NI NIPCIE-8235 Image acquisition from gige vision camera Datasheet

Image Acquisition from GigE Vision Cameras
NI PCIe-8231, NI PCIe-8235, NI PXIe-8234 NEW!
• Gigabit Ethernet controllers
• Up to 100 MB/s transfer rates per port
• Optimized for low CPU load
Operating Systems
• Windows Vista/XP/2000
Recommended Software
• LabVIEW
• Vision Development Module
• Vision Builder for Automated
Inspection (AI)
Driver Software (included)
• NI Vision Acquisition
Overview
Get the most performance from your GigE Vision
camera with National Instruments GigE Vision
interfaces, including the NI PCIe-8231 one-port
interface, the NI PCIe-8235 four-port interface, and the NI PXIe-8234
two-port interface. NI Vision Acquisition software is highly optimized for
these controllers and the resulting CPU usage for acquiring images from
them is extremely low. With their PCI Express-based interfaces, these
devices provide full GigE Vision bandwidth at every port, giving you the
bandwidth you need for your most demanding vision applications.
GigE Vision
High Throughput
I/O Synchronization
Cost-Effectiveness
Low CPU Usage
Cable Length
Camera Availability
Standardized Interface
Power over Cable
Specifications
GigE Vision Image Acquisition
These specifications are typical at 25 °C unless otherwise stated.
GigE Vision is a new interface standard for cameras that transmit images
over gigabit Ethernet. It provides an alternative for vision applications
requiring long cable distances or lower-cost cabling. While the cabling
is simpler, a separate cable is required to supply power to the camera.
NI Vision Acquisition software works with any gigabit Ethernet controller
but is highly optimized for Intel gigabit Ethernet controllers.
General
Number of ports.................................. 1
IEEE Standard 802.3z network topology.. 1000Base-T
Cabling
Connector ............................................ RJ45
Wiring.................................................. CAT 5 UTP, 4 pair
Length.................................................. up to 100 m
Ethernet
Ordering Information
NI PCIe-8231 (1-port PCI Express board) ..............................779813-01
NI PCIe-8235 (4-port PCI Express board) ..............................780400-01
NI PXIe-8234 (2-port PXI Express module)............................780263-01
Includes Vision Acquisition software.
BUY NOW!
For complete product specifications, pricing, and accessory
information, call 800 813 3693 (U.S.) or go to ni.com/vision.
Controller processor............................ Intel 82572EI
Data rates ........................................... 1 Gb/s
Power Requirement
3.3 VDC ............................................... 1.0 A, 3.3 W
Physical
Dimensions
NI PCIe-8231................................... 12.9 by 12.0 cm (5.1 by 4.73 in.)
NI PCIe-8235................................... 12.9 by 12.0 cm (5.1 by 4.725 in.)
NI PXIe-8234................................... 10.0 by 16.0 cm (3.9 by 6.3 in.)
Environment
Operating temperature ....................... 0 to 55 °C
IN
TA
PL
AN
MA
IN
NI Services and Support
P
DE
LO
Y
EL
OP
SERVICE
NEEDS
V
DE
NI has the services and support to meet
your needs around the globe and through
the application life cycle – from planning
and development through deployment
and ongoing maintenance. We offer
services and service levels to meet
customer requirements in research,
design, validation, and manufacturing.
Visit ni.com/services.
Training and Certification
NI training is the fastest, most certain route to productivity with our
products. NI training can shorten your learning curve, save development
time, and reduce maintenance costs over the application life cycle. We
schedule instructor-led courses in cities worldwide, or we can hold a
course at your facility. We also offer a professional certification program
that identifies individuals who have high levels of skill and knowledge on
using NI products. Visit ni.com/training.
Professional Services
Our Professional Services Team is composed of NI applications engineers,
NI Consulting Services, and a worldwide National Instruments Alliance
Partner program of more than 600 independent consultants and
integrators. Services range from
start-up assistance to turnkey
system integration.
Visit ni.com/alliance.
OEM Support
We offer design-in consulting and product integration assistance if you
want to use our products for OEM applications. For information about
special pricing and services for OEM customers, visit ni.com/oem.
ni.com • 800 813 3693
National Instruments • [email protected]
Local Sales and Technical Support
In offices worldwide, our staff is local to the country, giving you access
to engineers who speak your language. NI delivers industry-leading
technical support through online knowledge bases, our applications
engineers, and access to 14,000 measurement and automation
professionals within NI Developer Exchange forums. Find immediate
answers to your questions at ni.com/support.
We also offer service programs that provide automatic upgrades to
your application development environment and higher levels of technical
support. Visit ni.com/ssp.
Hardware Services
NI Factory Installation Services
NI Factory Installation Services (FIS) is the fastest and easiest way to
use your PXI or PXI/SCXI combination systems right out of the box.
Trained NI technicians install the software and hardware and configure
the system to your specifications. NI extends the standard warranty by
one year on hardware components (controllers, chassis, modules)
purchased with FIS. To use FIS, simply configure your system online
with ni.com/pxiadvisor.
Calibration Services
NI recognizes the need to maintain properly calibrated devices for
high-accuracy measurements. We provide manual calibration
procedures, services to recalibrate your products, and automated
calibration software specifically designed for use by metrology
laboratories. Visit ni.com/calibration.
Repair and Extended Warranty
NI provides complete repair services for our products. Express repair
and advance replacement services are also available. We offer
extended warranties to help you meet project life-cycle requirements.
Visit ni.com/services.
*351470B-01*
351470B-01
2008-10290-221-101-D
©2008 National Instruments. All rights reserved. LabVIEW, National Instruments, National Instruments Alliance Partner, NI, ni.com, and SCXI are trademarks of National Instruments.
Other product and company names listed are trademarks or trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from
National Instruments and has no agency, partnership, or joint-venture relationship with National Instruments.
Similar pages