NLSV1T240 1-Bit Dual-Supply Inverting Level Translator The NLSV1T240 is a 1−bit configurable dual−supply voltage level translator. The input An and output Bn ports are designed to track two different power supply rails, VCCA and VCCB respectively. Both supply rails are configurable from 0.9 V to 4.5 V allowing universal low−voltage translation from the input An to the output Bn port. http://onsemi.com MARKING DIAGRAM Features • • • • • • • • • Wide VCCA and VCCB Operating Range: 0.9 V to 4.5 V High−Speed w/ Balanced Propagation Delay Inputs and Outputs have OVT Protection to 4.5 V Non−preferential VCCA and VCCB Sequencing Outputs at 3−State until Active VCC is Reached Power−Off Protection Outputs Switch to 3−State with VCCB at GND Ultra−Small Packaging: 1.2 mm x 1.0 mm UDFN6 This is a Pb−Free Device UDFN6 MU SUFFIX CASE 517AA 3 M G = Specific Device Code = Date Code = Pb−Free Package PIN ASSIGNMENT Typical Applications • Mobile Phones, PDAs, Other Portable Devices Important Information • ESD Protection for All Pins: VCCA 1 6 VCCB A 2 5 B GND 3 4 OE Human Body Model (HBM) > 2000 V VCCA (Top View) VCCB ORDERING INFORMATION B A Device NLSV1T240MUTBG OE February, 2012 − Rev. 4 Package Shipping† UDFN6 3000/Tape & Reel (Pb−Free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Figure 1. Logic Diagram © Semiconductor Components Industries, LLC, 2012 3M G 1 1 Publication Order Number: NLSV1T240/D NLSV1T240 PIN ASSIGNMENT TRUTH TABLE PIN FUNCTION VCCA Input Port DC Power Supply VCCB Output Port DC Power Supply GND Ground A Input Port B Output Port OE Output Enable Inputs Outputs OE A B L L H L H L H X 3−State MAXIMUM RATINGS Symbol VCCA, VCCB VI VC VO Rating Value DC Supply Voltage Condition Unit −0.5 to +5.5 V A −0.5 to +5.5 V OE −0.5 to +5.5 V (Power Down) B −0.5 to +5.5 (Active Mode) B −0.5 to +5.5 V (Tri−State Mode) B −0.5 to +5.5 V DC Input Voltage Control Input DC Output Voltage VCCA = VCCB = 0 V IIK DC Input Diode Current −20 VI < GND mA IOK DC Output Diode Current −50 VO < GND mA IO DC Output Source/Sink Current ±50 mA ICCA, ICCB DC Supply Current Per Supply Pin ±100 mA IGND DC Ground Current per Ground Pin ±100 mA TSTG Storage Temperature −65 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. RECOMMENDED OPERATING CONDITIONS Symbol VCCA, VCCB Parameter Bus Input Voltage VC Control Input VIO Bus Output Voltage Dt / DV Max Unit 0.9 4.5 V GND 4.5 V OE GND 4.5 V B GND 4.5 V (Active Mode) B GND VCCB V (Tri−State Mode) B GND 4.5 V −40 +85 °C 0 10 nS Positive DC Supply Voltage VI TA Min (Power Down Mode) Operating Temperature Range Input Transition Rise or Rate VI, from 30% to 70% of VCC; VCC = 3.3 V ±0.3 V http://onsemi.com 2 NLSV1T240 DC ELECTRICAL CHARACTERISTICS −405C to +855C Symbol VIH VIL VOH Parameter Test Conditions Input HIGH Voltage (A, OE) Input LOW Voltage (A, OE) Output HIGH Voltage Min Max Unit 3.6 – 4.5 0.9 – 4.5 V 2.2 − 2.7 – 3.6 2.0 − 2.3 – 2.7 1.6 − 1.4 − 2.3 0.65 * VCCA − 0.9 – 1.4 0.9 * VCCA − 0.9 – 4.5 − 0.8 2.7 – 3.6 − 0.8 2.3 – 2.7 − 0.7 1.4 − 2.3 − 0.35 * VCCA 0.9 – 1.4 − 0.1 * VCCA IOH = −100 mA; VI = VIL 0.9 – 4.5 0.9 – 4.5 VCCB – 0.2 − IOH = −0.5 mA; VI = VIL 0.9 0.9 0.75 * VCCB − IOH = −2 mA; VI = VIL 1.4 1.4 1.05 − IOH = −6 mA; VI = VIL 1.65 1.65 1.25 − 2.3 2.3 2.0 − 2.3 2.3 1.8 − 2.7 2.7 2.2 − 2.3 2.3 1.7 − IOH = −18 mA; VI = VIL Output LOW Voltage VCCB (V) 3.6 – 4.5 IOH = −12 mA; VI = VIL VOL VCCA (V) 3.0 3.0 2.4 − IOH = −24 mA; VI = VIL 3.0 3.0 2.2 − IOL = 100 mA; VI = VIH 0.9 – 4.5 0.9 – 4.5 − 0.2 IOL = 0.5 mA; VI = VIH 1.1 1.1 − 0.3 IOL = 2 mA; VI = VIH 1.4 1.4 − 0.35 IOL = 6 mA; VI = VIH 1.65 1.65 − 0.3 IOL = 12 mA; VI = VIH 2.3 2.3 − 0.4 2.7 2.7 − 0.4 2.3 2.3 − 0.6 3.0 3.0 − 0.4 IOL = 18 mA; VI = VIH IOL = 24 mA; VI = VIH V V V 3.0 3.0 − 0.55 Input Leakage Current VI = VCCA or GND 0.9 – 4.5 0.9 – 4.5 −1.0 1.0 mA IOFF Power−Off Leakage Current OE = 0 V 0 0.9 – 4.5 0.9 – 4.5 0 −1.0 −1.0 1.0 1.0 mA ICCA Quiescent Supply Current VI = VCCA or GND; IO = 0, VCCA = VCCB 0.9 – 4.5 0.9 − 4.5 − 1.0 mA ICCB Quiescent Supply Current VI = VCCA or GND; IO = 0, VCCA = VCCB 0.9 – 4.5 0.9 − 4.5 − 1.0 mA ICCA + ICCB Quiescent Supply Current VI = VCCA or GND; IO = 0, VCCA = VCCB 0.9 – 4.5 0.9 – 4.5 − 2.0 mA II DICCA Increase in ICC per Input Voltage, Other Inputs at VCCA or GND VI = VCCA – 0.6 V; VI = VCCA or GND 4.5 3.6 4.5 3.6 − 10 5.0 mA DICCB Increase in ICC per Input Voltage, Other Inputs at VCCA or GND VI = VCCA – 0.6 V; VI = VCCA or GND 4.5 3.6 4.5 3.6 − 10 5.0 mA I/O Tri−State Output Leakage Current TA = 25°C, OE = 0 V 0.9 – 4.5 0.9 – 4.5 −1.0 1.0 mA IOZ http://onsemi.com 3 NLSV1T240 TOTAL STATIC POWER CONSUMPTION (ICCA + ICCB) −405C to +855C VCCB (V) 4.5 VCCA (V) Min 3.3 Max Min 2.8 Max Min 1.8 Max Min 0.9 Max Min Max Unit 4.5 2 2 2 2 < 1.5 mA 3.3 2 2 2 2 < 1.5 mA 2.8 <2 <1 <1 < 0.5 < 0.5 mA 1.8 <1 <1 < 0.5 < 0.5 < 0.5 mA 0.9 < 0.5 < 0.5 < 0.5 < 0.5 < 0.5 mA NOTE: Connect ground before applying supply voltage VCCA or VCCB. This device is designed with the feature that the power−up sequence of VCCA and VCCB will not damage the IC. AC ELECTRICAL CHARACTERISTICS −405C to +855C VCCB (V) 4.5 Symbol tPLH, tPHL (Note 1) tPZH, tPZL (Note 1) tPHZ, tPLZ (Note 1) tOSHL, tOSLH (Note 1) Min 3.3 Max Min 2.8 Max Min 1.8 Max Max Unit 2.1 2.3 nS 2.3 2.6 2.3 2.5 2.8 2.4 2.5 2.7 3.0 2.4 2.7 2.8 3.0 3.3 4.5 2.6 3.8 4.0 4.1 4.3 3.3 3.7 3.9 4.1 4.3 4.6 2.5 3.9 4.1 4.3 4.5 4.8 1.8 4.1 4.4 4.5 4.7 5.0 1.2 4.4 4.7 4.8 5.0 5.3 4.5 2.6 3.8 4.0 4.1 4.3 3.3 3.7 3.9 4.1 4.3 4.6 2.5 3.9 4.1 4.3 4.5 4.8 1.8 4.1 4.4 4.5 4.7 5.0 1.2 4.4 4.7 4.8 5.0 5.3 4.5 0.15 0.15 0.15 0.15 0.15 3.3 0.15 0.15 0.15 0.15 0.15 2.5 0.15 0.15 0.15 0.15 0.15 1.8 0.15 0.15 0.15 0.15 0.15 1.2 0.15 0.15 0.15 0.15 0.15 Parameter VCCA (V) Propagation Delay, 4.5 1.6 1.8 2.0 3.3 1.7 1.9 2.1 A to B 2.8 1.9 2.1 1.8 2.1 1.2 Output Enable, OE to B Output Disable, OE to B Output to Output Skew, Time Min 1.2 Max Min nS nS nS 1. Propagation delays defined per Figure 2. CAPACITANCE Symbol Parameter Test Conditions Typ (Note 2) Unit CIN Control Pin Input Capacitance VCCA = VCCB = 3.3 V, VI = 0 V or VCCA/B 3.5 pF CI/O I/O Pin Input Capacitance VCCA = VCCB = 3.3 V, VI = 0 V or VCCA/B 5.0 pF CPD Power Dissipation Capacitance VCCA = VCCB = 3.3 V, VI = 0 V or VCCA, f = 10 MHz 5.0 pF 2. Typical values are at TA = +25°C. 3. CPD is defined as the value of the IC’s equivalent capacitance from which the operating current can be calculated from: ICC(operating) ^ CPD x VCC x fIN where ICC = ICCA + ICCB. http://onsemi.com 4 NLSV1T240 VCC Pulse Generator RL DUT CL VCCO x 2 OPEN GND RL Figure 2. AC (Propagation Delay) Test Circuit Test Switch tPLH, tPHL OPEN tPLZ, tPZL VCCO x 2 tPHZ, tPZH GND CL = 15 pF or equivalent (includes probe and jig capacitance) RL = 2 kW or equivalent ZOUT of pulse generator = 50 W VIH Input (A) Vm Vm tPHL tPLH Output (B) Vm 0V VOH Vm VOL Waveform 1 − Propagation Delays tR = tF = 2.0 ns, 10% to 90%; f = 1 MHz; tW = 500 ns VIH OEn Vm Vm tPZH 0V tPHZ Output (B) VOH VY Vm ≈0V tPZL tPLZ ≈ VCC Vm Output (B) VX VOL Waveform 2 − Output Enable and Disable Times tR = tF = 2.0 ns, 10% to 90%; f = 1 MHz; tW = 500 ns Figure 3. AC (Propagation Delay) Test Circuit Waveforms VCC Symbol 3.0 V – 4.5 V 2.3 V − 2.7 V 1.65 V − 1.95 V 1.4 V − 1.6 V 0.9 V − 1.3 V VmA VCCA/2 VCCA/2 VCCA/2 VCCA/2 VCCA/2 VmB VCCB/2 VCCB/2 VCCB/2 VCCB/2 VCCB/2 VX VOL x 0.1 VOL x 0.1 VOL x 0.1 VOL x 0.1 VOL x 0.1 VY VOH x 0.9 VOH x 0.9 VOH x 0.9 VOH x 0.9 VOH x 0.9 http://onsemi.com 5 NLSV1T240 PACKAGE DIMENSIONS UDFN6 1.2 x 1.0, 0.4P CASE 517AA ISSUE C EDGE OF PACKAGE PIN ONE REFERENCE 2X 0.10 C ÉÉ ÉÉ ÉÉ L1 E DETAIL A Bottom View (Optional) TOP VIEW 2X EXPOSED Cu 0.10 C (A3) 0.10 C A1 A 10X 0.08 C ÉÉÉ ÉÉÉ A3 DETAIL B Side View (Optional) 5X MILLIMETERS MIN MAX 0.45 0.55 0.00 0.05 0.127 REF 0.15 0.25 1.20 BSC 1.00 BSC 0.40 BSC 0.30 0.40 0.00 0.15 0.40 0.50 MOUNTING FOOTPRINT* 6X 6X 0.42 C A1 DIM A A1 A3 b D E e L L1 L2 MOLD CMPD SEATING PLANE SIDE VIEW 1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.25 AND 0.30 mm FROM TERMINAL. 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. A B D 0.22 L 3 L2 6X b 0.10 C A B 0.05 C 6 0.40 PITCH 4 e NOTE 3 1.07 DIMENSIONS: MILLIMETERS *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. BOTTOM VIEW ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NLSV1T240/D