DATA SHEET LASER DIODE NDL7660P 1 310 nm OPTICAL CATV/ANALOG APPLICATIONS InGaAsP MQW-DFB LASER DIODE MODULE DESCRIPTION NDL7660P is a 1 310 nm DFB (Distributed Feed-Back) laser diode, that has a newly developed Multiple Quantum Well (MQW) structure, butterfly package module with optical isolator. It is especially designed for a 6 mW light source of CATV analog applications. PACKAGE DIMENSIONS FEATURES CTB = ð65 dBc • High output power Pf = 6.0 mW MIN. • Long wavelength Op = 1 310 nm • High isolation 40 dB 2.54 4 - φ 2.67 0.51 7 1 8 14 15.0 • Internal InGaAs monitor PD 12.7 ±0.13 CSO = ð60 dBc 0.9 • Low distortion in millimeters 15.24 6.0 RIN = ð155 dB/Hz 8.89 ±0.13 10 MIN. • Low noise • Internal thermoelectric cooler • Hermetically sealed 14 pin butterfly package 20.83 ±0.13 • Singlemode fiber pigtail 26.04 ±0.13 Optical Fiber SM-9/125, Length = 2 m Part Number 7.0 5.6 ORDERING INFORMATION 2.03 • High reliability 11.0 ±0.2 • Wide operating temperature range Available Connector NDL7660P Without Connector NDL7660PC With FC-UPC Connector NDL7660PD With SC-UPC Connector 29.97 ±0.13 PIN CONNECTIONS PIN No. FUNCTION PIN No. 1 2 3 4 5 6 7 COOLER ANODE THERMISTOR PD ANODE PD CATHODE CASE GROUND NC NC 8 9 10 11 12 13 14 FUNCTION NC NC CASE GROUND LD CATHODE NC LD ANODE, CASE GROUND COOLER CATHODE TOP VIEW #1 THERMISTOR Cooler #7 + PD LD #8 Document No. P11635EJ3V0DS00 (3rd edition) (Previous No. LC-2308) Date Published June 1996 P Printed in Japan – #14 © 1993 NDL7660P ABSOLUTE MAXIMUM RATINGS (TC = 25 qC) Parameter Symbol Ratings Unit Operating Case Temperature TC ð20 to +65 qC Storage Temperature Tstg ð40 to +70 qC Lead Soldering Temperature (10 s) Tsld 260 qC Optical Output Power Pf 15 mW Forward Current of LD IF 150 mA Reverse Voltage of LD VR 2.0 V Forward Current of PD IF 10 mA Reverse Voltage of PD VR 20 V Cooler Current IC 1.0 A Cooler Voltage VC 2.0 V ELECTRO-OPTICAL CHARACTERISTICS (TLD = 25 qC, TC = ð20 qC to +65 qC) Parameter Symbol Threshold Current Ith Forward Voltage VF Optical Output Power from Fiber (Recommended Operating Point) Conditions IF = 30 mA *1 Pop 0.9 TYP. MAX. Unit 20 35 mA 1.2 1.4 V 6.0 mW Spontaneous Emission Power from Fiber Ps Ib = Ith Differential Efficiency from Fiber Kd Pf d Pop 0.16 0.22 Peak Emission Wavelength Op Pf = Pop 1 290 1 310 SMSR Pf = Pop 30 35 f Pf = Pop 900 Sub-mode Suppression Ratio 1 dB Bandwidth W/A 1 330 nm dB MHz ð150 dB/Hz CSO*3 Pf = Pop ð60 ð55 dBc *3 Pf = Pop ð65 ð60 dBc *3 Pf = Pop Composite Second Order Distortion Isolation PW ð155 RIN Carrier to Noise Ratio 50 Pf = Pop *2 Relative Intensity Noise Composite Triple Beat Distortion CTB CNR Is *1. Recommended Pop value is supplied to each device. *2. Conditions : Pf = Pop, CW Measuring Bandwidth: 50 MHz to 600 MHz Optical Reflection ð40 dB *3. Conditions : Pf = Pop, Optical Modulation Index = 3.5 %/channel 79 channel unmodulated carriers (55.25 MHz to 547.25 MHz) Optical Reflection ð40 dB, Optical Loss = 5.5 dB 2 MIN. 50 35 dBc 40 dB NDL7660P ELECTRO-OPTICAL CHARACTERISTICS (Applicable to Monitor PD: TLD = 25 °C, TC = −20 °C to +65 °C) Parameter Symbol Conditions Monitor Current Im VR = 5 V, Pf = Pop Dark Current ID VR = 5 V Tracking Error γ Im = const. *4 *4. Tracking Error : γ TYP. 50 200 MAX. Unit µA 2 Pf (mW) Pf γ = 10 log op P MIN. 10 nA 0.5 dB TLD = TC = 25 °C TLD = 25 °C, TC = – 20 to + 65 °C Pop Pf Im 0 Im (@ Pf(25 °C) = Pop) ELECTRO-OPTICAL CHARACTERISTICS (Applicable to Thermistor and TE Cooler: TLD = 25 °C, TC = −20 °C to +65 °C) Parameter Symbol *5 R Thermistor Resistance Conditions TLD = 25 °C MIN. TYP. MAX. Unit 9.5 10 10.5 kΩ Cooler Current IC ∆T = 40 K 0.6 0.8 A Cooler Voltage VC ∆T = 40 K 1.1 1.5 V ∆T Cooling Capacity *6 IC = 0.8 A, Pf = Pop 40 K *5. B Constant = 3 400 ±100 K *6. ∆T = |TC - TLD| TYPICAL CHARACTERISTICS (Tc = 25 °C) FORWARD CURRENT VS. FORWARD VOLTAGE OUTPUT POWER FROM FIBER VS. LD FORWARD CURRENT 8 Output Power from Fiber Pf (mW) Forward Current I F (mA) 50 40 30 20 10 0 1 Forward Voltage VF (V) 2 7 6 5 4 3 2 1 0 10 20 30 40 50 60 Forward Current IF (mA) 3 NDL7660P TYPICAL THERMISTOR RESISTANCE VS. CASE TEMPERATURE 50 9 8 Thermister Resistance R (kΩ) Optical Output Power from Fiber Pf (mW) OUTPUT POWER FROM FIBER VS. LD MONITOR CURRENT 7 6 5 4 3 2 1 0 30 20 10 5 3 2 1 0.5 0 25 Monitor Current I m (mA) 50 75 Case Temperature TC (˚C) LONGITUDINAL MODE FREQUENCY RESPONSE 5 10 Relative Response (dB) Relative Intensity (dB) Pf = Pop –30 –70 1 300 1 310 1 320 Wavelength λ (nm) Relative Intensity Noise RIN (dB/Hz) Pf = Pop Optical reflection = –40 dB –130 –140 –150 –160 –170 0 100 200 300 400 500 Frequency f (MHz) 4 –5 0 0.2 0.4 0.6 f - Frequency f (GHz) RIN VS. FREQUENCY –120 0 600 700 0.8 1.0 NDL7660P DFB LASER DIODE FAMILY FOR CATV/ANALOG APPLICATIONS Features Pop: Operating point power (min. value) Remarks Packages 3 mW min. 4 mW min. 6 mW min. 8 mW min. 12 mW min. 15 mW min. 14 pin BFY module with SMF NDL7680P NDL7650P NDL7660P NDL7670P NDL7672P NDL7673P BFY module with monitor PD, TEC, thermistor, isolator REFERENCE Document Name Document No. NEC semiconductor device reliability/quality control system LEI-1201 Quality grade on NEC semiconductor devices IEI-1209 Semiconductor device mounting technology manual C10535E Guide to quality assurance for semiconductor devices MEI-1202 Semiconductor selection guide X10679E 5 NDL7660P CAUTION Within this module there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal. NEC Corporation DANGER INVISIBLE LASER RADIATION AVOID DIRECT EXPOSURE TO BEAM OUTPUT POWER mW MAX WAVELENGTH nm CLASS lllb LASER PRODUCT SEMICONDUCTOR LASER AVOID EXPOSURE-Invisible Laser Radiation is emitted from this aperture NEC Building, 7-1, Shiba 5-chome, Minato-ku, Tokyo 108-01, Japan Type number: Manufactured: Serial Number: This product conforms to FDA regulations as applicable to standards 21 CFR Chapter 1. Subchapter J. The export of this product from Japan is prohibited without governmental license. To export or re-export this product from a country other than Japan may also be prohibited without a license from that country. Please call an NEC sales representative. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customer must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices in "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact NEC Sales Representative in advance. Anti-radioactive design is not implemented in this product. M4 94. 11