OPT-1250xxxx Series RoHS Compliant 1X9 SC Duplex Receptacle Transceiver Module for Gigabit Ethernet Features Industry Standard 1 x 9 Footprint and duplex SC Connector interface Compliant with Specifications for IEEE 802.3z Gigabit Ethernet OPT-1250Bxxx compliant with the 1.0625GBd Fibre Channel 100-SM-LC-L FC-PI Rev.13 OPT-1250Axxx compliant with the 1.0625GBd Fibre Channel FC-PI 100-M5-SN-I Rev.13 Single +3.3V or 5V Power Supply PECL or TTL Receiver Signal Detect Indicator Wave Solderable and Aqueous Washable Laser Class 1 Product which comply with the requirements of IEC 60825-1 and IEC 60825-2 Description Applications The OPT-1250xxxx series from DELTA is a 1X9 transceiver module designed expressly for high-speed communication applications that require rates of up to 1.25Gbit/sec. It is compliant with the Gigabit Ethernet standards as well as 1x Fiber channel standards. Gigabit Ethernet/Fast Ethernet Switched backplane applications Performance The OPT-1250xxxx transceivers are provided with the SC receptacle that is compatible with the industry standard SC connector. OPT-1250AxFxx: 850nm VCSEL, up to 500m in 50/125μm MMF The post-amplifier of the OPT-1250xxxx also includes a Signal Detect circuit that provides a PECL or TTL logic-Low output when an unusable optical signal level is detected. (see order information) 850nm VCSEL, up to 220m in 62.5/125μm MMF OPT-1250B2I1x: 1310nm FP laser, Data Link up to 5km in 9/125um SMF The OPT-1250xxxx transceiver is a Class 1 eye safety product. The optical power levels, under normal operation, are at eye safe level. OPT-1250BxQxx: 1310nm FP laser, Data Link up to 10km in 9/125um SMF 1310nm FP laser, up to 550m in 50/125μm MMF 1310nm FP laser, up to 550m in 62.5/125μm MMF 1 DELTA ELECTRONICS, INC. Sep., 2006 Rev. 0G www.deltaww.com OPT-1250xxxx Series Absolute Maximum Ratings Parameter Storage Temperature Lead Soldering Temperature Lead Soldering Time Supply Voltage Symbol Ts TSOLD tSOLD VCC Min. -40 Typ. Max. 85 260 10 6 Unit ºC ºC sec. V Note Typ. Max. 70 Unit ºC Note 1 5.25 3.465 V 0 Recommended Operating Conditions Parameter Ambient Operating Temperature Supply Voltage OPT-1250x1xx OPT-1250x2xx, OPT-1250x4xx Symbol TA Min. 0 VCC 4.75 3.135 Note: See ordering information for detail Electrical Characteristics (At recommended ambient operating temperature, TA and supply voltage, VCC) Parameter Total Supply Current Transmitter Transmitter Data Input Voltage-Low Transmitter Data Input Voltage-High Transmitter Differential Input Voltage Receiver Data Output Voltage-Low Data Output Voltage-High Receiver Differential Output Voltage Output Data Rise/Fall Time PECL SD Output LOW level output voltage HIGH level output voltage TTL SD Output LOW level output voltage HIGH level output voltage Symbol ICCT Min. VIL-VCC VIH-VCC VDT Typ. Max. 300 Unit mA Note -1.810 -1.165 0.3 -1.475 -0.880 1.6 V V V 1 1 2 VOL-VCC VOH-VCC VDR tr/tf -1.95 -1.045 0.5 -1.62 -0.74 1.2 0.4 V V V ns 1 1 2 3 VSDH-VCC VSDL-VCC -1.84 -1.1 -1.60 -0.9 V 4 VSDH VSDL 2 0 VCC 0.8 V 5 0.7 Notes: 1. For OPT-1250A1F1x, OPT-1250A4F1x, OPT-1250B2I1x, OPT-1250B2Q1x and OPT-1250B1Q1x. 2. For OPT-1250A2F2x and OPT-1250B4Q2x. 3. These are 20%~80% values 4. For OPT-1250A1F1x, OPT-1250A2F2x, OPT-1250B2I1x, OPT-1250B1Q1x and OPT-1250B2Q1x 5. For OPT-1250A4F1x and OPT-1250B4Q2x 2 DELTA ELECTRONICS, INC. Sep., 2006 Rev. 0G www.deltaww.com OPT-1250xxxx Series Single Mode Transceiver (OPT-1250B2I1x, OPT-1250B1Q1x, OPT-1250B2Q1x, OPT-1250B4Q2x) (At recommended ambient operating temperature, TA and supply voltage, VCC; Data Rate=1.25Gb/sec, PRBS=27-1 NRZ, 9/125um SMF) Parameter Symbol Min. PO -12 -9.5 9 1270 Typ. Max. Unit -3 -3 dBm Note Transmitter Output Optical Power (Avg.) OPT-1250BxIx OPT-1250BxQx Optical Extinction Ratio Center Wavelength Spectral Width (RMS) Optical Rise/Fall time Relative Intensity Noise Output Eye ER dB λC 1310 1355 nm σ 2.8 nm 0.26 ns 1 tr/tf RIN -120 dB/Hz Complies with the IEEE 802.3z/D2 specification, and is class 1 laser eye safety Receiver Sensitivity (Avg.) Input Optical Wavelength Signal Detect-Asserted (Avg.) Signal Detect-De-asserted (Avg.) Signal Detect-Hysteresis Receiver saturation power PIN λ PA PD PA-PD PSAT -19 1310 -19 -35 0.5 -3 dBm nm dBm dBm dB dBm 2 Notes: 6. These are 20%~80% values 7. The sensitivity is provided at a BER of 1×10-10 or better with an input signal consisting of 1250Mb/s, 27-1 PRBS. Mask of the eye diagram for the optical transmit signal 3 DELTA ELECTRONICS, INC. Sep., 2006 Rev. 0G www.deltaww.com OPT-1250xxxx Series Multi-Mode Series Transceiver (OPT-1250A1F1x, OPT-1250A2F2x, OPT-1250A4F1x) (At recommended ambient operating temperature, TA and supply voltage, VCC; Data Rate=1.25Gb/sec, PRBS=27-1 NRZ, 62.5/125um MMF) Parameter Symbol Min. Typ. Max. Unit Note Transmitter Output Optical Power (Avg.) Optical Extinction Ratio Center Wavelength Spectral Width (RMS) Optical Rise/Fall time Relative Intensity Noise Output Eye PO -9.5 -4 dBm ER 9 dB λC 830 850 860 nm σ 0.85 nm 0.26 ns 1 tr/tf RIN -117 dB/Hz Complies with the IEEE 802.3z/D2 specification, and is class 1 laser eye safety Receiver Sensitivity (Avg.) Input Optical Wavelength Signal Detect-Asserted (Avg.) Signal Detect-De-asserted (Avg.) Signal Detect-Hysteresis Receiver saturation power PIN λ PA PD PA-PD PSAT -17 850 -17 -30 0.5 -4 dBm nm dBm dBm dB dBm 2 Notes: 8. These are 20%~80% values 9. The sensitivity is provided at a BER of 1×10-10 or better with an input signal consisting of 1250Mb/s, 27-1 PRBS. Mask of the eye diagram for the optical transmit signal 4 DELTA ELECTRONICS, INC. Sep., 2006 Rev. 0G www.deltaww.com OPT-1250xxxx Series Pin Out Table PIN 1 2 3 4 5 6 7 8 9 Symbol GND RD (+) RD (-) SD VccR VccT TD (-) TD (+) GND Functional description Receiver Signal Ground Receiver Data Out (LVPECL) Receiver Data Out Bar (LVPECL) Receiver Signal Detect (LVPECL or TTL) Receiver Power Supply, Transmitter Power Supply Transmitter Data In Bar (LVPECL) Transmitter Data In (LVPECL) Transmitter Signal Ground Pin Descriptions: Pin 1 Receiver Signal Ground, GND Directly connect these pins to the ground plane. Pin 2 Receiver Data Out (LVPECL), RD (+) Receiver Data output (LVPECL), RD (+). Pin 3 Receiver Data Out Bar (LVPECL), RD (-) Receiver Data output (LVPECL), RD (-). Pin 4 Receiver Signal Detect (LVPECL/TTL), SD PECL/TTL logic family. Normal Operation: Logic “1” Output Fault Condition: Logic”0” Output. Pin 5 Receiver Power Supply, VccR Provide +3.3/5V dc power supply. Pin 6 Transmitter Power Supply, VccT Provide +3.3/5V dc power supply. Pin 7 Transmitter Data In Bar (LVPECL), TD (-) Transmitter Data Input (LVPECL), TD (-) Pin 8 Transmitter Data In (LVPECL), TD (+) Transmitter Data Input (LVPECL), TD (+) Pin 9 Transmitter Signal Ground, GND Directly connect these pins to the ground plane. 5 DELTA ELECTRONICS, INC. Sep., 2006 Rev. 0G www.deltaww.com OPT-1250xxxx Series Recommend Circuit Schematic for Internal DC Coupled Transceivers TX-VCC 9 R1 TD+ TD- 8 7 6 5 4 3 2 1 R3 C1 TX-GND RX-GND C3 C2 C4 RDSD TX-VCC RX-VCC R2 RD+ R4 R5 R6 R7 Transceiver Top Niew Test Equipment L1 R1=R3=82 Ohm (3.3V), 68 Ohm (5V) TX-VCC R2=R4=130 Ohm (3.3V), 191 Ohm (5V) VCC C5 C6 C7 C8 C9 R5=270 Ohm (3.3V, PECL), 510 Ohm (5V, PECL) L2 NC (TTL) RX-VCC R6=R7=274 Ohm (5V) C1=C2=C3=C4=C6=C8=100 nF C5=100 uF C7=C9=10 uF L1=L2=1 uH or ferrite inductor Recommend Circuit Schematic for Internal AC Coupled Transceivers 9 TD+ TD- 8 7 6 5 4 3 2 1 C1 C3 C4 C2 TX-VCC RD+ RDSD RX-VCC R1 Transceiver Top View Test Equipment R1=270 Ohm(3.3V, PECL), 510 Ohm (5V, PECL) NC(TTL) C1=C2=C3=C4=C6=C8=100 nF L1 TX-VCC VCC C5 C6 C7 C8 C9 C5=100 uF L2 C7=C9=10 uF RX-VCC L1=L2=1 uH or ferrite inductor 6 DELTA ELECTRONICS, INC. Sep., 2006 Rev. 0G www.deltaww.com OPT-1250xxxx Series Package Outline Drawing (without shielding) Package Outline Drawing (A type shielding) 7 DELTA ELECTRONICS, INC. Sep., 2006 Rev. 0G www.deltaww.com OPT-1250xxxx Series Package Outline Drawing (B type shielding) Package Outline Drawing (C type shielding) 8 DELTA ELECTRONICS, INC. Sep., 2006 Rev. 0G www.deltaww.com OPT-1250xxxx Series Regulatory Compliance Feature Electromagnetic Interference (EMI) Reference Performance FCC Class B EN 55022 Class B (CISPR 22A) Radio Frequency Electromagnetic Field EN 61000-4-3 (1) Satisfied with electrical characteristics of product spec. IEC 1000-4-3 Electrostatic Discharge to the Duplex LC Receptacle EN 61000-4-2 (2) No physical damage IEC 1000-4-2 IEC 801.2 Electrostatic Discharge to the Electrical Pins MIL-STD-883E Method 3015.7 Eye Safety US FDA CDRH AEL Class 1 CDRH File # 0321539-00 EN 60950: 2000 EN 60825-1: 1994+A11+A2 EN 60825-2: 2000 TUV Certificate No. R50032471 Component Recognition Underwriters Laboratories and UL File # E239394 Canadian Standards Association Joint Component Recognition for Information Technology Equipment Including Electrical Business Equipment 9 DELTA ELECTRONICS, INC. Sep., 2006 Rev. 0G www.deltaww.com OPT-1250xxxx Series Ordering information OPT- 1250X1X2X3X4X5X6X7 X1: Fiber X5: A: Multi-mode 850nm B: Single-mode 1310nm X2: Power Supply Voltage and SD Level X6: 1: 5.0V, PECL SD Level 2: 3.3V, PECL SD Level 4: 3.3V, TTL SD Level Shielding Type Blank: Plastic housing A: A type shielding B: B type shielding C: C type shielding X7: X3: Distance Temperature Blank: 0 to +70 degree C H: -10 to + 85 degree C F: 500m, 50/125μm MMF I: 5km, 9/125μm SMF Q: 10km, 9/125μm SMF X4: RoHS Compliant Blank: Non-RoHS Compliant R: RoHS Compliant Data Coupling 1: 1x9SC DC/DC 2: 1x9SC AC/AC 10 DELTA ELECTRONICS, INC. Sep., 2006 Rev. 0G www.deltaww.com