Vishay NFR25H0Z02208JN400 Fusible, non-flammable metal film leaded resistor Datasheet

NFR25, NFR25H
Vishay BCcomponents
Fusible, Non-Flammable Metal Film Leaded Resistors
FEATURES
• Technology: Metal film
• Overload protection without risk of fire
• Wide range of overload currents (refer Fusing
Characteristics graphs)
DESCRIPTION
• Lead (Pb)-free solder contacts
A homogeneous film of metal alloy is deposited on a high
grade ceramic body. After a helical groove has been cut in
the resistive layer, tinned connecting wires of electrolytic
copper are welded to the end-caps. The resistors are coated
with a grey, flame retardant lacquer which provides
electrical, mechanical, and climatic protection. The
encapsulant is resistant to all cleaning solvents in
accordance with IEC 60068-2-45.
• Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
• Compatible to RoHS directive 2002/95/EC
APPLICATIONS
• Audio
• Video
TECHNICAL SPECIFICATIONS
DESCRIPTION
UNIT
NFR25
NFR25H
Resistance Range (1)
Ω
0.22 to 15k
0.22 to 15k
Resistance Tolerance
%
±5
±5
E24
E24
W
0.33
0.5
K/W
240
150
≤ ± 200
≤ ± 200
4.7 Ω < R ≤ 15 Ω
≤ ± 200
≤ ± 100
15 Ω < R ≤ 15 kΩ
≤ ± 100
≤ ± 100
250
350
IEC 60 115-1
IEC 60 115-1
55/155/56
55/155/56
Load (1000 h, P70):
± (1 % R + 0.05 Ω)
± (1 % R + 0.05 Ω)
Long Term Damp Heat Test (56 Days):
± (1 % R + 0.05 Ω)
± (1 % R + 0.05 Ω)
± (0.25 % R + 0.05 Ω)
± (0.25 % R + 0.05 Ω)
Resistance Series
Rated Dissipation, P70
Thermal Resistance (Rth)
Temperature Coefficient
0.22 Ω ≤ R ≤ 4.7 Ω
ppm/K
Operating Voltage, Umax. DC or RMS
Basic Specifications
Climatic Category (IEC 60068-1)
V
Max. Resistance Change for Resistance Range,
ΔR max., after:
Soldering (260 °C, 10 s):
Notes
• R value is measured with probe distance of 24 mm ± 1 mm using 4-terminal method
(1) Ohmic values (other than resistance range) are available on request
www.vishay.com
1
For technical questions, contact: [email protected]
Document Number: 28737
Revision: 30-Mar-10
NFR25, NFR25H
Fusible, Non-Flammable Metal Film
Leaded Resistors
Vishay BCcomponents
PACKAGING
AMMOPACK
MODEL
REEL
TAPING
NFR25, NFR25H
PIECES
CODE
5000
A5
1000
A1
4000
N4
PIECES
CODE
5000
R5
-
-
Axial, 52 mm
NFR25, NFR25H
Radial
DIMENSIONS
L1
Ød
ØD
L2
Outline
DIMENSIONS (Resistor Types, Mass and Relevant Physical Dimensions)
TYPE
Dmax.
(mm)
L1 max.
(mm)
L2 max.
(mm)
Ød
(mm)
MASS
(mg)
2.5
6.5
7.5
0.58 ± 0.05
201
NFR25
NFR25H
PART NUMBER AND PRODUCT DESCRIPTION
PART NUMBER: NFR2500002207JA100
N
F
MODEL/SIZE
NFR2500
NFR25H0
R
2
5
VARIANT
0 = Neutral
Z = Value overload
(Special)
0
0
0
TCR/MATERIAL
0 = Standard
0
2
2
0
VALUE
3 digit value
1 digit multiplier
MULTIPLIER
7 = *10-3
8 = *10-2
9 = *10-1
7
J
TOLERANCE
J=±5%
0 = *100
1 = *101
2 = *102
A
1
0
PACKAGING (1)
N4
A5
A1
R5
0
SPECIAL
The 2 digits are
used for all
special parts.
00 = Standard
PRODUCT DESCRIPTION: NFR25 5 % A1 R22
NFR25
5%
MODEL/SIZE
TOLERANCE
NFR25
NFR25H
±5%
A1
PACKAGING
R22
(1)
N4
A5
A1
R5
RESISTANCE VALUE
1K0 = 1 kΩ
4R7 = 4.7 Ω
Notes
• The PART NUMBER is shown to facilitate the introduction of a unified part numbering system for ordering products
(1) Please refer packaging table
Document Number: 28737
Revision: 30-Mar-10
For technical questions, contact: [email protected]
www.vishay.com
2
NFR25, NFR25H
Fusible, Non-Flammable Metal Film
Leaded Resistors
Vishay BCcomponents
PRODUCTS WITH RADIAL LEADS (NFR25, NFR25H)
P2
P
H1
H
H0
L
L1
W0
W
P0
F
P1
D0
DIMENSIONS (Radial Taping)
SYMBOL
PARAMETER
VALUE
TOLERANCE
UNIT
P
Pitch of components
12.7
± 1.0
mm
P0
Feed-hole pitch
12.7
± 0.2
mm
P1
Feed-hole centre to lead at topside at the tape
3.85
± 0.5
mm
P2
Feed-hole center to body center
6.35
± 1.0
mm
F
Lead-to-lead distance
4.8
+ 0.7/- 0
mm
W
Tape width
18.0
± 0.5
mm
W0
Minimum hold down tape width
5.5
-
mm
H1
Component height
29.0
Max.
mm
H0
Lead wire clinch height
16.5
± 0.5
mm
H
Height of component from tape center
19.5
±1
mm
mm
D0
Feed-hole diameter
4.0
± 0.2
L
Maximum length of snipped lead
11.0
-
mm
L1
Minimum lead wire (tape portion) shortest lead
2.5
-
mm
Note
• Please refer document number 28721 “Packaging” for more detail
MARKING
The nominal resistance and tolerance are marked on the
resistor using four colored bands in accordance with
IEC 60062, marking codes for resistors and capacitors.
For ease of recognition a fifth ring is added, which is violet
for type NFR25 and white for type NFR25H.
FUNCTIONAL PERFORMANCE,
PRODUCT CHARACTERIZATION
Standard values of nominal resistance are taken from the
E24 series for resistors with a tolerance of ± 5 %.
The values of the E24 series are in accordance with
IEC 60063.
OUTLINES
The length of the body (L1) is measured by inserting the
leads into holes of two identical gauge plates and moving
these plates parallel to each other until the resistor body is
clamped without deformation (IEC 60294).
LIMITING VALUES
TYPE
LIMITING VOLTAGE U (1)
(V)
LIMITING POWER P70
(W)
NFR25
250
0.33
NFR25H
350
0.5
Note
(1) The maximum voltage that may be continuously applied to the resistor element, see IEC 60115-1. The maximum permissible hot-spot
temperature is 155 °C.
www.vishay.com
3
For technical questions, contact: [email protected]
Document Number: 28737
Revision: 30-Mar-10
NFR25, NFR25H
Fusible, Non-Flammable Metal Film
Leaded Resistors
Vishay BCcomponents
DERATING
The power that the resistor can dissipate depends on the operating temperature.
Pmax.
(% Prated)
100
50
0
- 55
0
50
70
100
Tamb (°C)
155
Maximum dissipation (Pmax.) in percentage of rated power as a function of the ambient temperature (Tamb)
FUSING CHARACTERISTICS
The resistors will fuse without the risk of fire and within an indicated range of overload. Fusing means that the resistive value of
the resistor increases at least 100 times.
The fusing characteristic is measured under constant voltage.
103
103
t
(s)
t
(s)
102
102
10
10
1
1
10-1
0
4
8
12
16
10-1
20
24
Poverload (W)
NFR25 This graph is based on measured data
which may deviate according to the application.
Fusing Characteristics: ≤ 1 Ω
0
2
4
6
8
10
12
Poverload (W)
NFR25 This graph is based on measured data
which may deviate according to the application.
Fusing Characteristics: 1 Ω ≤ R ≤ 15 Ω
103
t
(s)
102
10
1
10-1
0
2
4
6
8
10
12
Poverload (W)
NFR25 This graph is based on measured data which may deviate according to the application.
Fusing Characteristics: 15 Ω ≤ R ≤ 15 kΩ
Document Number: 28737
Revision: 30-Mar-10
For technical questions, contact: [email protected]
www.vishay.com
4
NFR25, NFR25H
Fusible, Non-Flammable Metal Film
Leaded Resistors
Vishay BCcomponents
FUSING CHARACTERISTICS
103
103
t
(s)
t
(s)
102
102
10
10
1
1
10-1
0
4
8
12
16
10-1
20
24
Poverload (W)
NFR25H This graph is based on measured data
which may deviate according to the application.
Fusing Characteristics: ≤ 1 Ω
0
4
8
12
16
20
24
Poverload (W)
NFR25H This graph is based on measured data
which may deviate according to the application.
Fusing Characteristic: 1 Ω ≤ R ≤ 15 kΩ
PULSE LOADING CAPABILITIES
103
Pˆ max.
(W)
102
tp/ti = 1000
10
1
500
200
100
50
20
10
5
2
10-1
10-6
10-5
10-4
10-3
10-2
10-1
ti (s)
1
NFR25 Pulse on a regular basis; maximum permissible peak pulse power (Pˆ max.) as a function of pulse duration (ti),
0.22 Ω ≤ R < 15 Ω
103
Pˆ max.
(W)
102
10
tp/ti = 1000
100
1
20
2
10-1
10-6
10-5
10-4
10-3
10-2
10-1
ti (s)
1
NFR25 Pulse on a regular basis; maximum permissible peak pulse power (Pˆ max.) as a function of pulse duration (ti),
15 Ω ≤ R ≤ 15 kΩ
www.vishay.com
5
For technical questions, contact: [email protected]
Document Number: 28737
Revision: 30-Mar-10
NFR25, NFR25H
Fusible, Non-Flammable Metal Film
Leaded Resistors
Vishay BCcomponents
PULSE LOADING CAPABILITIES
600
Uˆ max.
(V)
500
400
300
200
100
0
10-6
10-5
10-4
10-3
10-2
10-1
ti (s)
1
NFR25 Pulse on a regular basis; maximum permissible peak pulse voltage (Uˆ max.) as a function of pulse duration (ti)
103
Pˆ max.
(W)
102
10
tp/ti = 1000
500
200
100
50
20
10
5
1
10-1
10-6
2
10-5
10-4
10-3
10-2
10-1
ti (s)
1
NFR25H Pulse on a regular basis; maximum permissible peak pulse power (Pˆ max.) as a function of pulse duration (ti)
1200
Uˆ max.
(V)
1000
800
600
400
200
0
10-6
10-5
10-4
10-3
10-2
10-1
ti (s)
1
NFR25H Pulse on a regular basis; maximum permissible peak pulse voltage (Uˆ max.) as a function of pulse duration (ti)
Document Number: 28737
Revision: 30-Mar-10
For technical questions, contact: [email protected]
www.vishay.com
6
NFR25, NFR25H
Fusible, Non-Flammable Metal Film
Leaded Resistors
Vishay BCcomponents
APPLICATION INFORMATION
100
100
ΔT
(K)
80
ΔT
(K)
80
60
60
40
40
20
20
0
0
0.2
0.4
P (W)
0.6
0
0
0.2
0.4
P (W)
0.6
NFR25H Hot-spot temperature rise (ΔT)
as a function of dissipated power
NFR25 Hot-spot temperature rise (ΔT)
as a function of dissipated power
50
50
ΔT
(K)
40
ΔT
(K)
40
5 mm
10 mm
5 mm
30
30
10 mm
15 mm
15 mm
20
20
10
10
0
0
0.2
0.4
P (W)
0.6
0
0
0.2
0.4
P (W)
0.6
Minimum distance from resistor body to P.C.B. = 1 mm
Minimum distance from resistor body to P.C.B. = 1 mm
NFR25 Temperature rise (ΔT) at thr lead end (soldering point) as a
function of dissipated power at various lead lengths after mounting
NFR25H Temperature rise (ΔT) at thr lead end (soldering point) as a
function of dissipated power at various lead lengths after mounting
TESTS AND REQUIREMENTES
Essentially all tests are carried out in accordance with
IEC 60115-1 specification, category LCT/UCT/56 (rated
temperature range: Lower category temperature, upper
category temperature; damp heat, long term, 56 days).
The tests are carried out in accordance with IEC 60068-2-xx
test method, “Recommended basic climatic and
mechanical robustness testing procedure for electronic
components” and under standard atmospheric conditions
according to IEC 60068-1, 5.3.
www.vishay.com
7
In the Test Procedures and Requirements table the
tests and requirements are listed with reference to the
relevant clauses of IEC 60115-1 and IEC 60068-2-xx test
methods. A short description of the test procedure is also
given. In some instances deviations from the IEC
recommendations were necessary for our method of
specifying. For inflammability requirements reference is
made to IEC 60115-1.
All soldering tests are performed with mildly activated flux.
For technical questions, contact: [email protected]
Document Number: 28737
Revision: 30-Mar-10
NFR25, NFR25H
Fusible, Non-Flammable Metal Film
Leaded Resistors
Vishay BCcomponents
TEST PROCEDURES AND REQUIREMENTS
IEC
60115-1
CLAUSE
IEC
60068-2
TEST
METHOD
4.4.1
4.4.2
REQUIREMENTS
TEST
Visual examination
Dimensions (outline)
Resistance
(refer note on first page for
measuring distance)
4.5
4.18
20 (Tb)
4.29
45 (Xa)
Resistance to soldering
heat
Component solvent
resistance
4.17
20 (Ta)
Solderability
Solderability
(after aging)
4.7
4.16
Voltage proof
on insulation
Robustness of
terminations:
Tensile all samples
Bending half number
of samples
Torsion other half
of samples
4.16.2
21 (Ua1)
4.16.3
21 (Ub)
4.16.4
21 (Uc)
4.20
29 (Eb)
Bump
4.22
6 (Fc)
Vibration
4.19
14 (Na)
Rapid change of
temperature
Climatic sequence:
Dry heat
Damp heat (accelerated)
1st cycle
Cold
Low air pressure
Damp heat (accelerated)
remaining cycles
4.23
4.23.2
2 (Ba)
4.23.3
30 (Db)
4.23.4
4.23.5
1 (Aa)
13 (M)
4.23.6
30 (Db)
4.24
78 (Cab)
Damp heat
(steady state)
4.25.1
Endurance (at 70 °C)
4.25.3
Endurance at upper
category temperature
4.8
Temperature coefficient
4.12
4.26
Noise
Accidental overload
4.6.1.1
Insulation resistance
Document Number: 28737
Revision: 30-Mar-10
PROCEDURE
Gauge (mm)
Applied voltage (+ 0 %/- 10 %):
R < 10 Ω: 0.1 V
10 Ω ≤ R < 100 Ω: 0.3 V
100 Ω ≤ R < 1 kΩ: 1 V
1 kΩ ≤ R < 10 kΩ: 3 V
10 kΩ ≤ R ≤ 15 kΩ: 10 V
Thermal shock: 10 s; 260 °C;
3 mm from body
Isopropyl alcohol or H2O
followed by brushing
2 s; 235 °C:
Solder bath method; SnPb40
3 s; 245 °C:
Solder bath method; SnAg3Cu0.5
8 h steam or 16 h, 155 °C;
leads immersed 6 mm;
for 2 s at 235 °C: Solder bath (SnPb40)
for 3 s at 245 °C: Solder bath
(SnAg3Cu0.5) method
URMS = 500 V during 1 min;
metal block method
NFR25
NFR25H
No holes; clean surface; no damage
See Dimensions Table
R - Rnom.: max. ± 5 %
ΔR max.: ± (0.25 % R + 0.05 Ω)
No visual damage
Good tinning (≥ 95 % covered);
no damage
Good tinning (≥ 95 % covered);
no damage
No breakdown or flashover
Load 10 N; 10 s
Number of failures < 10 x 10-6
Load 5 N; 4 x 90°
Number of failures < 10 x 10-6
No damage
ΔR max.: ± (0.25 % R + 0.05 Ω)
No damage
ΔR max.: ± (0.25 % R + 0.05 Ω)
3 x 360° in opposite directions
3 x 1500 bumps in 3 directions; 40 g
Frequency 10 Hz to 500 Hz;
displacement 1.5 mm or acceleration
10 g; 3 directions; total 6 h (3 x 2 h)
30 min at LCT and
30 min at UCT; 5 cycles
No damage
ΔR max.: ± (0.25 % R + 0.05 Ω)
No visual damage
ΔR max.: ± (0.25 % R + 0.05 Ω)
16 h; 155 °C
24 h; 55 °C; 90 % to 100 % RH
2 h; - 55 °C
2 h; 8.5 kPa; 15 °C to 35 °C
Rins min.: 103 MΩ
ΔR max.: ± (1.5 % R + 0.1 Ω)
5 days; 55 °C; 95 % to 100 % RH
56 days; 40 °C; 90 % to 95 % RH;
loaded with 0.01 P70
(IEC steps: 0 V to 100 V)
1000 h; loaded with P70 or Umax.;
1.5 h ON and 0.5 h OFF
ΔR max.: ± (1 % R + 0.05 Ω)
1000 h; no load
ΔR max.: ± (1 % R + 0.05 Ω)
Between - 55 °C and + 155 °C
0.22 Ω ≤ R ≤ 4.7 Ω
4.7 Ω < R ≤ 15 Ω
15 Ω < R ≤ 15 kΩ
IEC 60195
Cheese-cloth
Maximum voltage Umax. DC = 500 V
after 1 min; metal block method
Rins min.: 103 MΩ
ΔR max.: ± (1 % R + 0.05 Ω)
≤ ± 200 ppm/K
≤ ± 200 ppm/K
≤ ± 200 ppm/K
≤ ± 100 ppm/K
≤ ± 100 ppm/K
≤ ± 100 ppm/K
< 0.1 μV/V
Non flammable
For technical questions, contact: [email protected]
Rins min.: 104 MΩ
www.vishay.com
8
NFR25, NFR25H
Vishay BCcomponents
Fusible, Non-Flammable Metal Film
Leaded Resistors
12NC INFORMATION FOR HISTORICAL CODING REFERENCE
Last Digit of 12NC Indicating Resistance Decade
• The resistors have a 12 digit numeric code starting with 23
• The subsequent 7 digits indicate the resistor type and
packaging
RESISTANCE DECADE
LAST DIGIT
0.22 Ω to 0.91 Ω
7
1 Ω to 9.1 Ω
8
- The first 2 digits indicate the resistance value
10 Ω to 91 Ω
9
- The last digit indicates the resistance decade
100 Ω to 910 Ω
1
1 kΩ to 9.1 kΩ
2
10 kΩ to 15 kΩ
3
• The remaining 3 digits indicate the resistance value:
12NC Example
The 12NC of a NFR25 resistor with value 750 Ω, supplied on
a bandolier of 1000 units in ammopack is: 2322 205 13751.
12NC (Resistors Type and Packaging)
23.. ... .....
TYPE
BANDOLIER IN AMMOPACK
RADIAL TAPED
BANDOLIER ON REEL
STRAIGHT LEADS
STRAIGHT LEADS
4000 UNITS
1000 UNITS
5000 UNITS
5000 UNITS
NFR25
06 204 03...
22 205 13...
22 205 33...
22 205 23...
NFR25H
06 207 03...
22 207 13...
22 207 33...
22 207 23...
www.vishay.com
9
For technical questions, contact: [email protected]
Document Number: 28737
Revision: 30-Mar-10
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Similar pages