OC-32 Series Lead-Free RoHS Compliant 3.2X2.5X1.2mm / SMD / HCMOS/TTL Oscillator PART NUMBERING GUIDE C A L I B E R Electronics Inc. Environmental/Mechanical Specifications on page F5 OC-32A- 100 48 A T - 30.000MHz Package OC-32 = 3.3Vdc OC-32A = 1.8Vdc OC-32B = 2.5Vdc Pin One Connection T = Tri State Enable High Output Symmetry Blank = 40/60%, A = 45/55% Operating Temperature Range Blank = -10°C to 70°C, 27 = -20°C to 70°C, 48 = -40°C to 85°C Inclusive Stability 100= +/-100ppm, 50= +/-50ppm, 30= +/-30ppm, 25= +/-25ppm, 20= +/-20ppm ELECTRICAL SPECIFICATIONS Revision: 2006-C Frequency Range 1.544MHz to 80.000MHz / 32.768kHz (@ 3.3V) Operating Temperature Range -10°C to 70°C / -20°C to 70°C / -40°C to 85°C Storage Temperature Range -55°C to 125°C A=1.8Vdc / B=2.5Vdc / BLANK=3.3Vdc ±10% Supply Voltage Input Current 1.544MHz to 32.000MHz and 32.768kHz 36,001MHz to 70.000MHz 70.001MHz to 125.000MHz 2mA Maximum 3mA Maximum 4mA Maximum (3.3v, 2.5v, 1.8v) (3.3v, 2.5v, 1.8v) (3.3v, 2.5v, 1.8v) Frequency Tolerance / Stability Inclusive of Operating Temperature Range, Supply Voltage and Load ±100ppm, ±50ppm, ±30ppm, ±25ppm, ±20ppm, (±50ppm for 32.768kHz only) Output Voltage Logic High (Voh) w/HCMOS or TTL Load 90% of Vdd Min. / Ioh=-8mA Output Voltage Logic Low (Vol) wHCMOS or TTL Load 10% of Vdd Max. / Iol=8mA Rise / Fall Time 10% to 90% of Waveform w/HCMOS Load; 0.4Vdc to 2.4V w/TTL Load / 6nSec Max. Duty Cycle @1.4Vdc w/TTL Load; @50% w/HCMOS Load @1.4Vdc w/TTL Load or w/HCMOS Load 50 ±10% (Standard) 50±5% (Optional) Load Drive Capability 15pF HCMOS Load Pin 1 Tristate Function Pin 1 = H or Open / Output Active at pin 3 Pin 1 = L / High Impedance at pin 3 Aging (@ 25°C) ±5ppm / year Maximum Start Up Time 10mSeconds Maximum Absolute Clock Jitter ±250pSeconds Maximum One Sigma Clock Jitter ±50pSeconds Maximum NOTE: A 0.01uF bypass capacitor should be placed between Vdd (Pin 4) and GND (Pin 2) to minimize power supply line noise. MECHANICAL DIMENSIONS Marking Guide Recommended Solder Pattern All Dimensions in mm. Metal 2.5 ± 0.15 0.95 0.9 ±0.2 X4 4 (X4 plcs.) 1.20 2.20 ±0.15 3.2 X4 ± 0.15 2.2 3 Ceramic 1.75 1.2 Max Pin 1: Tri-State Pin 2: Case Ground TEL 949-366-8700 FAX 949-366-8707 Line 1: A, B or Blank - Frequency Line 2: CEI YM 1 2 A = Voltage designator CEI = Caliber Electronics Inc. YM = Date Code (Year / Month) 1.00± 0.15 Pin 3: Output Pin 4: Supply Voltage (3.3v, 2.5v, 1.8v) WEB http://www.caliberelectronics.com