SaRonix Crystal Clock Oscillator 3.3V, LVCMOS / HCMOS, Tri-State Technical Data NTH / NCH Series Frequency Range: 0.5 MHz to 106.25 MHz Frequency Stability: ±20, ±25, ±50 or ±100 ppm over all conditions: calibration tolerance, operating temperature, input voltage change, load change, 30 day aging, shock and vibration. Temperature Range: Operating: Storage: 0 to +70°C or -40 to +85°C, See Part Numbering Guide -55 to +125°C Supply Voltage: Recommended Operating: 3.3V ±10% 20mA 25mA 30mA 35mA Supply Current: ACTUAL SIZE Description Output Drive: A crystal controlled, low current, low jitter and high frequency oscillator with precise rise and fall times demanded in networking applications. The tri-state function on the NTH enables the output to go high impedance. Device is packaged in a 14 or an 8-pin DIP compatible resistance welded, all metal grounded case to reduce EMI. True SMD DIL14 versions for IR reflow are available, select option "S" in part number builder. See separate data sheet for SMD package dimensions. Applications & Features • • • • • • • • • • • max, 0.5 to 30 MHz max, 30+ to 50 MHz max, 50+ to 80 MHz max, 80+ to 106.25 MHz ADSL, DSL DS3, ES3, E1, STS-1, T1 Ethernet Switch, Gigabit Ethernet Fibre Channel Controller MPEG Network Processors Voice Over Packet 32 Bit Microprocessors Tri-State output on NTH LVCMOS / HCMOS compatible Available up to 106.25 MHz HCMOS Symmetry: Rise and Fall Times: Logic 0: Logic 1: Load: Period Jitter RMS: 45/55% max 0.5 to 70 MHz max 40/60% max @ 50% VDD 4ns max 0.5 to 50 MHz, 20% to 80% V DD 3ns max 50+ to 80 MHz 1.5ns max 80+ to 106.25 MHz 10% VDD max 90% VDD min 50 pF, 0.5 to 50 MHz 30pF, 50+ to 70 MHz 15pF, 70+ to 106.25 MHz 8ps max Mechanical: Shock: Solderability: Terminal Strength: Vibration: Solvent Resistance: Resistance to Soldering Heat: MIL-STD-883, MIL-STD-883, MIL-STD-883, MIL-STD-883, MIL-STD-202, MIL-STD-202, Method 2002, Condition B Method 2003 Method 2004, Conditions A & C Method 2007, Condition A Method 215 Method 210, Condition A, B or C Environmental: Gross Leak Test: Fine Leak Test: Thermal Shock: Moisture Resistance: MIL-STD-883, MIL-STD-883, MIL-STD-883, MIL-STD-883, Method Method Method Method 1014, Condition C 1014, Condition A2 1011, Condition A 1004 Output Waveform CMOS Tf Tr Logic 1 80% VDD 50% VDD 20% VDD Logic 0 SYMMETRY SaRonix DS-159 REV D 141 Jefferson Drive • Menlo Park, CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894 SaRonix Crystal Clock Oscillator 3.3V, LVCMOS / HCMOS, Technical Data NTH / NCH Series Package Details Part Numbering Guide FULL SIZE PACKAGE NTH 0 8 0 C 21.0 max .825 0.91 .036 max 5.08 max .200 .46±.08 .018±.003 6.35±0.51 0.25±0.02 15.24±.13 .600±.005 Pin 1 Tri-State - NTH N/C - NCH Pin 7 GND (4) Glass Insulators Packing Method (T) = Tape & Reel for SMD versions, full reel increments only, 200pcs (full size) or 250pcs (half size) Blank = Bulk Symmetry 0 = 40/60% max, 0 to 70°C 2 = 40/60% max, -40 to 85°C A = 45/55% max, 0 to 70°C, 70 MHz max C = 45/55% max, -40 to 85°C, 70 MHz max Frequency Range 3 = 0.5 to 6 MHz 6 = 6+ to 24 MHz 8 = 24+ to 106.25 MHz Frequency (MHz) 3.3V Supply Stability Tolerance C = ±100ppm B = ±50ppm A = ±25ppm, 0 to +70°C only AA = ±20ppm, 0 to +70°C only Package 0 = Full Size, Thru-Hole 9 = Half Size, Thru-Hole K = Full Size, Gull Wing J = Half Size, Gull Wing N = Half Size, Gull Wing, Spanked Leads S = Full Size, True SMD Adaptor (see separate data sheet for dimensions) 13.0 max .510 Pin 14 +3.3 VDC 3 - 40.0000 (T) NTH = Pin 1: Tri state, LVCMOS NCH = Pin 1: N/C, LVCMOS 7.75 max .305 Pin 8 Output Standard Marking Format** Tri-State Logic Table (NTH only) Includes Date Code, Frequency & Part Number SARONIX XTAL OSC Denotes Pin 1 13.0 max .510 5.08 max .200 Logic 1 or NC Oscillation Logic 0 or GND High Impedance Required Input Levels on Pin 1: Logic 1 = 2.2V min Logic 0 = 0.8V max Oscillation @ VIN, 2.2V min High Impedance @ VIN, 0.8V max 50KΩ min Disable Output Delay: 100ns max Test Circuit 6.35±0.51 0.25±0.02 .46±.08 .018±.003 Pin 1 Tri-State - NTH N/C - NCH Pin 8 (5) Output Output: Output: Internal Pullup Resistance Control Input: HALF SIZE PACKAGE 0.91 max .036 Pin 1 Input 7.62±.20 .300±.008 TEST POINT mA M Pin 4 GND Pin 8 (5) Pin 14 (8) V DD 1.5 .059 120° 13.0 .510 max 120° 120° 7.62±.20 .300±.008 POWER SUPPLY OSCILLATOR VM GND Pin 1 (1) * Pin 8 +3.3 VDC 1.7 .067 6.0 .236 Pin 5 Output Standard Marking Format** Includes Date Code, Frequency & Part Number OUT Pin 7 (4) CL = 50 pF, 0.5 to 50 MHz CL = 30 pF, 50+ to 70 MHz CL = 15pF, 70+ to 106.25 MHz (Note A) TRI-STATE INPUT (NTH only) NOTE A: CL includes probe and fixture capacitance *( ) Indicates pin numbers for half-size package SARONIX Denotes Pin 1 All specifications are subject to change without notice. **Exact location of items may vary DS-159 SaRonix REV D 141 Jefferson Drive • Menlo Park, CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894 SaRonix True SMD Adaptor - 7.57mm High Technical Data REV A SaRonix 141 Jefferson Drive • Menlo Park, CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894