CEL NX8562LF679-BA Necs cw ingaasp mqw dfb laser diode module for dwdm application (20 mw min) Datasheet

NEC's CW InGaAsP MQW DFB
LASER DIODE MODULE NX8562
FOR DWDM APPLICATIONS SERIES
(20 mW MIN)
FEATURES
DESCRIPTION
• AVAILABLE FOR DWDM WAVELENGTHS BASED ON
ITU-T RECOMMENDATIONS
(100 GHz grid) refer to the Ordering Information
• OUTPUT POWER:
Pf = 20 mW MIN
NEC's NX8562 Series are a 1550 nm Multiple Quatum Well
(MQW) Distributed Feed-Back (DFB) laser diode with Polarization Maintain Fiber (PMF). This device is designed as a
Continuous Wave (CW) light source and is ideal for optical
transmission systems in which external modulators are used.
• INTERNAL THERMOELECTRIC COOLER AND ISOLATOR
The device is available for Dense Wavelength Division Multiplexing (DWDM) wavelengths based on ITU-T recommendations, enabling a wide range of applications.
• HERMETICALLY SEALED 14-PIN BUTTERFLY PACKAGE
• POLARIZATION MAINTAIN FIBER PIGTAIL
ELECTRO-OPTICAL CHARACTERISTICS (TLD = 25°C, TC = -20
to +70°C)
PART NUMBER
SYMBOLS
TSET
VF
PARAMETERS AND CONDITIONS
NX8562 Series
UNITS
MIN
Laser Set Temperature
°C
20
TYP
MAX
Forward Voltage, Pf = 20 mW
V
1.2
1.5
35
IF
Forward Current, Pf = 20 mW
mA
120
167
ITH
Threshold Current
mA
20
40
Pf
Optical Output Power from Fiber,
IF = 167 mA, TLD = TSET
mW
20
λp
Peak Emission Wavelength1, Pf = 20 mW, CW,
TLD = TSET
nm
1527.99
ITU-T1
1611.78
∆v
Spectral Line Width, Pf = 10 mW, CW, 3 dB down
1
2
33
45
SMSR
RIN
ext
Side Mode Suppression Ratio, Pf = 20 mW, CW
Relative Intensity Noise, Pf = 20 mW, 20 MHz to 3 GHz
Polarization Extinction
Ratio2,
Pf = 20 mW, CW
MHz
dB
dB/Hz
dB
-150
20
Notes:
1. Available for DWDM based on ITU-T recommendations. please refer to Ordering Information.
2. Polarization state of LD is aligned parallel to the slow axis.
California Eastern Laboratories
NX8562 SERIES
ELECTRO-OPTICAL CHARACTERISTICS (Applicable to Monitor PD: TLD = 25°C, TC = -20
PART NUMBER
SYMBOLS
to +70°C)
NX8562 Series
UNITS
MIN
Im
Monitor Current, Pf = 20 mW, VR = 5 V
µA
100
ID
Dark Current, VR = 5 V
nA
10
γ1
Tracking Error, Im = const.
dB
0.5
Note:
1. γ = 10 log
PARAMETERS AND CONDITIONS
TYP
MAX
2000
Pf
20 mW
Pf
TLD = TC = 25°C
(mW)
TLD = 25°C, TC = -20 to +70°C
10
Pf
0
Im
Im
(at Pf (25°C) = 20 mW)
ELECTRO-OPTICAL CHARACTERISTICS (Applicable to Thermistor and TEC: TLD = 25°C, TC = -20
PART NUMBER
SYMBOLS
to +70°C)
NX8562 Series
PARAMETERS AND CONDITIONS
UNITS
MIN
TYP
kΩ
9.5
10.0
MAX
10.5
K
3350
3450
3550
R
Thermistor Resistance
B
B Constant
IC
Cooler Current, ∆T = 70 - Tset, Pf = 20 mW
A
1
VC
Cooler Voltage, ∆T = 70 - Tset, Pf = 20 mW
V
2
ABSOLUTE MAXIMUM RATINGS1
(TC = 25°C, unless otherwise specified)
SYMBOLS
UNITS
RATINGS
IF
Forward Current of LD
PARAMETERS
mA
300
VR
Reverse Voltage of LD
V
2.0
IF
Forward Current of PD
mA
10
VR
Reverse Voltage of PD
V
20
TC
Operating Case Temperature
°C
-20 to +70
TSTG
Storage Temperature
°C
-40 to +85
TSLD
Lead Soldering
Temperature (10 s)
°C
260
Note:
1. Operation in excess of any one of these parameters may result
in permanent damage.
NX8562 SERIES
TYPICAL PERFORMANCE CURVES (TC = TSET, unless otherwise specified)
OPTICAL OUTPUT POWER FROM FIBER
vs. FORWARD CURRENT
LONGITUDINAL MODE
Optical Output Power from Fiber, Pf (mW)
10
Relative Intensity (dB)
0
-10
-20
-30
-40
-50
-60
-70
1540
1550
30.0
25.0
20.0
15.0
10.0
5.0
0
1560
0
Wavelength λ (nm)
80
60
40
20
0
1.2
1.6
2.0
2.4
THERMISTOR RESISTANCE vs.
AMBIENT TEMPERATURE
Thermistor Resistance, R (kΩ)
50
30
20
10
5
3
2
1
25
160
200
50
Ambient Temperature, TA (°C)
24.0
20.0
16.0
12.0
8.0
4.0
0
0
0.2
0.8
1.2
1.6
Monitor Current, IM (mA)
Forward Voltage, VF (V)
0
Optical Output Power from Fiber, Pf (mW)
Forward Current, IF (mA)
100
0.8
120
OPTICAL OUTPUT POWER FROM FIBER
vs. MONITOR CURRENT
120
0.4
80
Forward Current, IF (mA)
FORWARD CURRENT vs.
FORWARD VOLTAGE
0
40
75
2.0
NX8562 SERIES
ORDERING INFORMATION
PART NUMBER
PACKAGE
NX8562-AZ*
14-Pin Butttterfly
NX8562
BA
With FC-PC Connector
Wavelength Code: Refer to Tables A and B
LB: Anode Ground
LF: Anode Floating
*NOTE:
Please refer to the last page of this data sheet, “Compliance with EU Directives” for Pb-Free RoHS Compliance Infomation.
TABLE A: DWDM Wavelength based on ITU-T Recommendations (@TLD = Tset)
Wavelength code
279
287
295
303
311
318
326
334
342
350
358
366
373
381
389
397
405
413
421
429
437
445
453
461
469
477
ITU-T1 Wavelength
(nm)
1527.99
1528.77
1529.55
1530.33
1531.11
1531.89
1532.68
1533.46
1534.25
1535.03
1535.82
1536.60
1537.39
1538.18
1538.97
1539.76
1540.55
1541.34
1542.14
1542.93
1543.73
1544.52
1545.32
1546.11
1546.91
1547.71
Frequency
(THz)
Wavelength code
196.20
196.10
196.00
195.90
195.80
195.70
195.60
195.50
195.40
195.30
195.20
195.10
195.00
194.90
194.80
194.70
194.60
194.50
194.40
194.30
194.20
194.10
194.00
193.90
193.80
193.70
Note:
1. The Value which omitted and computed the 3rd place below the decimal point.
485
493
501
509
517
525
533
541
549
557
565
573
581
589
597
606
614
622
630
638
646
654
663
671
679
687
ITU-T1 Wavelength
(nm)
Frequency
(THz)
1548.51
1549.31
1550.11
1550.91
1551.72
1552.52
1553.32
1554.13
1554.94
1555.74
1556.55
1557.36
1558.17
1558.98
1559.79
1560.60
1561.41
1562.23
1563.04
1563.86
1564.67
1565.49
1566.31
1567.13
1567.95
1568.77
193.60
193.50
193.40
193.30
193.20
193.10
193.00
192.90
192.80
192.70
192.60
192.50
192.40
192.30
192.20
192.10
192.00
191.90
191.80
191.70
191.60
191.50
191.40
191.30
191.20
191.10
NX8562 SERIES
TABLE B: DWDM Wavelength based on ITU-T Recommendations (@TLD = Tset)
Wavelength code
695
704
712
720
728
737
745
753
761
770
778
786
795
803
811
820
828
836
845
853
862
870
878
887
895
4904
ITU-T1 Wavelength
(nm)
1569.59
1570.41
1571.23
1572.06
1572.88
1573.71
1574.54
1575.36
1576.19
1577.02
1577.85
1578.68
1579.51
1580.35
1581.18
1582.01
1582.85
1583.69
1584.52
1585.36
1586.20
1587.04
1587.88
1588.72
1589.56
1590.41
Frequency
(THz)
Wavelength code
191.00
190.90
190.80
190.70
190.60
190.50
190.40
190.30
190.20
190.10
190.00
189.90
189.80
189.70
189.60
189.50
189.40
189.30
189.20
189.10
189.00
188.90
188.80
188.70
188.60
188.50
Note:
1. The Value which omitted and computed the 3rd place below the decimal point.
912
921
929
937
946
954
963
971
980
988
997
6006
6014
6023
6031
6040
6048
6057
6066
6074
6083
6091
6100
6109
6117
ITU-T1 Wavelength
(nm)
Frequency
(THz)
1591.25
1592.10
1592.94
1593.79
1594.64
1595.48
1596.33
1597.18
1598.04
1598.89
1599.74
1600.60
1601.45
1602.31
1603.16
1604.02
1604.88
1605.74
1606.60
1607.46
1608.32
1609.19
1610.05
1610.92
1611.78
188.40
188.30
188.20
188.10
188.00
187.90
187.80
187.70
187.60
187.50
187.40
187.30
187.20
187.10
187.00
186.90
186.80
186.70
186.60
186.50
186.40
186.30
186.20
186.10
186.00
NX8562 Series
OUTLINE DIMENSIONS (Units in mm)
15.24
NX8562LB
TOP VIEW
2.54
φ2.67 4 places
10 MIN 1.25
#7
20.8
7
1
0.9
+
Cooler
#1
PD
L
Thermistor
6.0
12.7±0.2
8.89±0.13
8
14
LD
R
#8
0.5
20.83±0.25
#14
PIN CONNECTIONS
26.04±0.25
PIN No.
1
2
3
4
5
6
7
Optical Fiber (PMF)
Length : 1000 MIN
1.0
0.3
8.2±0.2
5.4
5.15
29.97±0.25
FUNCTION
THERMISTOR
THERMISTOR
BIAS
PD ANODE
PD CATHODE,
COOLER ANODE
COOLER CATHODE
PIN No.
8
9
10
11
12
13
14
FUNCTION
GND
GND
GND
GND, LD ANODE
SIGNAL INPUT
GND
GND
PIN No.
8
9
10
11
12
13
14
FUNCTION
GND
GND
PD (λp) ANODE
LD ANODE
LD CATHODE
LD ANODE
NC
NX8562LF
TOP VIEW
#7
+
Cooler
#1
L
PD
Thermistor
LD
R
#8
#14
PIN CONNECTIONS
OPTICAL FIBER DIMENSIONS
Paramter
Outer Diameter
Minimum Fiber Bending Radius
Fiber Length
Unit
mm
mm
mm
PIN No.
1
2
3
4
5
6
7
(Units in mm)
Specification
0.9±0.1
30
1000 MIN
FUNCTION
THERMISTOR
THERMISTOR
LD Cathode
PD (Pf) ANODE
PD CATHODE
COOLER ANODE
COOLER CATHODE
PMF
FC-PC Connector
Fiber Length: 1000 mm MIN
Life Support Applications
These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected
to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify
CEL for all damages resulting from such improper use or sale.
04/02/2003
A Business Partner of NEC Compound Semiconductor Devices, Ltd.
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A
Not Detected
Lead (Pb)
< 1000 PPM
Mercury
< 1000 PPM
Not Detected
Cadmium
< 100 PPM
Not Detected
Hexavalent Chromium
< 1000 PPM
Not Detected
PBB
< 1000 PPM
Not Detected
PBDE
< 1000 PPM
Not Detected
-AZ
(*)
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.
Similar pages