Spec. No. : C517M3 Issued Date : 2003.04.02 Revised Date : . . Page No. : 1/4 CYStech Electronics Corp. Low Current Positive Voltage Regulator PL78L08XM3 SOT-89 Description The PL78L08XM3 series of surface mount regulators are easy-to-use devices suitable for multitude of applications that require a regulated supply of up to 100mA. These regulators feature internal current limiting and thermal shutdown, making them remarkably rugged. No external components are required with the PL78L08XM3 devices in many applications. These devices offer a substantial performance advantage over the traditional zener diode resistor combination, as output impedance and quiescent current are substantially reduced. Features: • Wide Range Of Available, Fixed Output Voltages • Internal Short-Circuit Current Limiting • Internal Thermal Overload Protection • No External Components Required Absolute Maximum Ratings (Ta=25°C) • Input Voltage ....................................................................................................................... 30 V • Total Power Dissipation .................................................................................... Internally limited • Operating Temperature Range .......................................................................... 0 °C to +125 °C • Maximum Junction Temperature ..................................................................................... 125 °C • Storage Temperature Range .......................................................................... -55 °C to +150 °C • Lead Temperature (Soldering 10S) ................................................................................. 260 °C Schematic Diagram Typical Application Vin Vout PL78L08 3 Vin 1 5K 5.7K 2 100 100 C1 C2 Note : C1 and C2 are required if regulator is located far from power supply filter and load, or oscillation may induced on the loop. PL78L08M3 1.9K Vout 5pF 3.41K A common ground is required between the input and the output voltages. The input voltage must remain typically 2.0V above the output voltage even during the low point on the input ripple voltage. 1.5K 576 13K 3.89K 2.23K 7.8K 2.84K GND CYStek Product Specification Spec. No. : C517M3 Issued Date : 2003.04.02 Revised Date : . . Page No. : 2/4 CYStech Electronics Corp. Electrical Characteristics Vin=14V, Io=40mA, Tj=25°C Cin=0.33uF, Cout=0.1uF (unless otherwise noted) Symbol Vo Parameter Output Voltage ∆Vo Line Regulation ∆Vo Load Regulation IQ Quiescent Current Quiescent Current ∆IQ Change Vn Output Noise Voltage ∆Vin / ∆Vout Ripple Rejection Peak Output / Short Isc -Circuit Current VD Dropout Voltage Symbol Vo Output Voltage Line Regulation ∆Vo Load Regulation Quiescent Current Quiescent Current ∆IQ Change Vn Output Noise Voltage ∆Vin / ∆Vout Ripple Rejection Peak Output / Short Isc -Circuit Current VD Dropout Voltage PL78L08M3 Tj=25°C 10.5V≤Vin≤23V 1mA≤Io≤40mA 1mA≤Io≤70mA Tj=25°C, 10.5V≤Vin≤23V Tj=25°C, 11V≤Vin≤23V Tj=25°C, 1mA≤Io≤40mA Tj=25°C, 1mA≤Io≤100mA Tj=25°C 1mA≤Io≤40mA 11V≤Vin≤23V Ta=25°C, 10Hz≤f≤10KHz 11V≤Vin≤21V, f=120Hz PL78L08A Min Typ Max 7.76 8 8.24 Units V 7.76 8 8.24 7.76 39 8 80 70 8 15 2 60 45 8.24 175 125 40 80 5.5 0.1 1.5 - Tj=25°C - 140 - mA Tj=25°C - 1.7 - V Parameter ∆Vo IQ Conditions Conditions Tj=25°C 10.5V≤Vin≤23V 1mA≤Io≤40mA 1mA≤Io≤70mA Tj=25°C, 10.5V≤Vin≤23V Tj=25°C, 11V≤Vin≤23V Tj=25°C, 1mA≤Io≤40mA Tj=25°C, 1mA≤Io≤100mA Tj=25°C 1mA≤Io≤40mA 11V≤Vin≤23V Ta=25°C, 10Hz≤f≤10KHz 11V≤Vin≤21V, f=120Hz PL78L08B Min Typ Max 7.7 8 8.3 mV mV mA mA uV dB Units V 7.6 8 8.4 7.6 39 8 60 45 8.4 175 125 40 80 5.5 0.1 1.5 - Tj=25°C - 140 - mA Tj=25°C - 1.7 - V mV mV mA mA uV dB CYStek Product Specification Spec. No. : C517M3 Issued Date : 2003.04.02 Revised Date : . . Page No. : 3/4 CYStech Electronics Corp. Characteristic Curves Dropout Characteristics Maximum Average Power Dissipation 10000 5 4 Power Dissipation (mW) Output Voltage(V) 6 Io=1mA 3 Io=40mA 2 1000 Io=100mA 100 1 0 1 2 3 4 5 6 7 8 25 9 10 50 75 100 125 150 Ambient Temperature (°C) Input Voltage(V) Quiescent Current Quiescent Current 4 3.4 3 Quiescent Current(mA) Quiescent Current(mA) 3.5 2.5 2 1.5 1 3.2 3 2.8 0.5 2.6 0 0 PL78L08M3 5 10 15 20 25 Input Voltage(V) 30 35 0 50 100 Ambient Temperature(°C) 150 CYStek Product Specification Spec. No. : C517M3 Issued Date : 2003.04.02 Revised Date : . . Page No. : 4/4 CYStech Electronics Corp. SOT-89 Dimension Marking: A 2 1 3 H C 78L08 78L05 D B Style: Pin 1. Vout 2. GND 3. Vin E I F 3-Lead SOT-89 Plastic Surface Mounted Package CYStek Package Code: M3 G *: Typical Inches Min. Max. 0.1732 0.1811 0.1594 0.1673 0.0591 0.0663 0.0945 0.1024 0.01417 0.0201 DIM A B C D E Millimeters Min. Max. 4.40 4.60 4.05 4.25 1.50 1.70 2.40 2.60 0.36 0.51 DIM F G H I Inches Min. Max. 0.0583 0.0598 0.1165 0.1197 0.0551 0.0630 0.0138 0.0161 Millimeters Min. Max. 1.48 1.527 2.96 3.04 1.40 1.60 0.35 0.41 Notes: 1.Controlling dimension: millimeters. 2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.If there is any question with packing specification or packing method, please contact your local CYStek sales office. Material: • Lead: 42 Alloy ; solder plating • Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0 Important Notice: • All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek. • CYStek reserves the right to make changes to its products without notice. • CYStek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. • CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. PL78L08M3 CYStek Product Specification