PRELIMINARY DATA SHEET RECEIVER NR4510US,NR4510UT φ 50 µm InGaAs APD RECEIVER FOR 2.5 Gb/s ROSA WITH INTERNAL PRE-AMPLIFIER DESCRIPTION The NR4510US and NR4510UT are InGaAs APD ROSAs with an internal pre-amplifier in a receptacle type package designed for SFF/SFP transceiver with LC duplex receptacle. Synchronous Digital These devices are ideal as a receiver for Hierarchy (SDH) system, STM-16, ITU-T recommendations. FEATURES • Internal pre-amplifier • Sensitivity S = 0.80 A/W MIN. @ λ = 1.31 µm S = 0.85 A/W MIN. @ λ = 1.55 µm • Minimum receiver sensitivity Pr = −34 dBm • Wide operating temperature range TC = −40 to +85°C • 50 Ω differential output • Small package φ 4.6 mm ROSA (Total length 12.0 mm MAX.) • Based on Telcordia reliability The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Document No. PL10510EJ01V0DS (1st edition) Date Published October 2004 CP(K) NR4510US,NR4510UT PACKAGE DIMENSIONS (UNIT: mm) φ 4.75±0.1 BOTTOM VIEW φ 2.92 NR4510US φ 0.8 MAX. φ 3.4 OPTICAL REFERENCE PLANE VCC Vpd Vout (–) φ 4.75±0.1 Vout (+) (2.16) 5– φ 0.3±0.05 P.C.D. = φ 2.5 NR4510UT (φ 4.75) (1.76) 1.0 φ 0.8 MAX. GND 45˚ Vpd 30˚ φ 0.8 MAX. VCC 4– φ 0.6±0.15 Vout (+) φ 2.5 P.C.D (2.16) φ 4.56 Vout (–) (1.51) 5– φ 0.3 0.3 MAX. 12.5±0.5 4– φ 0.6±0.15 30˚ 45˚ GND (1.51) 4.045±0.05 1.1±0.05 0.55±0.05 6.99±0.2 11.5±0.5 (1.76) 5– φ 0.3±0.05 P.C.D. = φ 2.5 PIN CONNECTIONS 2 Symbol Function Vpd VCC Vout (+) Vout (–) GND PD cathode Pre-amplifer power supply (+3.3 V) Data output (+) Data output (–) Case ground Preliminary Data Sheet PL10510EJ01V0DS NR4510US,NR4510UT ORDERING INFORMATION Part Number NR4510US-AZ* Package Bottom View GND φ 4.6 mm ROSA VCC Vpd Vout (–) Vout (+) GND NR4510UT-AZ* VCC Vout (+) Vpd Vout (–) *Note Please refer to the last page of this data sheet “Compliance with EU Directives” for Pb-Free RoHS Compliance Information. ABSOLUTE MAXIMUM RATINGS Parameter Symbol Ratings Unit IR 1.5 mA Pre-amplifier IC Supply Voltage VCC 4.5 V Operating Case Temperature TC −40 to +85 °C Storage Temperature Tstg −40 to +85 °C Lead Soldering Temperature Tsld 350 (3 sec.) °C Reverse Current Preliminary Data Sheet PL10510EJ01V0DS 3 NR4510US,NR4510UT ELECTRO-OPTICAL CHARACTERISTICS (TC = −40 to +85°C, VCC = 3.3 V, λ = 1.31 µm, 1.50 to 1.62 µm, unless otherwise specified) Parameter Reverse Break Down Voltage Temperature Coefficient of Reverse Symbol Conditions ID = 100 µA VBR MIN. TYP. MAX. Unit 40 60 70 V 0.15 %/°C 500 nA −32 dBm 0.09 δ Breakdown Voltage Dark Current Minimum Receiver Sensitivity ID VR = 0.9 VBR, TC = 85°C −10 Pr 2.48832 Gb/s, BER = 10 , −34 PRBS = 2 −1, ER = 10 dB, NRZ, 23 AC-coupled, Mopt Maximum Optical Input Power 2.48832 Gb/s, BER = 10− , Povl 10 −6 dBm −5 PRBS = 2 −1, ER = 10 dB, NRZ, 23 AC-coupled, M = 3 Sensitivity Cut-off Frequency S fC M = 1, λ = 1.31 µm 0.8 M = 1, λ = 1.55 µm 0.85 AC-coupled, RL = 50 Ω, M = 10, 1.7 A/W 1.9 GHz −3 dB Ref to 100 MHz Optical Return Loss Transimpedance ORL Zt SMF f = 100 MHz, 50 Ω single-ended, 27 dB 1.25 1.4 kΩ 3.15 3.3 3.4 5 V 45 60 mA AC-coupled 50 Ω load Pre-amplifier IC Supply Voltage VCC Pre-amplifier IC Supply Current ICC 4 VCC = 3.15 to 3.45 V Preliminary Data Sheet PL10510EJ01V0DS NR4510US,NR4510UT REFERENCE Do cume nt Nam e D o c u me n t N o . OPTICAL SEMICONDUCTOR DEVICES FOR FIBEROPTIC COMMUNICATIONS SELECTION GUIDE PL10161E Opto-Electronics Devices Pamphlet PX10160E Preliminary Data Sheet PL10510EJ01V0DS 5 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.