OPTEK OPA729YD 10 watt light bar on anotherm linear heat spreader Datasheet

OPA729 Series
10 Watt Light Bar on
Anotherm Linear Heat Spreader
OPA729 Series
•
•
•
•
•
•
10, 1 watt LEDs per strip, can be linked with other OPA729’s
Mono-color per strip (Blue, Green, Red, Yellow, White)
Two component beam angle options (120° or 40°)
Power connected to either end
Universal connector (Tyco 2-292173-2 mates with 173977-2)
RoHS Compliant
OPA729_ (120° Beam Angle)
Product Photo Here
OPA729_D (40° Beam Angle)
The OPA729 Series are designed for areas where lighting intensity and reliability
are essential. The light beam angles of 40° and 120° are ideal for illuminating small and medium size areas while
requiring minimal space. A patented substrate is used to ensure the best heat dissipation of any light assembly in
the industry.
For custom colors and design contact your OPTEK representative.
Electrical / Optical Characteristics: TA=25°C, IF=700mA
Part Number
Typical Forward Voltage (V)
Luminous Flux (lm)
OPA729Y
12.5
OPA729B
Color
Dominant Wavelength
350
Yellow
587 nm
18.0
90
Blue
470 nm
OPA729G
18.0
480
Green
530 nm
OPA729R
12.5
260
Red
625 nm
OPA729W
18.0
480
White
6,500°K
OPA729YD
12.5
350
Yellow
587 nm
OPA729BD
18.0
90
Blue
470 nm
OPA729GD
18.0
480
Green
530 nm
OPA729RD
12.5
260
Red
625 nm
OPA729WD
18.0
480
White
6,500°K
120°
40°
See OVSP_BCR4 for component specifications
See OVSP_4CR44 for component specifications
OPA729_
OPA729_D
+ Voltage
RoHS
Beam Angle
Ground
DO NOT LOOK DIRECTLY AT LED WITH
UNSHIELDED EYES OR DAMAGE TO RETINA
MAY OCCUR.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A
04/06
Page 1 of 1
Similar pages