Section Top Tape alone Cover Tape alone (2) The top and base tapes or, plastic and cover tape are not stuck at the first five pitches minimum. Chip-mounting Unit (3) A label should be attached on the reel. (MURATA's part number, inspection number and quantity should be marked on the label.) (4) Taping reels are packed in a package. Direction of Feed (in mm) Continued on the following page. 22 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 Temperature Sensor and Compensation Chip Type Package Continued from the preceding page. 3. Paper Tape (NCP03/15/18 Series) 8.0±0.3 0.8 max. 3.5±0.05 0.38∗ Direction of Feed ø1.5+0.1/–0 1.15∗ 8.0±0.3 0.68∗ 2.0±0.05 4.0±0.1 0.5 max. 3.5±0.05 ø1.5+0.1/–0 1.75±0.1 2.0±0.05 4.0±0.1 1.75±0.1 NCP15 Series NCP03 Series 0.65∗ ∗ Reference Value Direction of Feed ∗ Reference Value 1.1 max. 1.85∗ 8.0±0.3 ø1.5+0.1/–0 3.5±0.05 2.0±0.05 4.0±0.1 4.0±0.1 1.75±0.1 NCP18 Series 1.05∗ Direction of Feed ∗ Reference Value (in mm) (1) Other Conditions (a) Packaging Products are packaged in the cavity of the base tape and sealed by top tape and bottom tape. (b) Tape Top tape and bottom tape have no joints and products are packaged and sealed in the cavity of the base tape, continuously. (2) Peeling Force of Top Tape 165-180 ° F ∗ 1 Peeling angle: 165 to 180 degree against the fixed surface of tape. ∗ 2 Peeling speed: 300mm/min. ∗ 3 Peeling force: 0.1 - 0.6N (3) Pull Strength Pull strength of top tape is specified at 10N minimum. Pull strength of bottom tape should be specified 5N minimum. Continued on the following page. 23 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 Temperature Sensor and Compensation Chip Type Package Continued from the preceding page. 4. Embossed Tape (NCP21 Series) 2.0±0.05 4.0±0.1 4.0±0.1 Products are packaged in the each cavity of Embossed tape and sealed by Cover tape. +0.1 ø1.5 -1 2.25∗ Cover tape has no joints. 3.5±0.05 (b) Tape ø1.0+0.3 -0 1.05 0.2 8.0±0.3 (a) Packaging 1.75±0.1 (1) Other Conditions 1.45∗ ∗ Reference Value Direction of Feed (in mm) (2) Peeling Force of Cover Tape 165-180 ° F ∗ 1 Peeling angle: 165 to 180 degree against the fixed surface of tape. ∗ 2 Peeling speed: 300mm/min. ∗ 3 Peeling force: 0.1 - 0.7N (3) Tape Strength Pull strength of Embossed tape and Cover tape should be specified 10N minimum. 24 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 NTC Thermistors Temperature Sensor Thermo String Type 1.2±0.4 1.2±0.4 This product is a small flexible lead type NTC Thermistor with the small head and the thin lead wire. 25 to 100±2 110 to 150±3 c Features The full length 25mm, 30 to 150mm interval 10mm. (in mm) NXFT15_1B Type(twist) 1.2±0.4 25 to 100±2 110 to 150±3 1.2±0.4 5 ø0.30±0.05 3+2/-1 c Applications 1. Temperature compensation for transistor, IC and crystal oscillator in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Part Number ø0.30±0.05 3+2/-1 1. High accuracy and high sensibility temperature sensing is available by the small size and high accuracy NTC Thermistor. 2. Narrow space temperature sensing is available by the small sensing head and the thin lead wire. 3. Flexibility and wide variety length (25 mm to 150mm) enables designing flexible temperature sensing architectures. 4. This product is compatible with our 0402 (EIA) size chip Thermistor. 5. Excellent long time aging stability 6. This is halogen free product. * * Cl= max.900ppm, Br=max.900ppm and Cl+Br=max.1500ppm 7. NXFT series are recognized by UL/cUL. (UL1434, File No.E137188). The full length 25mm, 30 to 150mm interval 10mm. (in mm) NXFT15_2B Type(without twist) Resistance B-Constant B-Constant B-Constant B-Constant Operating Current Rated Electric Typical Dissipation Thermal Time (25°C) (25-50°C) (25-80°C) (25-85°C) (25-100°C) for Sensor (25°C) Power (25°C) Constant (25°C) Constant (ohm) (K) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/°C) (25°C) (s) NXFT15XH103FApBppp 10k ±1% 3380 ±1% 3428 3434 3455 0.12 7.5 1.5 NXFT15WB473FApBppp 47k ±1% 4050 ±1% 4101 4108 4131 0.06 7.5 1.5 4 NXFT15WF104FApBppp 100k ±1% 4250 ±1% 4303 4311 4334 0.04 7.5 1.5 4 4 p is the filled with lead shape (1: twist, 2: without twist). ppp is the filled with Total-length codes. (25mm, 30 to 150mm interval 10mm, ex. 050=50mm) Operating Current for Sensor rises Thermistor's temperature by 0.1°C Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 30°C by self heating, at ambient temperature of 25 °C. Operating Temperature Range: -40°C to +125°C 25 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 Temperature Sensor Thermo String Type Specifications and Test Methods No. Item 1 High Temperature Storage Test Specifications Test Methods 125±2°C in air, for 1000 +48/-0 hours without loading. · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. 2 Low Temperature Storage Test 3 Humidity Storage Test 60±2°C, 90 to 95%RH in air, for 1000 +48/-0 hours without loading. 4 Temperature Cycle -40 +0/-3°C, 30 minutes in air +25±2°C, 10 to 15 minutes in air +125±2°C, 30 minutes in air + 25 +2/-0°C, 10 to 15 minutes in air (1 cycle) Continuous 100 cycles, without loading. 5 High Temperature Load 6 Insulation Break down Voltage -40 +0/-3°C in air, for 1000 +48/-0 hours without loading. · Resistance (R25°C) fluctuation rate: less than ±2%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. 85±2°C in air, with 'Operating Current for Sensor' for 1000 +48/-0 hrs. · No damage electrical characteristics at DC100 V, 1 min. 2mm length of coating resin from the top of Thermistor is to be dipped into beads of lead (Pb), and DC100V 1 minute is applied to circuit between beads of lead (Pb) and lead wire. Both lead wires are dipped into 350±10°C solder for 3.5±0.5 seconds, or 260±5°C solder for 10±1 seconds according to Fig-1 (solder <JIS Z 3282 H60A>). 7 Resistance to Soldering Heat · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. 5 1 to 2mm Solder Fig-1 8 Solderability More than 90% of lead wire surface shall be covered by solder. Both lead wires are dipped into flux (25wt% colophony <JIS K 5902> isopropyl alcohol <JIS K 8839>) for 5 to 10 seconds. Then both lead wires are dipped into 235±5°C solder <JIS Z 3282 H60A> for 2±0.5 seconds according to Fig-1. The lead wire shall be inserted in a ø1.0mm hole until resin part contacts with a substrate as shown in fig.-2, and 1N force for 10 seconds shall be applied to the lead wire. 9 Lead Wire Pull Strength · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. 1N (10 sec.) Fig-2 Hold the lead wires as in Fig-3. Bend by 90 degrees and again bend back to the initial position. Then bend to the other side by 90 degrees and again bend back to the initial position. After bending process, 10N force for 3 seconds shall be applied to the lead wire. 10 Lead Wire Bending Strength · Lead wire does not break. 10N (3 sec.) Fig-3 * · R25 is zero-power resistance at 25°C. · B25/50 is calculated by zero-power resistance of Thermistor in 25°C -50°C. · After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure). Continued on the following page. 26 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 Temperature Sensor Thermo String Type Specifications and Test Methods Continued from the preceding page. No. Item Specifications Test Methods NTC Thermistor shall be dropped without any force onto concrete floor from 1 meter height one time. 11 Free Fall NTC Thermistor shall be fixed to the vibration test equipment. Vibration of total 1.5 mm amplitude, Frequency sequence of 10Hz - 55Hz - 10Hz in 1 minute, shall be applied for right angled 3 directions for each 2 hours duration. 12 Vibration · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. · No visible damage at resin part. Mount Oscillating Direction Z Solder is attached from the reverse side. Oscillating Direction Y Oscillating Direction X * · R25 is zero-power resistance at 25°C. · B25/50 is calculated by zero-power resistance of Thermistor in 25°C -50°C. · After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure). 5 27 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 NTC Thermistors Temperature Sensor Lead Type 4.0 max. 2.0 max. This product is Thermistor for normal temperature level sensors having self-subsistence by strong lead strength based on chip NTC. 10.0 to 40.0±1.0 c Features 1. High accuracy and high sensibility temperature sensing is available by the high accuracy NTC Thermistor. 2. This product is compatible with 1005 (1.0mm x 0.5mm) size NTC Thermistor. 3. The variation per hour of this product is stable few. 4. This product is produced with the automation line which was consistent from a lead to packing so that the product of uniform quality may be obtained at low cost in large quantities. 5. Since this product has strong lead intensity with original lead mounting technique, it is bent at the time of use and can perform processing etc. freely. Moreover, taping supply can also respond. 2.5±1 ø0.40±0.05 The full length 10.0 to 40.0mm interval 10.0mm (in mm) c Applications 1. For temperature detection of a rechargeable battery pack 2. For temperature detection of a charge circuit 3. For temperature detection of a printer head 4. For temperature detection of DC fan motor 5. For temperature detection of home electronics 6 Part Number Resistance B-Constant B-Constant B-Constant B-Constant Operating Current Rated Electric Typical Dissipation Thermal Time (25°C) (25-50°C) (25-80°C) (25-85°C) (25-100°C) for Sensor (25°C) Power (25°C) Constant (25°C) Constant (ohm) (K) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/°C) (25°C) (s) NXRT15XM202EA1Bppp 2.0k ±3% 3500 ±1% 3539 3545 3560 0.27 7.5 1.5 4 NXRT15XH103FA1Bppp 10k ±1% 3380 ±1% 3428 3434 3455 0.12 7.5 1.5 4 NXRT15XV103FA1Bppp 10k ±1% 3936 ±1% 3972 3977 3989 0.12 7.5 1.5 4 NXRT15WB333JA1Bppp 33k ±5% 4050 ±3% 4101 4108 4131 0.07 7.5 1.5 4 NXRT15WB473FA1Bppp 47k ±1% 4050 ±1% 4101 4108 4131 0.06 7.5 1.5 4 NXRT15WF104FA1Bppp 100k ±1% 4250 ±1% 4303 4311 4334 0.04 7.5 1.5 4 ppp is the filled with Total-length codes. (10 to 40mm interval 10mm, ex. 040=40mm) Operating Current for Sensor rises Thermistor's temperature by 0.1°C. Rated Electric Power is necessary electric power that Thermistor's temperature rises 5°C by self heating at 25°C in still air. Taping type of part numbers with "3A016" is available (Lead Spacing=5mm). Operating Temperature Range: -40°C to +125°C 28 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 Temperature Sensor Lead Type Specifications and Test Methods No. Item 1 Low Temperature Storage Test Specifications Test Methods -40 +0/-3°C in air, for 1000 +48/-0 hours without loading. · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. 2 High Temperature Storage Test 3 High Temperature Load 85±2°C in air, with ‘Operating Current for Sensor’ for 1000 +48/-0 hrs. 4 Humidity Storage Test 60±2°C, 90 to 95%RH in air, for 1000 +48/-0 hours without loading. 5 Temperature Cycle 6 Insulation Break down Voltage 125±2°C in air, for 1000 +48/-0 hours without loading. · Resistance (R25°C) fluctuation rate: less than ±2%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. · No damage electrical characteristics on D.C.100 V, 1 min. -40°C +0/-3°C, 30 minutes in air +25°C±2°C, 10 to 15 minutes in air +125°C +3/-0°C, 30 minutes in air +25°C +2/-0°C, 10 to 15 minutes in air (1 cycle) Continuous 100 cycles, without loading. 2mm length of coating resin from the top of thermistor is to be dipped into beads of lead (Pb), and DC100V 1 minute is applied to circuit between beads of lead (Pb) and lead wire. Both lead wires are dipped into 350±10°C solder for 3.5±0.5 seconds, or 260±5°C solder for 10±1 seconds according to Fig-1. (solder <Sn-3Ag-0.5Cu>) 7 Resistance to Soldering Heat · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. Solder Fig-1 8 Solder Ability · More than 90% of lead wire surface shall be covered by solder. Both lead wires are dipped into flux (25wt% colophony <JIS K 5902> isopropyl alcohol <JIS K 8839>) for 5 to 10 seconds. Then both lead wires are dipped into 245±5°C solder <Sn-3Ag-0.5Cu> for 2±0.5 seconds according to Fig-1. One end of a lead wire shall be fixed and 2.5N forth for 10 seconds shall be applied to the other lead wire as shown in Fig-2. 9 Lead Wire Pull Strength 6 · Resistance(R25°C) fluctuation rate: less than ±1%. · B-Constant(B25/50°C) fluctuation rate: less than ±1%. · No visible damage at resin part. 2.5N (10sec.) Fig-2 One lead wire is held and 2.5N force is applied. Then the body of NTC thermistor is bent by 90°C and again bent back to the initial position. This sequence shall be completed twice. See Fig-3. 10 Lead Wire Bending Strength · Lead wire does not break. 90° 2.5N Fig-3 NTC thermistor shall be dropped without any force onto concrete floor from 1 meter height one time. 11 Free Fall 12 Vibration · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. · No visible damage at resin part. NTC thermistor shall be fixed to the vibration test Equipment. Vibration of total 1.5mm amplitude, Frequency sequence of 10Hz – 55Hz – 10Hz in 1 minute, shall be applied for right angled 3 directions for each 2 hours duration. * · R25 is zero-power resistance at 25°C. · B25/50 is calculated by zero-power resistance of Thermistor in 25°C-50°C. · After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure). 29 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Sensor Thermo String/Lead Type Temperature Characteristics (Center Value) Part Number NXFT15XH103 NXFT15WB473 NXFT15WF104 10kΩ 47kΩ 100kΩ Resistance 3380K 4050K 4250K B-Constant Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Y40 197.388 1690.590 4221.280 Y35 149.395 1215.320 2995.040 Y30 114.345 882.908 2147.000 Y25 88.381 647.911 1554.600 Y20 68.915 480.069 1136.690 Y15 54.166 359.009 839.019 Y10 42.889 270.868 624.987 Y5 34.196 206.113 469.678 0 27.445 158.126 355.975 5 22.165 122.267 272.011 10 18.010 95.256 209.489 15 14.720 74.754 162.559 20 12.099 59.075 127.057 25 10.000 47.000 100.000 30 8.309 37.636 79.222 35 6.939 30.326 63.167 40 5.824 24.583 50.677 45 4.911 20.043 40.904 50 4.160 16.433 33.195 55 3.539 13.545 27.091 60 3.024 11.223 22.224 65 2.593 9.345 18.323 70 2.233 7.818 15.184 75 1.929 6.571 12.635 80 1.673 5.548 10.566 85 1.455 4.704 8.873 90 1.270 4.004 7.481 95 1.112 3.422 6.337 100 0.976 2.936 5.384 105 0.860 2.528 4.594 110 0.759 2.184 3.934 115 0.673 1.893 3.380 120 0.598 1.646 2.916 125 0.532 1.436 2.522 Part Number NXRT15XM202 NXRT15XH103 NXRT15XV103 NXRT15WB333 NXRT15WB473 NXRT15WF104 2.0kΩ 10kΩ 10kΩ 33kΩ 47kΩ 100kΩ Resistance 3500K 3380K 3936K 4050K 4050K 4250K B-Constant Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) 1227.263 Y40 1747.920 4397.119 44.981 195.652 337.503 874.449 Y35 1245.428 3088.599 33.671 148.171 243.332 630.851 Y30 898.485 2197.225 25.444 113.347 177.496 460.457 Y25 655.802 1581.881 19.417 87.559 130.859 339.797 Y20 483.954 1151.037 14.955 68.237 97.428 253.363 Y15 360.850 846.579 11.619 53.650 73.230 190.766 Y10 271.697 628.988 9.097 42.506 55.529 144.964 Y5 206.463 471.632 7.178 33.892 42.467 111.087 0 158.214 357.012 5.707 27.219 32.747 85.842 5 122.259 272.500 4.568 22.021 25.450 66.861 10 95.227 209.710 3.682 17.926 19.932 52.470 15 74.730 162.651 2.986 14.674 15.727 41.471 20 59.065 127.080 2.437 12.081 12.498 33.000 25 47.000 100.000 2.000 10.000 10.000 26.430 30 37.643 79.222 1.651 8.315 8.054 21.298 35 30.334 63.167 1.370 6.948 6.529 17.266 40 24.591 50.677 1.143 5.834 5.324 14.076 45 20.048 40.904 0.958 4.917 4.366 11.538 50 16.433 33.195 0.807 4.161 3.601 9.506 55 13.539 27.091 0.682 3.535 2.985 7.870 60 11.209 22.224 0.580 3.014 2.488 6.549 65 9.328 18.323 0.495 2.586 2.083 5.475 70 7.798 15.184 0.424 2.228 1.752 4.595 75 6.544 12.635 0.365 1.925 1.480 3.874 80 5.518 10.566 0.315 1.669 1.256 3.282 85 4.674 8.873 0.273 1.452 1.070 2.789 90 3.972 7.481 0.237 1.268 0.916 2.379 95 3.388 6.337 0.207 1.110 0.787 2.038 100 2.902 5.384 0.181 0.974 0.679 1.751 105 2.494 4.594 0.160 0.858 0.588 1.509 110 2.150 3.934 0.141 0.758 0.512 1.306 115 1.860 3.380 0.124 0.672 0.446 1.134 120 1.615 2.916 0.110 0.596 0.391 0.987 125 1.406 2.522 0.098 0.531 0.343 Detailed Resistance - Temperature Tables are downloadable from the following URL. http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en 30 R44E.pdf Dec.17,2012 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Dec.17,2012 Temperature Sensor Thermo String/Lead Type !Caution/Notice c !Caution (Storage and Operating Conditions) This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all of these factors can deteriorate the product characteristics or cause failures and burn-out. 1. Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) 2. Volatile or flammable gas 3. Dusty conditions 4. Under vacuum, or under high or low pressure 5. Wet or humid locations 6. Places with salt water, oils, chemical liquids or organic solvents 7. Strong vibrations 8. Other places where similar hazardous conditions exist c !Caution (Others) Be sure to provide an appropriate fail-safe function on your product to prevent secondary damages that may be caused by the abnormal function or the failure of our product. c Notice (Storage and Operating Conditions) To keep solderability of product from declining, the following storage condition is recommended. 1. Storage condition: Temperature -10 to +40 degrees C Humidity less than 75%RH (not dewing condition) 2. Storage term: Use this product within 6 months after delivery by first-in and first-out stocking system. 3. Handling after unpacking: After unpacking, reseal product promptly or store it in a sealed container with a drying agent. 4. Storage place: Do not store this product in corrosive gas (Sulfuric acid gas, Chlorine gas, etc.) or in direct sunlight. c Notice (Rating) Use this product within the specified temperature range. Higher temperature may cause deterioration of the characteristics or the material quality of this product. c Notice (Soldering and Mounting) NXF Series Please note as shown below when you mount this product. 1. Do not melt solder in the resin head when you solder this product. If you do so, it has a possibility of wire break, electric short mode failure and wire coating break. In case you cut the lead wire of this product less than 20mm from the resin head, the heat of the melted solder at the lead wire edge is propagated easily to the resin head along the lead wire. 2. Do not touch the resin head directly with the soldering iron. It may cause the melting of solder in the resin head. 3. Do not separate the parallel lead wires 10mm or less from the resin head, when you separate parallel lead wires. 4. If you mold this product by resin, please evaluate the quality of this product before you use it. 5. Do not bend the lead wire radius 1mm or less when you bend the lead wire. c Notice (Soldering and Mounting) NXR Series Please notice as shown below when you mount this product. 1. Do not melt the solder in resin head, when you solder this product. If you melt the solder in resin head, it has posibility that the break of wire and short. In case you cut the lead wire of this product less than 8mm from resin head, the heat of melted solder at lead wire edge is propagated easily to the resin head along the lead wire. Please do not cut below this product 9mm. 2. Do not touch the resin head directly by solder iron. It may cause the melt of solder in resin head. 3. If you mold by resin this product, please evaluate the qualityl of this product before you use it. c Notice (Handling) 1. The ceramic element of this product is fragile, and care must be taken not to load an excessive press-force or not to give a shock at handling. Such forces may cause cracking or chipping. 2. Do not apply an excessive force to the lead. Otherwise, it may cause junction between lead and element to break or crack. Holding element by side lead wire is recommended when lead wire is bent or cut. 31 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 Temperature Sensor Thermo String/Lead Type Package Minimum Order Quantity Bulk Ammo Pack Taping Minimum Quantity (pcs.) Part Number NXFT 1,000 - - NXRT 500 NXRT_3A016 2,500 Part Number Minimum Quantity (pcs.) c Taping Dimensions (NXRT_3A016 Series) Δh1 P2 ΔS P Δh2 T H3 D ød I W3 W0 W1 L3 H0 W2 F P1 Item t2 Code Dimensions (mm) Pitch of Component P 12.7±1.0 Pitch of Sproket Hole P0 12.7±0.3 Lead Spacing F 5.0±1.0 Length from Hole Center to Component Center P2 6.35±1.3 Length from Hole Center to Lead P1 3.85±0.7 Body Diameter D 4.0 max. Deviation Along Tape, Left or Right 6S 0±2.0 Carrier Tape Width W3 18.0±0.5 Position of Sproket Hole W1 9.0±0.5 Lead Distance between Reference and Bottom Planes H0 16.0±1.0 Height of Component H3 7.5±1.0 l W0.5 to Y1.0 Protrusioin Length Diameter of Sproket Hole øD0 4.0±0.1 Lead Diameter ød 0.40±0.05 Total Tape Thickness t1 0.6±0.3 Total Thickness, Tape and Lead Wire t2 1.6 max. 6h1, 6h2 1.0 max. Portion to Cut in Case of Defect L3 11.0 +0 –2.0 Hold down Tape Width W0 9.5 min. Hold down Tape Position W2 1.5±1.5 T 2.0 max. Deviation Across Tape Thickness 32 t1 øD0 P0 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 NTC Thermistors Inrush Current Suppression Lead Type NTPAN : 23.0 max. NTPAJ : 20.0 max. c Features Coating Extension on Lead : to line A A 3.5±1.0 1. Lead is not contained in the ceramic element, the terminations, the solder for inner connection and the coating resin. 2. Most suitable for power supplies of less than 100W 3. Excellent recovery characteristics due to resin coating with excellent heat characteristics 4. Highly reliable 5.5 max. 10.0 max. This product effectively supresses surge currents which are generated when switching power regulators are turned on. NTPAN/NTPAJ Series ø0.8±0.05 Sn plated Cu wire 10.0±1.5 (in mm) NTPAD : 16.0 max. NTPAA : 12.0 max. c Applications 10.0 max. 1. Switching power supplies 2. CRT monitors 3. Color televisions 4. VCR-Power supplies 5. Other power circuits 5.5 max. 5.0 max. Coating Extension on Lead : to line A 3.5±1.0 A NTPAD/NTPAA Series ø0.8±0.05 Sn plated Cu wire 7.5±1.5 (in mm) 5.0 max. 6.0 max. NTPA9 : 11.0 max. NTPA7 : 9.0 max. Coating Extension on Lead : to line A A 3.5±1.0 7 NTPA7/NTPA9 Series ø0.6±0.05 Sn plated Cu wire 5.0±1.5 (in mm) Resistance (25°C) (ohm) Permissible Max. Current (25°C) (A) Permissible Max. Current (55°C) (A) Thermal Time Constant (25°C) (s) Thermal Dissipation Constant (25°C) (mW/°C) NTPAN3R0LDKB0 3.0 ±15% 5.4 4.7 135 26.8 NTPAN4R0LDKB0 4.0 ±15% 4.7 4.1 130 26.8 NTPAN6R0LDKB0 6.0 ±15% 3.9 3.4 130 26.8 NTPAJ4R0LDKB0 4.0 ±15% 4.0 3.5 125 21.8 NTPAJ6R0LDKB0 6.0 ±15% 3.4 2.9 125 21.8 NTPAJ8R0LDKB0 8.0 ±15% 3.0 2.6 130 21.8 NTPAJ100LDKB0 10.0 ±15% 2.6 2.2 130 21.8 NTPAD3R9LDNB0 3.9 ±15% 3.3 2.9 65 18.2 NTPAD5R1LDNB0 5.1 ±15% 3.0 2.6 85 18.8 NTPAD8R0LDNB0 8.0 ±15% 2.7 2.3 65 18.7 NTPAD160LDNB0 16.0 ±15% 2.0 1.7 100 19.1 NTPAA2R2LDNB0 2.2 ±15% 3.7 3.2 70 Part Number 13.5 Continued on the following page. 33 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 Continued from the preceding page. Resistance (25°C) (ohm) Permissible Max. Current (25°C) (A) Permissible Max. Current (55°C) (A) Thermal Time Constant (25°C) (s) Thermal Dissipation Constant (25°C) (mW/°C) NTPAA3R9LDNB0 3.9 ±15% 2.7 2.3 70 13.5 NTPAA5R1LDNB0 5.1 ±15% 2.5 2.2 70 13.5 NTPAA8R2LDNB0 8.2 ±15% 2.0 1.7 70 13.5 NTPAA100LDNB0 10.0 ±15% 1.7 1.5 70 13.5 NTPA9160LBMB0 16.0 ±15% 1.4 1.2 65 11.6 NTPA74R0LBMB0 4.0 ±15% 2.3 2.0 40 9.4 NTPA75R0LBMB0 5.0 ±15% 1.9 1.6 40 9.4 NTPA78R0LBMB0 8.0 ±15% 1.7 1.5 40 9.5 NTPA7100LBMB0 10.0 ±15% 1.4 1.2 40 9.5 NTPA7160LBMB0 16.0 ±15% 1.2 1.0 40 9.9 NTPA7220LBMB0 22.0 ±15% 1.0 0.88 40 9.1 Part Number NTPAD/NTPAA/NTPA9/NTPA7 series are also available on tape. The final alphabet of the part number should be "DNB0=>D6A0", "BNB0 =>B1A0". Operating Temperature Range: -20°C to +160°C c Permissible Electrolytic Capacitor Voltage (AC) 100Vrms 120Vrms 132Vrms 220Vrms 240Vrms 264Vrms NTPAN 8600μF 5972μF 4936μF 1777μF 1493μF 1234μF NTPAJ 5000μF 3472μF 2870μF 1033μF 868μF 717μF NTPAD 2700μF 1875μF 1550μF 558μF 469μF 387μF NTPAA 1400μF 972μF 803μF 289μF 243μF 201μF NTPA9 800μF 556μF 459μF 165μF 139μF 115μF 700μF 486μF 402μF 145μF 122μF 100μF 570μF 396μF 327μF 118μF 99μF 82μF 400μF 278μF 230μF 83μF 69μF 57μF Part Number NTPA74R0 NTPA75R0 NTPA78R0 NTPA7100 NTPA7160 NTPA7220 c Application Circuit c Determination of Allowable Current 1.0 –t° + 7 – Max. Current Ratio NTC 0.5 0 34 20 40 60 80 100 Ambient Temperature (°C) 120 140 160 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical) c NTPAN3R0L Type c NTPAN4R0L Type Ta=25°C Ta=25°C 1 100 0.1 0.1 1 10 1 1 100 0.1 0.01 0.01 10 0.1 Current (A) c NTPAN6R0L Type c NTPAJ4R0L Type Ta=25°C Ta=25°C 1 100 0.1 10 0.1 1 10 1 1000 Resistance Ratio Thermistor's Temperature (°C) Resistance Ratio (Rt/R25) 1 100 0.1 0.01 0.01 10 0.1 Current (A) Current (A) c NTPAJ6R0L Type c NTPAJ8R0L Type Ta=25°C Ta=25°C 1000 1 100 0.1 10 0.1 1 10 1 1000 Resistance Ratio Thermistor's Temperature (°C) Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (°C) 10 Thermistor's Temperature (°C) 10 0.01 0.01 1 100 0.1 0.01 0.01 10 0.1 Current (A) c NTPAD3R9L Type Ta=25°C Ta=25°C 1000 1 100 0.1 10 0.1 1 Current (A) 1 10 1000 Resistance Ratio Thermistor's Temperature (°C) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (°C) 10 Thermistor's Temperature (°C) 10 Resistance Ratio (Rt/R25) 1 10 1 Current (A) c NTPAJ100L Type 0.01 0.01 1 10 1 Thermistor's Temperature (°C) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (°C) 10 Thermistor's Temperature (°C) 1000 Thermistor's Temperature (°C) 10 0.01 0.01 1 10 1 Current (A) 1 100 0.1 0.01 0.01 10 0.1 1 Thermistor's Temperature (°C) 0.01 0.01 10 1000 Resistance Ratio Thermistor's Temperature (°C) Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (°C) 10 Thermistor's Temperature (°C) 1000 Thermistor's Temperature (°C) 10 1 10 Current (A) Continued on the following page. 35 7 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical) Continued from the preceding page. c NTPAD5R1L Type c NTPAD8R0L Type Ta=25°C Ta=25°C 1000 100 0.1 0.1 1 10 1 100 0.1 10 0.01 0.01 0.1 Current (A) c NTPAD160L Type c NTPAA2R2L Type Ta=25°C Ta=25°C 1000 100 0.1 10 0.1 1 10 1 1 100 0.1 10 0.01 0.01 0.1 Current (A) c NTPAA5R1L Type Ta=25°C Ta=25°C 1000 1 100 0.1 10 0.1 1 10 1 1000 Resistance Ratio Thermistor's Temperature (°C) Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (°C) 10 Thermistor's Temperature (°C) 10 0.01 0.01 1 10 1 Current (A) c NTPAA3R9L Type 1 100 0.1 10 0.01 0.01 0.1 Current (A) 1 10 1 Current (A) c NTPAA8R2L Type c NTPAA100L Type Ta=25°C 100 0.1 0.01 0.01 10 0.1 1 Current (A) 1 10 1000 Resistance Ratio Thermistor's Temperature Resistance Ratio (Rt/R25) 1 Ta=25°C 10 1 100 0.1 0.01 0.01 10 Thermistor's temperature (°C) 1000 Resistance Ratio Thermistor's Temperature (°C) Thermistor's Temperature (°C) 10 Resistance Ratio (Rt/R25) 7 Thermistor's Temperature (°C) 1 1000 Resistance Ratio Thermistor's Temperature (°C) Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (°C) 10 Thermistor's Temperature (°C) 10 0.01 0.01 1 10 1 Current (A) Thermistor's Temperature (°C) 0.01 0.01 10 1 Thermistor's Temperature (°C) 1 1000 Resistance Ratio Thermistor's Temperature (°C) Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (°C) 10 Thermistor's Temperature (°C) 10 1 0.1 1 10 Current (A) Continued on the following page. 36 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical) Continued from the preceding page. c NTPA9160L Type c NTPA74R0L Type Ta=25°C 100 0.1 10 1 0.1 1 1000 Resistance Ratio Thermistor's Temperature (°C) Resistance Ratio (Rt/R25) 1 Thermistor's temperature (°C) 1 0.1 0.01 0.01 10 Current (A) 100 10 0.1 c NTPA75R0L Type c NTPA78R0L Type Ta=25°C Ta=25°C 100 10 0.1 1 10 100 0.1 0.01 0.01 1 0.1 1 10 0.1 Current (A) c NTPA7160L Type Ta=25°C Ta=25°C 10 1000 1 100 0.1 10 1 1 10 Current (A) 100 0.1 0.01 0.01 1 0.1 1000 Resistance Ratio Thermistor's Temperature (°C) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (°C) Thermistor's Temperature (°C) 10 Resistance Ratio (Rt/R25) 1 10 1 Current (A) c NTPA7100L Type 0.01 0.01 Thermistor's Temperature (°C) 1 1000 Resistance Ratio Thermistor's Temperature (°C) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (°C) Resistance Ratio (Rt/R25) 10 1000 Thermistor's Temperature (°C) 10 0.01 0.01 1 10 1 Current (A) 10 0.1 1 Thermistor's Temperature (°C) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature 0.01 0.01 10 1000 Thermistor's Temperature (°C) Ta=25°C 10 1 10 Current (A) c NTPA7220L Type Ta=25°C 1000 Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (°C) 1 100 0.1 0.01 0.01 10 0.1 1 Thermistor's Temperature (°C) 10 1 10 Current (A) 37 7 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Inrush Current Suppression Lead Type !Caution/Notice c !Caution (Storage and Operating Conditions) 1. This product is designed for the Switching Power Supply with smoothing capacitors. Other applications of this product may result in fire. 2. Use this product within the specified maximum current. Otherwise it may catch fire in the worst case. 3. Use this product with smoothing capacitor within the specified maximum capacitance value. Otherwise it may catch fire in the worst case. 4. This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all these factors can deteriorate the product characteristics cause failure and burn-out. (1) Corrosive gas or deoxidizing gas. (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) Volatile or flammable gas (3) Dusty conditions (4) Under high or low pressure (5) Wet or humid conditions (6) Near with salt water, oils, chemical liquids or organic solvents (7) Strong vibrations (8) Other places where similar hazardous conditions exist. c !Caution (Others) Be sure to provide an appropriate fail-safe function on your product to prevent secondary damages that may be caused by the abnormal function or the failure of our product. c Notice (Storage and Operating Conditions) To keep solderability of product from declining, the following storage condition is recommended. 1. Storage condition: Temperature -10 to +40 degrees C Humidity less than 75%RH (not dewing condition) 2. Storage term: Use this product within 6 months after delivery by first-in and first-out stocking system. 7 c Notice (Rating) Use this product within the specified temperature range. Higher temperature may cause deterioration of the characteristics or the material quality of this product. c Notice (Soldering and Mounting) 1. Be sure that the preheat-up does not melt the soldering of this product. Excessive heat may cause failure to open, short or insulation break down. 2. Do not touch the body with soldering iron. The soldering point should be min. 5mm away from the root of lead wire. 38 3. Handling after unpacking: After unpacking, reseal product promptly or store it in a sealed container with a drying agent. 4. Storage place: Do not store this product in corrosive gas (Sulfuric acid gas, Chlorine gas, etc.) or in direct sunlight. R44E.pdf Dec.17,2012 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Dec.17,2012 Inrush Current Suppression Lead Type !Caution/Notice c Notice (Handling) 1. When this product is operated, temperature of some area may be about 160 (degree C). Use proper surrounding parts and material which withstand such temperature. If they are inadequate and kept at high temperature for long time, they may be deteriorated or may produce harmful gas. And, such harmful gas may deteriorate the element of this product. 2. This product does not have waterproof construction. Splashed water may cause failure mode such as deterioration of characteristics or current leak. So, do not apply cleaning to immerse it into water or any solvent. 3. The ceramic element of this product is fragile, and care must be taken not to load an excessive press-force or not to give a shock at handling. Such forces may cause cracking or chipping to the element. 4. Do not apply an excessive force to the lead wire. Otherwise, it may cause break off junction between lead wire and element, or may crack element. So, fix lead wire of element side when lead wire is bent or cut. c Notice (Others) 1. This product may allow passing higher current than its initial value when it receives inrush current again just after the last one until it cools down and recovers its original resistance enough. Be sure the highest current under actual condition on the operating repetition and the operating temperature. 2. The resin coating of this product does not guarantee insulating. Keep an adequate insulating distance to surrounding parts. 7 39 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 Inrush Current Suppression Lead Type Package c Minimum Order Quantity Bulk Ammo Pack Taping Part Number Minimum Quantity (pcs.) Part Number Minimum Quantity (pcs.) NTPAN_DKB0 50 - - NTPAJ_DKB0 100 - - NTPAD_DNB0 150 NTPAD_D6A0 400 NTPAA_DNB0 300 NTPAA_D6A0 750 NTPA9_BMB0 300 NTPA9_B1A0 1,000 NTPA7_BMB0 500 NTPA7_B1A0 1,000 c Taping Dimensions (NTPAD/NTPAA_D6A0 Series) ΔS P P2 Δh1 D Δh2 e H2 T F d 7 t1 t2 l 0 Item øD P0 W W0 L W1 H0 P1 W2 A Code Dimensions (mm) Pitch of Component P 30.0 Pitch of Sprocket Hole P0 15.0±0.3 Lead Spacing F 7.5±0.5 Length from Hole Center to Component Center P2 7.5±1.5 Length from Hole Center to Lead P1 3.75±1.0 Body Diameter D (refer to the table below) Body Thickness T (refer to the table below) Deviation Along Tape, Left or Right ΔS ±2.0 Carrier Tape Width W 18.0±0.5 Position of Sprocket Hole W1 9.0±0.5 Lead Distance between Reference and Bottom Plane H0 16.0±0.5 Height of Component H2 10.0 max. I W0.5 to Y6.0 Protrusion Length Diameter of Sprocket Hole D0 4.0±0.1 Lead Diameter d 0.8±0.05 Total Tape Thickness t1 0.6±0.3 Total Thickness, Tape and Lead Wire t2 2.0 max. Δh1, Δh2 2.0 max. Deviation Across Tape L Portion to Cut in Case of Defect 11.0+0 –2.0 Hold down Tape Width W0 11.5 min. Hold down Tape Position W2 4.0 max. e to line A Coating Extension on Lead D (mm) T (mm) NTPAD Type 16.0 max. 5.5 max. NTPAA 12.0 max. 5.0 max. Continued on the following page. 40 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Dec.17,2012 Inrush Current Suppression Lead Type Package Continued from the preceding page. c Taping Dimensions (NTPA9/NTPA7_B1A0 Series) P P2 ΔS Δh1 Δh2 D e H2 T d W2 Item Code t1 t2 0 P0 W W0 L W1 H0 F øD P1 l A Dimensions (mm) Pitch of Component P 12.7 Pitch of Sprocket Hole P0 12.7±0.3 Lead Spacing F 5.0+0.8 –0.3 Length from Hole Center to Component Center P2 6.35±1.3 Length from Hole Center to Lead P1 3.85±0.8 Body Diameter D (refer to the table below) Body Thickness T 5.0 max. Deviation Along Tape, Left or Right ΔS ±1.5 Carrier Tape Width W 18.0±0.5 Position of Sprocket Hole W1 9.0+0.5 –0.75 Lead Distance between Reference and Bottom Planes H0 16.0±1.0 Height of Component H2 6.0 max. I W0.5 to Y4.0 Protrusion Length Diameter of Sprocket Hole D0 4.0±0.3 Lead Diameter d 0.6±0.05 Total Tape Thickness t1 0.6±0.3 Total Thickness, Tape and Lead Wire t2 2.0 max. Δh1, Δh2 Deviation Across Tape Portion to Cut in Case of Defect L 1.5 max. 11.0+0 –2.0 Hold down Tape Width W0 11.0 min. Hold down Tape Position W2 4.0 max. e to line A Coating Extension on Lead Type 7 D (mm) NTPA9 11.0 max. NTPA7 9.0 max. 41 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Dec.17,2012