PLL Product Specification Model: PLL250-647(Y) Rev: P4 Date: 9/1/2006 SIRENZA Customer: MICRODEVICES, INC. AppNote: 113 Option 007000 Operating Temperature Range: ( -10 ° to 85 ° C) RoHS Compliant To order models as RoHS Compliant add "Y" suffix to base model number. Parameter Min Frequency Range - Typ Max Units X 665 MHz X kHz X 0.45 mSec 2 5 dBm X -56 -50 dBm X 625 Step Size - 200 Settling Time - to within 5 deg. 0.4 Remarks Output Power: RF Switch ON -1 RF Switch OFF Output Phase Noise: -95 -90 dBc/Hz 100 kHz 1 kHz -125 -120 dBc/Hz 200 kHz -134 -130 dBc/Hz 400 kHz -144 -140 dBc/Hz 800 kHz -151 -146 dBc/Hz 3000 kHz -160 -156 dBc/Hz 6 6.25 Volts X X Power Supply: VCC 1: VCO, PLL CP 5.75 VCC 2: Amp 4.75 5 5.25 Volts X VCC 3: PLL IC,Switch 3.15 3.3 3.45 Volts X VCC 1 14 40 mA X VCC 2 45 80 mA VCC 3 10 15 mA 200 kHz -89 -82 dBc 400 kHz -98 -90 dBc 600 kHz -103 -100 dBc 800 kHz -105 -100 dBc 3000 kHz -115 -110 dBc -100 dBc -105 -95 dBc 2nd Harmonic -25 -20 dBc X 3rd Harmonic -35 -25 dBc X Supply Current: Spurious Product: non-harmonic Reference Feedthrough - X Harmonic Suppression: Performance tests and ratings for Sirenza Microdevices' products were performed internally by Sirenza and measured using specific computer systems and/or components and reflect the approximate performance of the the products as measured by those tests. Any difference in circuit implementation, test software, or test equipment may affect actual performance. The information provided herein is believed to be reliable at press time and Sirenza Microdevices assumes no responsibility for the use of this information. All such use shall be entirely at the user's own risk. Prices and specifications for Sirenza Microdevices' products are subject to change without notice. Buyers should consult Sirenza Microdevices' standard terms and conditions of sale for Sirenza's limited warranty with regard to its products. These products may be patented or include patented technology. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Sirenza Microdevices does not authorize or warrant any product for use in life-support devices and/or systems. Page 1 of 2 Model: PLL250-647 Rev: P4 Parameter Min Typ 9/1/2006 Max Units 1.25 Vp-p X Remarks Ref Osc Signal: Frequency Amplitude 52 0.75 Input Impedance 1 100 Output Impedance - MHz k 50 Output VSWR - 1.7:1 Package Information Package Type: PLL250 (1 x 1 x 0.252 inches ) Drawing Number: 61070 Comments X Indicates parameter to be tested 100% in production Switching Phase Error: By Design: < 50 us, 1 deg. typical - 3 deg. max.; > 50 us, 1 deg. max Max Phase Noise Peaking = 6 dBc/Hz, By Design All Power Supplies decoupled with LCL-Low-Pass filter All programming lines decoupled with RCR Low-Pass filter Pin 19 decoupled with RCR Low-Pass filter Performance tests and ratings for Sirenza Microdevices' products were performed internally by Sirenza and measured using specific computer systems and/or components and reflect the approximate performance of the the products as measured by those tests. Any difference in circuit implementation, test software, or test equipment may affect actual performance. The information provided herein is believed to be reliable at press time and Sirenza Microdevices assumes no responsibility for the use of this information. All such use shall be entirely at the user's own risk. Prices and specifications for Sirenza Microdevices' products are subject to change without notice. Buyers should consult Sirenza Microdevices' standard terms and conditions of sale for Sirenza's limited warranty with regard to its products. These products may be patented or include patented technology. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Sirenza Microdevices does not authorize or warrant any product for use in life-support devices and/or systems. Page 2 of 2 Sirenza Microdevices, Inc. 303 S. Technology Ct. Broomfield, CO 80021 tel 303.327.3030 fax 303.410.7988