Noise Suppression Products/EMI Suppression Filters > EMIFILr (RC Combined) > Single Circuit Type Data Sheet 1 EMIFILr (RC Combined) Single Circuit Type NFR21G Series (0805 Size) c Dimensions c Equivalent Circuit (Top View) 0.5±0.2 1.0 max. Output (Input) (3) Input (Output) (1) 1.0±0.35 0.95±0.35 2.0±0.2 1.25±0.2 (2) (Bottom View) GND (2) (1) (3) 0.3+0.2 –0.25 0.3+0.2 –0.25 (2) No polarity. : Electrode (in mm) c Insertion Loss Characteristics (Main Items) c Insertion Loss Characteristics (Main Items) (50Ω - 50Ω) 0 (50Ω - 50Ω) 0 NFR21GD4701012 10 10 NFR21GD1004702 Insertion Loss (dB) Insertion Loss (dB) NFR21GD1002202 NFR21GD4702202 20 NFR21GD4704702 NFR21GD4706802 NFR21GD1012202 30 NFR21GD1014702 20 NFR21GD1011012 30 NFR21GD1016802 40 40 50 50 1 10 100 1000 1 Frequency (MHz) 10 100 1000 Frequency (MHz) c Packaging Code Packaging Minimum Quantity L 180mm Embossed Tape 4000 B Bulk(Bag) 500 c Rated Value (p: packaging code) Part Number Capacitance Resistance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFR21GD1002202p 10pF ±20% 22ohm ±30% 50mA 50Vdc 1000M ohm -40 to +85°C NFR21GD1004702p 10pF ±20% 47ohm ±30% 35mA 50Vdc 1000M ohm -40 to +85°C NFR21GD4702202p 47pF ±20% 22ohm ±30% 50mA 50Vdc 1000M ohm -40 to +85°C NFR21GD4704702p 47pF ±20% 47ohm ±30% 35mA 50Vdc 1000M ohm -40 to +85°C NFR21GD4706802p 47pF ±20% 68ohm ±30% 30mA 50Vdc 1000M ohm -40 to +85°C NFR21GD4701012p 47pF ±20% 100ohm ±30% 25mA 50Vdc 1000M ohm -40 to +85°C NFR21GD1012202p 100pF ±20% 22ohm ±30% 50mA 50Vdc 1000M ohm -40 to +85°C NFR21GD1014702p 100pF ±20% 47ohm ±30% 35mA 50Vdc 1000M ohm -40 to +85°C Number of Circuit: 1 Continued on the following page. oThis data sheet is applied for RC Combined CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2011.11.2 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (RC Combined) > Single Circuit Type Data Sheet 2 Continued from the preceding page. Resistance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range 100pF ±20% 68ohm ±30% 30mA 50Vdc 1000M ohm -40 to +85°C 100pF ±20% 100ohm ±30% 25mA 50Vdc 1000M ohm -40 to +85°C Part Number Capacitance NFR21GD1016802p NFR21GD1011012p Number of Circuit: 1 c !Caution/Notice !Caution (Rating) Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for RC Combined CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2011.11.2 http://www.murata.com/