2SC5343M NPN Silicon Transistor Description PIN Connection • General small signal amplifier Features B C E • Low collector saturation voltage : VCE(sat)=0.25V(Max.) • Low output capacitance : Cob=2pF(Typ.) • Complementary pair with 2SA1980M TO-92M Ordering Information Type NO. Marking 2SC5343M 5343 Package Code TO-92M Absolute maximum ratings Ta=25°C Characteristic Symbol Ratings Unit Collector-Base voltage VCBO 60 V Collector-Emitter voltage VCEO 50 V Emitter-Base voltage VEBO 5 V Collector current IC 150 mA Collector dissipation PC 400 mW Junction temperature Tj 150 °C Storage temperature Tstg -55~150 °C Electrical Characteristics Characteristic Ta=25°C Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=100μA, IE=0 60 - - V Collector-Emitter breakdown voltage BVCEO IC=1mA, IB=0 50 - - V Emitter-Base breakdown voltage BVEBO IE=10μA, IC=0 5 - - V Collector cut-off current ICBO VCB=60V, IE=0 - - 0.1 μA Emitter cut-off current IEBO VEB=5V, IC=0 - - 0.1 μA 70 - 700 - - - 0.25 V 80 - - MHz DC current gain Collector-Emitter saturation voltage Transistion frequency Collector output capacitance Noise figure * hFE VCE(sat) fT VCE=6V, IC=2mA IC=100mA, IB=10mA VCE=10V, IC=1mA Cob VCB=10V, IE=0, f=1MHz - 2 3.5 pF NF VCE=6V, IC=0.1mA, f=1KHz, Rg=10KΩ - - 10 dB * : hFE rank / O : 70 ~ 140, Y : 120 ~ 240, G : 200 ~ 400, L : 300 ~ 700 KSD-T0B002-000 1 2SC5343M Electrical Characteristic Curves Fig. 2 IC -VBE Fig. 1 PC –Ta Fig. 3 IC -VCE Fig. 4 hFE -IC Fig. 5 VCE(sat) -IC KSD-T0B002-000 2 2SC5343M Outline Dimension KSD-T0B002-000 3 2SC5343M The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T0B002-000 4