SaRonix Crystal Clock Oscillator 3.3 & 5V, HCMOS, TTL, SMD Technical Data ACTUAL SIZE NTH / NTT Series, Type H Frequency Range: 1 MHz to 70 MHz Frequency Stability: ±50 or ±100 ppm over all conditions: calibration tolerance, operating temperature, input voltage change, load change, aging, shock and vibration. Temperature Range: Operating: Storage: 0°C to +70°C or -40°C to +85°C -55°C to +125°C Supply Voltage: Recommended Operating: 5V ±10% or 3.3V ±10% (HCMOS only) Supply Current: 1 MHz to 26 MHz: 26+ MHz to 50 MHz: 50+ MHz to 70 MHz: 5V, 10TTL/30pF 15mA max 30mA max 45mA max 3.3V, 30pF 15mA max 25mA max 25mA max 5V, 50pF 35mA max 45mA max Output Drive: HCMOS A crystal controlled, 3.3 or 5 volt, low current oscillator designed to drive low power, high performance microprocessors. The plastic-molded surface mountable package is ideal for today's automated assembly environments. J-leads are compatible with EIA standard footprints. The HCMOS device is capable of driving both CMOS and TTL loads. Applications & Features • Footprint compatible and direct replacement for SG615 series • Frequency range from 1 to 70 MHz • 3.3V and 5V operations • Tri-State output standard • Low voltage CMOS, HCMOS and TTL compatible • Ideally suited for use with contemporary MPUs and custom ASICs • Perfect for PCs, laptop, portable applications; disc drives - anywhere small size, low power and surface mountability are a priority • EIA standard SO-J-20 foot-print • Compact, plastic-molded SMD • Available on tape & reel; 24mm tape, 1000pcs per reel Symmetry: Rise & Fall Times: Logic 0: Logic 1: Load: Period Jitter RMS: TTL (5V) Symmetry: Rise & Fall Times: Logic 0: Logic 1: Load: Period Jitter RMS: 40/60% or 45/55% max @ 50% VDD, See Part Numbering Guide 8ns max 20% to 80% V DD @ 5V 4ns max 20% to 80% V DD @ 3.3V 10% VDD max or 0.4V max @ 3.3V 90% VDD min or VDD -0.4 min @ 3.3V 50pF max to 50 MHz, 30pF 50+ to 70 MHz 30pF @ 3.3V operation 8ps max 40/60% or 45/55% max @ 1.5V level, See Part Numbering Guide 8ns max 0.5 to 2.5V 0.5V max 2.5V min 10 TTL to 50 MHz, 5 TTL 50+ to 70 MHz 8ps max Mechanical: Shock: Solderability: Terminal Strength: Vibration: Solvent Resistance: Resistance to Soldering Heat: Environmental: Thermal Shock: Moisture Resistance: MIL-STD-883, MIL-STD-883, MIL-STD-883, MIL-STD-883, MIL-STD-202, MIL-STD-202, Method 2002, Condition B Method 2003 Method 2004, Condition B2 Method 2007, Condition A Method 215 Method 210, Condition I or J MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 Solder Reflow Guide Output Waveform CMOS Temperature – °C Description 250 200 Reflow 240 max Tr TTL Tf Tr Tf 4°C/sec max Preheat 183 ±10°C Cooling VDD LOGIC 1 80% VDD 150 50% VDD 4°C/sec max 2.5 VDC 1.5 VDC 0.5 VDC 20% VDD LOGIC 0 Time 1 – 2 minutes 10 sec max GND SYMMETRY DS-111 SaRonix SYMMETRY REV K 141 Jefferson Drive • Menlo Park, CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894 SaRonix Crystal Clock Oscillator 3.3 & 5V, HCMOS, TTL, SMD Technical Data NTH / NTT Series, Type H Tri-State Logic Table Part Numbering Guide NTH Pin 1 Input Pin 3 Output Logic 1 or NC Oscillation Logic 0 or GND High Impedance Required Input Levels on Pin 1: Logic 1 = 2.0V min Logic 0 = 0.8V max or 0.2V max @ 3.3V Package Details, Type H SARONIX YYWW 2.0 .079 24.0000 MHz NTH06HC 1 Frequency Range 3 = 1.0 to 4 MHz 6 = 4+ to 24 MHz 8 = 24+ to 70 MHz 9.80 max .386 8.95 .352 6 C - 24.0000 (T ) (T) = Tape & Reel full reel increments only Frequency Supply Voltage Blank = 5V operation 3 = 3.3V operation Stability Tolerance C = ±100 ppm B = ±50 ppm Package Type H Example PN: NTH06HC - 24.0000 (T) Test Circuits 2 13.0 max .512 4.10 .161 4.7 max .185 RL = 390Ω 1 to 50 MHz RL = 780Ω 50+ to 70 MHz TEST POINT 0.51 .020 mA M 5.08 .200 Pin 4 0.15 .006 0.25 .010 7.62 .300 Pin Function: Pin 1: Tri-State Control Pin 2: GND H Series NTH = CMOS - compatible NTT = TTL - compatible (5V only) Symmetry 0 = 40/60% max, 0 to +70°C A = 45/55% max, 0 to +70°C 2 = 40/60% max, -40 to +85°C 4 = 45/55% max, -40 to +85°C, 50 MHz max 3 4 0 OUT V CC OSCILLATOR .01µF ( Note B ) VM POWER SUPPLY Pin 3 CL = 15pF ( Note A ) GND MMBD7000 or Equiv Pin 2 Pin 1 Pin 3: Output Pin 4: +5 VDC TRI-STATE INPUT Recommended Land Pattern NOTE: A. CL includes probe and fixture capacitance. NOTE: B. An external .01µF bypass capacitor close to package ground and VCC pin is required 1.78 .070 * 4 FIGURE 1 - TTL TEST CIRCUIT, 5V OPERATION TEST POINT mA M 3 Pin 4 7.80 .307 1 2 2.82 .111 POWER SUPPLY *External high frequency power supply decoupling required. Scale: None ( Dimensions in VM .01µF ( Note B ) Pin 1 5.08 .200 mm ) inches Pin 3 VCC CL = 50pF 1 to 50 MHz CL = 30pF 50+ to 70 MHz CL = 30pF 3.3V operation ( Note A ) OUT OSCILLATOR GND Pin 2 TRI-STATE INPUT NOTE: A. CL includes probe and fixture capacitance. NOTE: B. An external .01µF bypass capacitor close to package ground and VCC pin is required FIGURE 2 - HCMOS TEST CIRCUIT, 3.3V OR 5V OPERATION All specifications are subject to change without notice. DS-111 SaRonix REV K 141 Jefferson Drive • Menlo Park, CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894