NPN SILICON GERMANIUM RF TRANSISTOR NESG2021M16 NPN SiGe RF TRANSISTOR FOR LOW NOISE, HIGH-GAIN AMPLIFICATION 6-PIN LEAD-LESS MINIMOLD (M16, 1208 PKG) FEATURES • The device is an ideal choice for low noise, high-gain at low current amplifications NF = 0.9 dB TYP., Ga = 18.0 dB TYP. @ VCE = 2 V, IC = 3 mA, f = 2 GHz NF = 1.3 dB TYP., Ga = 10.0 dB TYP. @ VCE = 2 V, IC = 3 mA, f = 5.2 GHz • Maximum stable power gain: MSG = 22.5 dB TYP. @ VCE = 3 V, IC = 10 mA, f = 2 GHz • High breakdown voltage technology for SiGe Tr. adopted: VCEO (absolute maximum ratings) = 5.0 V • 6-pin lead-less minimold (M16, 1208 PKG) <R> ORDERING INFORMATION Part Number Order Number NESG2021M16 NESG2021M16-A NESG2021M16-T3 Package Quantity 6-pin lead-less minimold 50 pcs • 8 mm wide embossed taping (M16, 1208 PKG) (Non reel) • Pin 1 (Collector), Pin 6 (Emitter) face the (Pb-Free) NESG2021M16-T3-A Supplying Form perforation side of the tape 10 kpcs/reel Remark To order evaluation samples, please contact your nearby sales office. Unit sample quantity is 50 pcs. ABSOLUTE MAXIMUM RATINGS (T A = +25C) Parameter Symbol Ratings Unit Collector to Base Voltage VCBO 13.0 V Collector to Emitter Voltage VCEO 5.0 V Emitter to Base Voltage VEBO 1.5 V IC 35 mA 175 mW Collector Current Total Power Dissipation Ptot Note Junction Temperature Tj 150 C Storage Temperature Tstg 65 to +150 C 2 Note Mounted on 1.08 cm 1.0 mm (t) glass epoxy PCB Caution: Observe precautions when handling because these devices are sensitive to electrostatic discharge Document No. PU10393EJ03V0DS (3rd edition) Date Published September 2009 NS The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. NESG2021M16 ELECTRICAL CHARACTERISTICS (T A = +25C) Parameter Symbol Test Conditions MIN. TYP. MAX. Unit DC Characteristics Collector Cut-off Current ICBO VCB = 5 V, IE = 0 mA 100 nA Emitter Cut-off Current IEBO DC Current Gain hFE VEB = 1 V, IC = 0 mA 100 nA Note 1 VCE = 2 V, IC = 5 mA 130 190 260 fT VCE = 3 V, IC = 10 mA, f = 2 GHz 20 25 GHz VCE = 3 V, IC = 10 mA, f = 2 GHz 17.0 19.0 dB RF Characteristics Gain Bandwidth Product S21e Insertion Power Gain 2 Noise Figure (1) NF VCE = 2 V, IC = 3 mA, f = 2 GHz, ZS = ZSopt, ZL = ZLopt 0.9 1.2 dB Noise Figure (2) NF VCE = 2 V, IC = 3 mA, f = 5.2 GHz, ZS = ZSopt, ZL = ZLopt 1.3 dB Associated Gain (1) Ga VCE = 2 V, IC = 3 mA, f = 2 GHz, ZS = ZSopt, ZL = ZLopt 15.0 18.0 dB Associated Gain (2) Ga VCE = 2 V, IC = 3 mA, f = 5.2 GHz, ZS = ZSopt, ZL = ZLopt 10.0 dB VCB = 2 V, IE = 0 mA, f = 1 MHz 0.1 0.2 pF VCE = 3 V, IC = 10 mA, f = 2 GHz 20.0 22.5 dB 9 dBm 17 dBm Reverse Transfer Capacitance Maximum Stable Power Gain Cre Note 2 MSG Note 3 Gain 1 dB Compression Output Power PO (1 dB) VCE = 3 V, IC (set) = 12 mA (RF OFF), f = 2 GHz, ZS = ZSopt, ZL = ZLopt Output 3rd Order Intercept Point OIP3 VCE = 3 V, IC (set) = 12 mA (RF OFF), f = 2 GHz, ZS = ZSopt, ZL = ZLopt Notes 1. Pulse measurement: PW 350 s, Duty Cycle 2% 2. Collector to base capacitance when the emitter grounded 3. MSG = S21 S12 hFE CLASSIFICATION <R> 2 Rank FB/YFB Marking zE hFE Value 130 to 260 Data Sheet PU10393EJ03V0DS NESG2021M16 <R> TYPICAL CHARACTERISTICS (T A = +25C, unless otherwise specified) Remark The graphs indicate nominal characteristics. Data Sheet PU10393EJ03V0DS 3 NESG2021M16 Remark The graphs indicate nominal characteristics. 4 Data Sheet PU10393EJ03V0DS NESG2021M16 Remark The graphs indicate nominal characteristics. Data Sheet PU10393EJ03V0DS 5 NESG2021M16 Remark The graphs indicate nominal characteristics. 6 Data Sheet PU10393EJ03V0DS NESG2021M16 Remark The graphs indicate nominal characteristics. Data Sheet PU10393EJ03V0DS 7 NESG2021M16 Remark The graphs indicate nominal characteristics. 8 Data Sheet PU10393EJ03V0DS NESG2021M16 Remark The graphs indicate nominal characteristics. Data Sheet PU10393EJ03V0DS 9 NESG2021M16 Remark The graphs indicate nominal characteristics. <R> S-PARAMETERS 10 Data Sheet PU10393EJ03V0DS NESG2021M16 PACKAGE DIMENSIONS 6-PIN LEAD-LESS MINIMOLD (M16, 1208 PKG) (UNIT: mm) Caution All four Emitter-pins should be connected to PWB in order to obtain better Electrical performance and heat sinking. Data Sheet PU10393EJ03V0DS 11