NFM-05 5W Output Switching Power Supply series Features : Universal AC input / Full range Protections: Short circuit / Overload / Over voltage / Over temperature Ultra-miniature size, light weight Cooling by free air convection Isolation class UL60601-1/IEC60601-1/EN60601-1 medical safety approved No load power consumption<0.5W 100% full load burn-in test Fixed switching frequency at 67KHz High reliability 3 years warranty EN60601-1 IEC60601-1 SPECIFICATION MODEL DC VOLTAGE NFM-05-3.3 NFM-05-5 NFM-05-12 NFM-05-15 NFM-05-24 3.3V 5V 12V 15V 24V RATED CURRENT 1.25A 1A 0.42A 0.33A 0.23A CURRENT RANGE 0 ~ 1.25A 0 ~ 1A 0 ~ 0.42A 0 ~ 0.33A 0 ~ 0.23A RATED POWER 4.125W RIPPLE & NOISE (max.) Note.2 80mVp-p OUTPUT INPUT VOLTAGE ADJ. RANGE 4.95W 5.52W 150mVp-p 150mVp-p 240mVp-p 4.5 ~ 5.5V 10.8 ~ 13.2V 13.5 ~ 16.5V 21.6 ~ 26.4V 2.0% 2.0% 1.0% 1.0% 1.0% LINE REGULATION 1.0% 1.0% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 0.5% 0.5% 0.5% SETUP, RISE TIME 1000ms, 20ms/230VAC HOLD UP TIME (Typ.) 100ms/230VAC VOLTAGE RANGE 85 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz EFFICIENCY (Typ.) 67% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.12A/115VAC PROTECTION OVER VOLTAGE OVER TEMPERATURE Note.5 WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION (Note 4) HARMONIC CURRENT EMS IMMUNITY MTBF DIMENSION PACKING NOTE 5.04W VOLTAGE TOLERANCE Note.3 OVERLOAD OTHERS 3 ~ 3.63V 5W 80mVp-p 1000ms, 20ms/115VAC at full load 24ms/115VAC at full load 120 ~ 370VDC 71% 73% 74% 76% 0.08A/230VAC COLD START 25A/115VAC 45A/230VAC Above 105% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 13.8 ~ 16.2V 3.8 ~ 4.95V 5.75 ~ 6.75V Protection type : Shut off o/p voltage, clamping by zener diode Tj 145 typically (U1) detect on main control IC 17.25 ~ 20.25V 27.6 ~ 32.4V Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60601-1,TUV EN60601-1, IEC60601-1 approved I/P-O/P:4KVAC I/P-O/P:100M Ohms/500VDC Compliance to EN55011(CISPR11),EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN60601-1-2, EN61204-3, medical level, criteria A 738.7Khrs min. MIL-HDBK-217F (25 ) 58*45*19.1mm (L*W*H) 0.03Kg; 120pcs/4.6Kg/0.97CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. The over temperature protection (OTP) is the built-in function of the control IC (U1). The activating level described above is based on the specification provided by the IC manufacturer. File Name:NFM-05-SPEC 2007-09-19 NFM-05 5W Output Switching Power Supply Mechanical Specification series Unit:inch(mm) -V 0.789"(20.04mm) +V 0.491" (12.47mm) DC OUTPUT AC/N 0.689"(17.5mm) 1.77"(45mm) AC INPUT T2A/250V 1.85"(47mm) 2.28"(57.9mm) 0.75"(19.1mm) 0.196"(5mm) AC/L 0.21" (5.33mm) 0.07"(1.8mm) 0.177"(4.5mm) 0.041"(1.05mm) 0.138"(3.5mm) Block Diagram fosc : 67KHz POWER SWITCHING RECTIFIERS & FILTER EMI FILTER I/P RECTIFIERS & FILTER PWM CONTROL Derating Curve +V -V DETECTION CIRCUIT Output Derating VS Input Voltage Ta=25 100 100 90 80 80 70 LOAD (%) LOAD (%) 60 40 20 -20 0 10 20 30 40 50 AMBIENT TEMPERATURE ( ) 60 70 (HORIZONTAL) 60 50 40 85 95 100 115 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:NFM-05-SPEC 2007-09-19