C Series Analog Input Modules NI 9201, NI 921x, NI 9221, NI 923x • Signal conditioning for high voltage (±60 V), thermocouples, RTDs, accelerometers, microphones, strain gages, current inputs • Advanced features such as smart TEDS sensor capability, antialiasing filters, open-thermocouple detection • ±80 mV, ±10 V, or ±60 V analog input ranges • 12-, 16-, or 24-bit (delta-sigma) resolution • Up to 800 kS/s multiplexed or up to 100 kS/s simultaneous-sampling analog-to-digital converter (ADC) • Up to 32 channels per module • Up to 2,300 Vrms isolation (withstand), up to 250 Vrms isolation (continuous) • NIST-traceable calibration certificate for guaranteed accuracy Model CompactRIO NI CompactDAQ Signal Type Channels Resolution (bits) Max Sampling Rate (S/s) Signal Input Ranges Simultaneous Antialiasing Isolation Connector Options Sampling Filters NI 9201 NI 9203 NI 9205 NI 9206 Voltage Current Voltage CAT I Isolated Voltage 8 8 32 SE/16 DI 16 DI 12 16 16 16 500 k 200 k 250 k 250 k ±10 V ±20 mA, 0 to 20 mA ±10, ±5, ±1, ±0.2 V ±10, ±5, ±1, ±0.2 V NI 9211 NI 9215 NI 9217 NI 9221 NI 9233 NI 9237 Thermocouple Voltage RTD Voltage IEPE Bridge 4 4 4 8 4 4 24 16 24 12 24 24 15 100 k/ch 400 800 k 50 k/ch 50 k/ch ±80 mV ±10 V 0 to 400 Ω ±60 V ±5 V ±250 mV – – – – – – – – Screw Terminal, D-Sub Screw Terminal Spring Terminal, D-Sub Spring Terminal – – – Screw Terminal Screw Terminal, BNC Screw Terminal Screw Terminal, D-Sub BNC RJ50 – – – Table 1. C Series Analog Input Modules Selection Guide Overview High-accuracy C Series analog input modules for National Instruments CompactRIO and NI CompactDAQ provide high-performance measurements for a wide variety of industrial, in-vehicle, and laboratory sensors and signal types. Each module includes built-in signal conditioning and an integrated connector with screw terminal or cable options for flexible and low-cost signal wiring. All modules feature NI CompactRIO Extreme Industrial Certifications and Ratings. System Compatibility You can use NI C Series modules in multiple system types depending on available software. See Table 1 for CompactRIO and NI CompactDAQ module compatibility because not all modules work with both systems. Many of the advanced features described apply only to reconfigurable I/O systems and not to NI CompactDAQ. Advanced Features When used with CompactRIO, NI C Series analog input modules connect directly to reconfigurable I/O (RIO) FPGA hardware to create high-performance embedded systems. The reconfigurable FPGA hardware within CompactRIO provides a variety of options for custom timing, triggering, synchronization, filtering, signal processing, and high-speed decision making for all C Series analog modules. For instance, with CompactRIO, you can implement custom triggering for any analog sensor type on a per-channel basis using the flexibility and performance of the FPGA and the numerous arithmetic and comparision function blocks built into NI LabVIEW FPGA. Key Features • High-accuracy, high-performance analog measurements for any CompactRIO embedded system, R Series expansion chassis, or NI CompactDAQ chassis • Screw terminals, BNC, D-Sub, spring terminals, strain relief, highvoltage, cable, solder cup backshell, and other connectivity options • Available channel-to-earth ground double-isolation barrier for safety, noise immunity, and high common-mode voltage range • CompactRIO Extreme Industrial Certifications and Ratings • Built-in signal conditioning for direct connection to sensors and industrial devices Visit ni.com/compactrio or ni.com/compactdaq for up-to-date information on module availability, example programs, application notes, and other developer tools. North American Hazardous Locations C Series Module Accessories Connectivity Accessories CompactRIO and NI CompactDAQ systems are designed to provide flexible options for low-cost field wiring and cabling. Most C Series modules have a unique connector block option that offers secure and safe connections to your C Series system. Table 2 contains all of the connector blocks available for C Series I/O modules. Accessory NI 9932 NI 9933 NI 9934 NI 9935 NI 9936 NI 9939 The NI 9933 includes a screw-terminal connector with strain relief as well as a D-Sub solder cup backshell for creating custom cable assemblies for any module with a 37-pin D-Sub connector. Description 10-position strain relief and high-voltage screw-terminal connector kit 37-pin D-Sub connector kit with strain relief and D-Sub shell 25-pin D-Sub connector kit with strain relief and D-Sub shell 15-pin D-Sub connector kit with strain relief and D-Sub shell 10-position screw-terminal plugs (quantity 10) 16-position connector kit with strain relief Note: To meet shock and vibration requirements, you must affix ferrules to the ends of the wires on all screw-terminal connectors. Table 2. Connector Blocks for C Series I/O Modules Table 3 lists the recommended connector block accessories for each C Series analog input module. C Series Analog Input Module NI 9201 NI 9201 with D-Sub NI 9211 NI 9215 NI 9217 NI 9221 NI 9221 with D-Sub Figure 2. NI 9933 37-Pin D-Sub Connector Kit with Strain Relief and D-Sub Shell The NI 9934 includes a screw-terminal connector with strain relief as well as a D-Sub solder cup backshell for creating custom cable assemblies for any module with a 25-pin D-Sub connector. Recommended Module Accessory NI 9932, NI 9936 NI 99341 NI 9932, NI 9936 NI 9932, NI 9936 NI 9939 NI 9932, NI 9936 NI 99341 1Requires a 25-pin D-Sub connector such as the NI 9934 accessory kit. Table 3. Recommended Connector Block Accessories Figure 3. NI 9934 25-Pin D-Sub Connector Kit with Strain Relief and D-Sub Shell The NI 9932 kit provides strain relief and operator protection from high-voltage signals for any 10-position screw-terminal module. The NI 9935 includes a screw-terminal connector with strain relief as well as a D-Sub solder cup backshell for creating custom cable assemblies for any module with a 15-pin D-Sub connector. Figure 1. NI 9932 10-Position Strain Relief and High-Voltage Screw-Terminal Connector Kit Figure 4. NI 9935 15-Pin D-Sub Connector Kit with Strain Relief and D-Sub Shell BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.) 2 C Series Module Accessories The NI 9936 consists of 10-position screw-terminal plugs for any 10-position screw-terminal module. Figure 5. NI 9936 10-Position Screw-Terminal Plugs Visit ni.com/compactrio or ni.com/compactdaq for up-to-date information on availability of accessories. BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.) 3 CompactRIO Ordering Information Ordering Information Developer Kits NI cRIO-9961 Embedded System Developer Hardware Evaluation Kit ..................................................779107-01 NI Reconfigurable I/O Software Development Kit................................................779149-03 Reconfigurable Embedded Systems Real-Time Controllers NI cRIO-9002 ........................................................................779000-01 NI cRIO-9004 ........................................................................779055-01 Reconfigurable Chassis NI cRIO-9101 ........................................................................779052-01 NI cRIO-9102 ........................................................................779007-01 NI cRIO-9103 ........................................................................779053-01 NI cRIO-9104 ........................................................................779054-01 Power Supplies NI PS-1 ..................................................................................777567-01 NI PS-2 U.S. 120 VAC/Japan 100 VAC ..........................................777584-01 North American 240 VAC ..................................................777584-05 NI PS-3 U.S. 120 VAC/Japan 100 VAC ..........................................777585-01 North American 240 VAC ..................................................777585-05 NI PS-4 ..................................................................................778586-90 NI PS-5 ..................................................................................778805-90 R Series Expansion Systems Expansion Chassis NI cRIO-9151 chassis ............................................................779008-01 SH68-C68-S cable, 2 m ........................................................186381-02 R Series Devices PCI NI PCI-7811R digital I/O ........................................................779363-01 NI PCI-7813R digital I/O ........................................................779370-01 NI PCI-7830R multifunction I/O ............................................779361-01 NI PCI-7831R multifunction I/O ............................................778797-01 NI PCI-7833R multifunction I/O ............................................779359-01 PXI NI PXI-7811R digital I/O ........................................................778800-01 NI PXI-7813R digital I/O ........................................................779362-01 NI PXI-7830R multifunction I/O ............................................779364-01 NI PXI-7831R multifunction I/O ............................................778668-01 NI PXI-7833R multifunction I/O ............................................779360-01 C Series Modules1 Analog Input Modules NI 9201 ..................................................................................779013-01 NI 9201 with D-Sub ..............................................................779372-01 NI 9203 ..................................................................................779516-01 NI 9205 ..................................................................................779519-01 NI 9205 with D-Sub ..............................................................779357-01 NI 9206 ..................................................................................779526-01 NI 9211 ..................................................................................779001-01 NI 9215 ..................................................................................779011-01 NI 9215 with BNC..................................................................779138-01 NI 9217 ..................................................................................779592-01 NI 9221 ..................................................................................779014-01 NI 9221 with D-Sub ..............................................................779373-01 NI 9233 ..................................................................................779015-01 NI 9237 ..................................................................................779521-01 Analog Output Module NI 9263 ..................................................................................779012-01 NI 9265 ..................................................................................779334-01 Digital Input and Counter/Timer Modules NI 9401 ..................................................................................779351-01 NI 9411 ..................................................................................779005-01 NI 9421 ..................................................................................779002-01 NI 9421 with D-Sub ..............................................................779136-01 NI 9422 ..................................................................................779522-01 NI 9423 ..................................................................................779009-01 NI 9425 ..................................................................................779139-01 NI 9435 ..................................................................................779010-01 Digital Output and Relay Modules NI 9401 ..................................................................................779351-01 NI 9472 ..................................................................................779004-01 NI 9472 with D-Sub ..............................................................779137-01 NI 9474 ..................................................................................779003-01 NI 9476 ..................................................................................779140-01 NI 9477 ..................................................................................779517-01 NI 9481 ..................................................................................779006-01 Accessories NI 9912 ..................................................................................779019-01 NI 9915 ..................................................................................779018-01 NI 9917 ..................................................................................779454-01 NI 9918 ..................................................................................779455-01 NI 9932 ..................................................................................779017-01 NI 9933 ..................................................................................779103-01 NI 9934 ..................................................................................779104-01 NI 9935 ..................................................................................779016-01 NI 9936 ..................................................................................779105-01 NI 9937 ..................................................................................779106-01 NI 9939 ..................................................................................192692-01 Ethernet Cables CAT 5 5 m ....................................................................................182219-05 CAT 5 Crossover 5 m ....................................................................................187375-05 OEM Discounts Available NI offers aggressive OEM pricing discounts for high-volume OEM applications. Contact NI for a quote. 1Visit ni.com/compactrio for up-to-date information on module availability. BUY NOW! For complete product specifications, pricing, and accessory information, call 800 813 3693 (U.S.) or go to ni.com/compactrio. BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.) 4 NI CompactDAQ Ordering Information Ordering Information System Chassis NI cDAQ-9172 U.S. (120 VAC) ..................................................................779508-01 Switzerland (220 VAC) ......................................................779508-02 Australia (240 VAC) ..........................................................779508-03 Europe (240 VAC) ..............................................................779508-04 UK (240 VAC) ....................................................................779508-06 Japan (100 V) ....................................................................779508-07 C Series Modules Analog Input Modules NI 9205 ..................................................................................779519-01 NI 9205 with D-Sub ..............................................................779357-01 NI 9206 ..................................................................................779526-01 NI 9211 ..................................................................................779001-01 NI 9215 ..................................................................................779011-01 NI 9215 with BNC..................................................................779138-01 NI 9233 ..................................................................................779015-01 NI 9237 ..................................................................................779521-01 Analog Output Module NI 9263 ..................................................................................779012-01 Accessories NI 9915 ..................................................................................779018-01 NI 9901 ..................................................................................779473-01 NI 9933 ..................................................................................779103-01 NI 9940 ..................................................................................779567-01 NI 9941 ..................................................................................779568-01 NI 9917 ..................................................................................779454-01 NI 9918 ..................................................................................779455-01 NI 9932 ..................................................................................779017-01 NI 9936 ..................................................................................779105-01 Academic Bundles Standard Bundle ....................................................................777448-60 Instrumentation Bundle ........................................................777448-61 DSA (Sound and Vibration) Bundle ......................................777448-62 OEM Discounts Available NI offers aggressive OEM pricing discounts for high-volume OEM applications. Contact NI for a quote. 1Visit ni.com/compactrio or ni.com/compactdaq for up-to-date information on module availability. Digital Input Modules NI 9401 ..................................................................................779351-01 NI 9421 ..................................................................................779002-01 NI 9421 with D-Sub ..............................................................779136-01 Digital Output and Relay Modules NI 9401 ..................................................................................779351-01 NI 9472 ..................................................................................779004-01 NI 9472 with D-Sub ..............................................................779137-01 NI 9481 ..................................................................................779006-01 BUY NOW! For complete product specifications, pricing, and accessory information, call 800 813 3693 (U.S.) or go to ni.com/compactdaq. BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.) 5 NI Services and Support NI has the services and support to meet your needs around the globe and through the application life cycle – from planning and development through deployment and ongoing maintenance. We offer services and service levels to meet customer requirements in research, design, validation, and manufacturing. Visit ni.com/services. Training and Certification NI training is the fastest, most certain route to productivity with our products. NI training can shorten your learning curve, save development time, and reduce maintenance costs over the application life cycle. We schedule instructor-led courses in cities worldwide, or we can hold a course at your facility. We also offer a professional certification program that identifies individuals who have high levels of skill and knowledge on using NI products. Visit ni.com/training. Professional Services Our NI Professional Services team is composed of NI applications and systems engineers and a worldwide National Instruments Alliance Partner program of more than 600 independent consultants and integrators. Services range from start-up assistance to turnkey system integration. Visit ni.com/alliance. OEM Support We offer design-in consulting and product integration assistance if you want to use our products for OEM applications. For information about special pricing and services for OEM customers, visit ni.com/oem. ni.com • (800) 813 3693 National Instruments • [email protected] Local Sales and Technical Support In offices worldwide, our staff is local to the country, giving you access to engineers who speak your language. NI delivers industry-leading technical support through online knowledge bases, our applications engineers, and access to 14,000 measurement and automation professionals within NI Developer Exchange forums. Find immediate answers to your questions at ni.com/support. We also offer service programs that provide automatic upgrades to your application development environment and higher levels of technical support. Visit ni.com/ssp. Hardware Services NI Factory Installation Services NI Factory Installation Services (FIS) is the fastest and easiest way to use your PXI or PXI/SCXI combination systems right out of the box. Trained NI technicians install the software and hardware and configure the system to your specifications. NI extends the standard warranty by one year on hardware components (controllers, chassis, modules) purchased with FIS. To use FIS, simply configure your system online with ni.com/pxiadvisor. Calibration Services NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software specifically designed for use by metrology laboratories. Visit ni.com/calibration. Repair and Extended Warranty NI provides complete repair services for our products. Express repair and advance replacement services are also available. We offer extended warranties to help you meet project life-cycle requirements. Visit ni.com/services. *351511A-01* 351511A-01 © 2007 National Instruments Corporation. All rights reserved. CompactRIO, National Instruments, National Instruments Alliance Partner, NI, ni.com, NI CompactDAQ, and SCXI are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from NI and has no agency, partnership, or joint-venture relationship with NI. 2007-9108-301-101-D