O PA OPA1 OPA 131 OPA2 31 2131 O PA OPA131 OPA2131 OPA4131 4131 OP A41 31 131 OPA4 131 SBOS040A – NOVEMBER 1994 – REVISED DECEMBER 2002 General-Purpose FET-INPUT OPERATIONAL AMPLIFIERS FEATURES ● FET INPUT: IB = 50pA max ● LOW OFFSET VOLTAGE: 750µV max OPA131 ● WIDE SUPPLY RANGE: ±4.5V to ±18V ● SLEW RATE: 10V/µs Offset Trim 1 8 NC –In 2 7 V+ +In 3 6 Output V– 4 5 Offset Trim 8 V+ 7 Out B 6 –In B 5 +In B ● WIDE BANDWIDTH: 4MHz ● EXCELLENT CAPACITIVE LOAD DRIVE ● SINGLE, DUAL, QUAD VERSIONS DIP-8, SO-8 DESCRIPTION The OPA131 series of FET-input op amps provides high performance at low cost. Single, dual, and quad versions in industry-standard pinouts allow cost-effective design options. OPA2131 Out A The OPA131 series offers excellent general-purpose performance, including low offset voltage, drift, and good dynamic characteristics. 1 –In A 2 +In A 3 V– 4 A B Single, dual, and quad versions are available in DIP and SO packages. Performance grades include commercial and industrial temperature ranges. DIP-8, SO-8 OPA4131 OPA4131 Out A 1 –In A 2 A 14 Out D Out A 1 13 –In D –In A 2 A D +In A 3 12 +In D V+ 4 11 V– +In B 5 10 +In C B 16 Out D 15 –In D D +In A 3 14 +In D V+ 4 13 V– +In B 5 12 +In C B C C –In B 6 9 –In C –In B 6 11 –In C Out B 7 8 Out C Out B 7 10 Out C NC 8 9 NC DIP-14, SO-14 NC = No Connection SOL-16 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright © 1994, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. www.ti.com ELECTROSTATIC DISCHARGE SENSITIVITY ABSOLUTE MAXIMUM RATINGS(1) Supply Voltage, V+ to V– .................................................................... 36V Input Voltage .................................................. (V–) – 0.7V to (V+) + 0.7V Output Short-Circuit(2) .............................................................. Continuous Operating Temperature .................................................. –55°C to +125°C Storage Temperature ..................................................... –55°C to +125°C Junction Temperature ...................................................................... 150°C Lead Temperature (soldering, 10s) ................................................. 300°C NOTES: (1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. (2) Short-circuit to ground, one amplifier per package. This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. PACKAGE/ORDERING INFORMATION PACKAGE-LEAD PACKAGE DESIGNATOR(1) SPECIFIED TEMPERATURE RANGE PACKAGE MARKING ORDERING NUMBER TRANSPORT MEDIA, QUANTITY Single OPA131 " OPA131 " OPA131 " SO-8 " SO-8 " SO-8 " D " D " D " –40°C to +85°C " –40°C to +85°C " –40°C to +85°C " OPA131UJ " OPA131UA " OPA131U " OPA131UJ OPA131UJ/2K5 OPA131UA OPA131UA/2K5 OPA131U OPA131U/2K5 Rails, 100 Tape and Reel, 2500 Rails, 100 Tape and Reel, 2500 Rails, 100 Tape and Reel, 2500 Dual OPA2131 " OPA2131 " SO-8 " SO-8 " D " D " –40°C to +85°C " –40°C to +85°C " OPA2131UJ " OPA2131UA " OPA2131UJ OPA2131UJ/2K5 OPA2131UA OPA2131UA/2K5 Rails, 100 Tape and Reel, 2500 Rails, 100 Tape and Reel, 2500 Quad OPA4131 " OPA4131 " OPA4131 " DIP-14 " SOL-16 " SOL-14 " N " DW " D " –40°C to +85°C " –40°C to +85°C " –40°C to +85°C " OPA4131PJ OPA4131PA OPA4131UA " OPA4131NJ OPA4131NA OPA4131PJ OPA4131PA OPA4131UA OPA4131UA/1K OPA4131NJ OPA4131NA Rails, 25 Rails, 25 Rails, 48 Tape and Reel, 1000 Rails, 58 Rails, 58 PRODUCT NOTE: (1) For the most current specifications and package information, refer to our web site at www.ti.com. 2 OPA131, 2131, 4131 www.ti.com SBOS040A ELECTRICAL CHARACTERISTICS At TA = +25°C, VS = ±15V, and RL = 2kΩ, unless otherwise noted. OPA131UA OPA2131UA OPA4131PA, UA, NA PARAMETER OFFSET VOLTAGE Input Offset Voltage OPA131U model only vs Temperature(1) vs Power Supply OPA131U model only INPUT BIAS CURRENT(2) Input Bias Current vs Temperature Input Offset Current CONDITION MIN TYP MAX UNITS ✻ ±1.5 ✻ ✻ ✻ ✻ mV mV µV/°C µV/V µV/V +5 ±50 See Typical Characteristic ±1 ±50 ✻ ✻ ✻ ✻ pA ✻ pA 21 16 15 15 3 ✻ ✻ ✻ ✻ ✻ Operating Temperature Range VS = ±4.5V to ±18V VCM = 0V VCM = 0V NOISE Input Voltage Noise Noise Density, f = 10Hz f = 100Hz f = 1kHz f = 10kHz Current Noise Density, f = 1kHz INPUT VOLTAGE RANGE Common-Mode Voltage Range Common-Mode Rejection OPA131U model only INPUT IMPEDANCE Differential Common-Mode OPEN-LOOP GAIN Open-Loop Voltage Gain OPA131U model only FREQUENCY RESPONSE Gain-Bandwidth Product Slew Rate Settling Time 0.1% 0.01% Total Harmonic Distortion + Noise VCM = –12V to +14V VO = –12V to +12V MAX ±0.2 ±0.2 ±2 50 50 ±1 0.75 ±10 200 100 (V+) – 1 80 86 94 100 ✻ ✻ ✻ 110 110 4 10 1.5 2 0.0008 G = –1, 10V Step, CL = 100pF G = –1, 10V Step, CL = 100pF 1kHz, G = 1, VO = 3.5Vrms ✻ ✻ (V+) – 3 (V+) – 2.5 (V–) + 3 (V–) + 2.5 ±25 ±4.5 IO = 0 TEMPERATURE RANGE Operating Range Storage Thermal Resistance, θJA DIP-8 SO-8 DIP-14 SO-14, SOL-16 MIN 1010 || 1 1012 || 3 VCM = 0V OUTPUT Voltage Output, Positive Negative Short-Circuit Current POWER SUPPLY Specified Operating Voltage Operating Voltage Range Quiescent Current (per amplifier) (V–) + 3 70 80 TYP OPA131UJ OPA2131UJ OPA4131PJ, NJ ±15 ±1.5 –55 –55 100 150 80 110 nV/√Hz nV/√Hz nV/√Hz nV/√Hz fA/√Hz ✻ ✻ V dB dB ✻ ✻ Ω || pF Ω || pF ✻ dB dB ✻ ✻ ✻ ✻ ✻ MHz V/µs µs µs % ✻ ✻ ✻ V V mA ✻ ±18 ±1.75 ✻ +125 +125 –55 ✻ ✻ ✻ ✻ ✻ ✻ ✻ ±2 V V mA +125 ✻ °C °C °C/W °C/W °C/W °C/W ✻ Specifications same as OPA131UA. NOTES: (1) Ensured by wafer test. (2) High-speed test at TJ = 25°C. OPA131, 2131, 4131 SBOS040A www.ti.com 3 TYPICAL CHARACTERISTICS At TA = +25°C, VS = ±15V, and RL = 2kΩ, unless otherwise noted. POWER SUPPLY AND COMMON-MODE REJECTION vs FREQUENCY OPEN-LOOP GAIN/PHASE vs FREQUENCY 100 80 ∅ –90 60 40 –135 20 Phase Shift (°) Voltage Gain (dB) –45 G –180 0 Power Supply Rejection (dB) 120 –20 120 100 80 80 –PSR 60 CMR 40 40 20 20 10 100 1k 10k 100k 1M 0 10 10M 100 1k Frequency (Hz) 10 10 Channel Separation (dB) Voltage Noise RL = ∞ 140 120 Dual and quad devices. G = 1, all channels. Quad measured channel A to D or B to C—other combinations yield improved rejection. 100 Current Noise 1 1 100 1k 1M 160 Current Noise (fA/√Hz) Voltage Noise (nV/√Hz) 100 100 10 100k CHANNEL SEPARATION vs FREQUENCY 1k 1k 1 10k Frequency (Hz) INPUT VOLTAGE AND CURRENT NOISE SPECTRAL DENSITY vs FREQUENCY 10k 100k RL = 2kΩ 80 10 1M 100 1k 10k 100k Frequency (Hz) Frequency (Hz) INPUT BIAS AND INPUT OFFSET CURRENT vs TEMPERATURE INPUT BIAS CURRENT vs INPUT COMMON-MODE VOLTAGE 1k 10k Input bias current is a function of the voltage between the V– supply and the inputs. 1k Input Bias Current (pA) Input Bias and Input Offset Current (pA) 60 0 1 VCM = 0V 100 IB IOS 10 1 100 VS = ±15V 10 0.1 VS = ±5V 0.01 –75 –50 –25 0 25 50 75 100 125 1 –15 –10 –5 0 5 10 15 Common-Mode Voltage (V) Ambient Temperature (°C) 4 100 +PSR OPA131, 2131, 4131 www.ti.com SBOS040A Common-Mode Rejection (dB) 0 120 TYPICAL CHARACTERISTICS (Cont.) At TA = +25°C, VS = ±15V, and RL = 2kΩ, unless otherwise noted. QUIESCENT CURRENT AND SHORT-CIRCUIT CURRENT vs TEMPERATURE 1.8 120 40 IQ VS = ±15V Quiescent Current (mA) Voltage Gain (dB) ISC– 115 110 105 30 ISC+ 1.4 20 IQ VS = ±5V 1.2 10 1 100 –75 –50 –25 0 25 50 75 100 0 –75 125 –50 –25 0 25 50 75 Ambient Temperature (°C) Temperature (°C) OFFSET VOLTAGE PRODUCTION DISTRIBUTION OFFSET VOLTAGE DRIFT PRODUCTION DISTRIBUTION 100 125 35 20 Typical production distribution of packaged units. Single, Typical production distribution of packaged units. Single, 30 dual and quad units included. 15 dual and quad units included. 25 Units (%) Units (%) 1.6 10 20 15 10 5 5 0 1400 1200 800 1000 600 400 0 200 –200 –400 –600 –800 –1000 –1200 –1400 0 –7 –6 –5 –4 –3 –2 –1 0 1 2 3 4 5 6 7 Offset Voltage Drift (µV/°C) Offset Voltage (µV) MAXIMUM OUTPUT VOLTAGE vs FREQUENCY TOTAL HARMONIC DISTORTION + NOISE vs FREQUENCY 30 1 Output Voltage (Vp-p) VO = 3.5Vrms 0.1 THD + Noise (%) VS = ±15V BandwidthLimited G = 100V/V 0.01 G = 10V/V 0.001 Maximum output voltage without slew-rate induced distortion. 20 10 VS = ±5V G = 1V/V 0 0.0001 10 100 1k 10k 100k OPA131, 2131, 4131 SBOS040A 10k 100k 1M 10M Frequency (Hz) Frequency (Hz) www.ti.com 5 Short-Circuit Current (mA) OPEN-LOOP GAIN vs TEMPERATURE TYPICAL CHARACTERISTICS (Cont.) At TCASE = +25°C, VS = ±15V, and RL = 2kΩ, unless otherwise noted. LARGE-SIGNAL STEP RESPONSE G = 1, CL = 300pF 5V/div 50mV/div SMALL-SIGNAL STEP RESPONSE G =1, CL = 300pF 1µs/div 200ns/div SMALL-SIGNAL OVERSHOOT vs LOAD CAPACITANCE SETTLING TIME vs CLOSED-LOOP GAIN 100 50 40 Overshoot (%) Settling Time (µs) VO = 10V Step RL = 2kΩ CL = 100pF 10 0.01% 0.1% G = +2 G = –1 30 G = ±10 20 G=1 10 1 –1 RL = 2kΩ Higher RL value generally reduces overshoot. –10 –100 0 100pF –1000 1nF Closed-Loop Gain (V/V) 10nF Load Capacitance OUTPUT VOLTAGE SWING vs OUTPUT CURRENT 15 VIN = 15V Output Voltage Swing (V) 14 13 25°C –55°C 12 11 125°C 10 –10 25°C 125°C –11 –12 –55°C –13 –14 VIN = –15V –15 0 5 10 15 20 25 30 Output Current (mA) 6 OPA131, 2131, 4131 www.ti.com SBOS040A APPLICATIONS INFORMATION V+ The OPA131 series op amps are unity-gain stable and suitable for a wide range of general-purpose applications. Power-supply pins should be bypassed with 10nF ceramic capacitors or larger. OPA131 (Single op amp only) 7 2 6 3 OPA131 5 The OPA131 series op amps are free from unexpected output phase-reversal common with FET op amps. Many FET-input op amps exhibit phase-reversal of the output when the input common-mode voltage range is exceeded. This can occur in voltage-follower circuits, causing serious problems in control-loop applications. All circuitry is completely independent in dual and quad versions, assuring normal behavior when one amplifier in a package is overdriven or shortcircuited. FIGURE 1. OPA131 Offset Voltage Trim Circuit. OFFSET VOLTAGE TRIM INPUT BIAS CURRENT The OPA131 (single op amp version) provides offset voltage trim connections on pins 1 and 5. Offset voltage can be adjusted by connecting a potentiometer as shown in Figure 1. This adjustment should be used only to null the offset of the op amp, not system offset or offset produced by the signal source. 1 4 Trim Range: ±20mV typ V– The input bias current is approximately 5pA at room temperature and increases with temperature as shown in the typical characteristic “Input Bias Current vs Temperature.” Input bias current also varies with common-mode voltage and power supply voltage. This variation is dependent on the voltage between the negative power supply and the common-mode input voltage. The effect is shown in the typical curve “Input Bias Current vs Common-Mode Voltage.” OPA131, 2131, 4131 SBOS040A 100kΩ www.ti.com 7 PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (°C) Top-Side Markings (3) (4) OPA131P OBSOLETE PDIP P 8 TBD Call TI Call TI OPA131PA OBSOLETE PDIP P 8 TBD Call TI Call TI OPA131PJ OBSOLETE PDIP P 8 TBD Call TI Call TI OPA131U ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR OPA 131U OPA131UA ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR OPA 131U A OPA131UA/2K5 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR OPA 131U A OPA131UA/2K5E4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR OPA 131U A OPA131UAE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR OPA 131U A OPA131UG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR OPA 131U OPA131UJ ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR OPA 131UJ OPA131UJ/2K5 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR OPA 131UJ OPA131UJ/2K5E4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR OPA 131UJ OPA131UJE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR OPA 131UJ OPA2131PA OBSOLETE PDIP P 8 TBD Call TI Call TI OPA2131PJ OBSOLETE PDIP P 8 TBD Call TI Call TI OPA2131UA ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR -55 to 125 OPA 2131UA OPA2131UA/2K5 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR -55 to 125 OPA 2131UA Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (°C) Top-Side Markings (3) (4) OPA2131UA/2K5E4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR -55 to 125 OPA 2131UA OPA2131UA/2K5G4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR -55 to 125 OPA 2131UA OPA2131UAE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR -55 to 125 OPA 2131UA OPA2131UAG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR -55 to 125 OPA 2131UA OPA2131UJ ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR OPA 2131UJ OPA2131UJ/2K5 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR OPA 2131UJ OPA2131UJ/2K5G4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR OPA 2131UJ OPA2131UJG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR OPA 2131UJ OPA4131NA ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR OPA4131NA OPA4131NAG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR OPA4131NA OPA4131NJ ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR OPA4131NJ OPA4131NJG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR OPA4131NJ OPA4131PA ACTIVE PDIP N 14 25 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type OPA4131PA OPA4131PAG4 ACTIVE PDIP N 14 25 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type OPA4131PA OPA4131PJ ACTIVE PDIP N 14 25 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type OPA4131PJ OPA4131PJG4 ACTIVE PDIP N 14 25 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type OPA4131PJ OPA4131UA ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR OPA4131UA OPA4131UA/1K ACTIVE SOIC DW 16 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR OPA4131UA Addendum-Page 2 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 11-Apr-2013 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (°C) Top-Side Markings (3) (4) OPA4131UA/1KG4 ACTIVE SOIC DW 16 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR OPA4131UA OPA4131UAG4 ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR OPA4131UA (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Top-Side Marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 3 Samples PACKAGE MATERIALS INFORMATION www.ti.com 9-Sep-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant OPA131UA/2K5 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 OPA131UJ/2K5 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 OPA2131UA/2K5 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 OPA2131UJ/2K5 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 OPA4131UA/1K SOIC DW 16 1000 330.0 16.4 10.75 10.7 2.7 12.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 9-Sep-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) OPA131UA/2K5 SOIC D 8 2500 367.0 367.0 35.0 OPA131UJ/2K5 SOIC D 8 2500 367.0 367.0 35.0 OPA2131UA/2K5 SOIC D 8 2500 367.0 367.0 35.0 OPA2131UJ/2K5 SOIC D 8 2500 367.0 367.0 35.0 OPA4131UA/1K SOIC DW 16 1000 367.0 367.0 38.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2013, Texas Instruments Incorporated