P Premier M Magnetics Inc. PMCE-XXXX EMI/RFI COMMON MODE LINE FILTERS "INNOVATORS IN MAGNETICS TECHNOLOGY" MEDIUM & HI POWER ! Rated Voltage: 250Vac, 45/400Hz # < 50OC Temp Rise & Rated Current (1) % Operating Temp -40 to +80 OC " Low Profile Construction $ 3750Vrms Isolation & Insulation Resistance @ 500Vdc >100MΩ ELECTRICAL SPECIFICATIONS AT 25OC - OPERATING TEMPERTURE RANGE -40OC TO +80OC PART NUMBER Load VA @ RMS Line RATED RMS Current Amps rms 115V INDUCTANCE DCR @ 1KHz EACH WINDING (mH Min.) (Ohms Max.) 230V PACKAGE PMCE-0470 PMCE-0330 PMCE-0160 PMCE-0100 PMCE-0056 PMCE-0033 PMCE-0015 0.75 1.00 1.50 1.75 2.25 2.75 3.50 86.25 115.00 172.50 201.25 258.75 316.25 402.50 172.50 230.00 345.00 402.50 517.50 632.50 805.00 47.0 33.0 16.0 10.0 5.6 3.3 1.5 0.720 0.550 0.250 0.170 0.080 0.055 0.032 E25.4 E25.4 E25.4 E25.4 E25.4 E25.4 E25.4 PMCE-3470 PMCE-3330 PMCE-3220 PMCE-3100 PMCE-3056 PMCE-3033 PMCE-3015 1.75 2.00 2.50 3.50 4.50 5.50 7.00 201.25 230.00 316.25 402.50 517.50 632.50 805.00 402.5 460.00 632.50 805.00 1035.0 1265.0 1610.0 47.0 33.0 22.0 10.0 5.6 3.3 1.5 0.520 0.375 0.250 0.150 0.090 0.050 0.030 E35 E35 E35 E35 E35 E35 E35 Notes: (1) Temperature Rise is specified at maximum continuous current. Lower currents will result in reduced temperature rise. Design point is < 50OC rise at rated current. SCHEMATIC APPLICATION DOT ON BOBBIN DENOTES PIN #1 TYPICAL APPLICATION CIRCUIT 1 F1 LINE 115/230Vac 50/60Hz NEUT 4 PMCU-XXXX 2 1 Cy Cx Cx 3 Cy L1A FG L1B 4 2 Cx = 0.1uF (Line-to-Line) Cy = 2200pF (Line-to-FG) Specifications subject to change without notice. 3 pmce 10/98 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 • TEL: (949) 452-0511 • FAX: (949) 452-0512 • http://www.premiermag.com 1 P Premier M Magnetics Inc. PMCE-XXXX EMI/RFI COMMON MODE LINE FILTERS "INNOVATORS IN MAGNETICS TECHNOLOGY" PMCE-3XXX E35 PMCE-0XXX E25.4 Dimensions in inches (mm) Dimensions in inches (mm) PART IS REVERSIBLE. IT CAN BE INSERTED INTO PCB EITHER WAY. PART IS REVERSIBLE. IT CAN BE INSERTED INTO PCB EITHER WAY. DOT ON BOBBIN DENOTES PIN #1 DOT ON BOBBIN DENOTES PIN #1 1 4 1 L1B L1A 2 4 2 3 4 PIN #1 DOT 1 3 3 P PMCE-3XXX YYWW M 3 P PMCE-0XXX YYWW M 4 L1B L1A PIN #1 DOT 2 .750 (19.05) MAX 1 2 1.200 (30.48) MAX 1.015 (25.78) MAX .790 (20.07) MAX 1.060 (27.00) MAX .18 (4.5) 1.450 (36.83) MAX .031 DIA (0.8) .539 (13.70) .16 (4.0) .031 DIA (0.8) .768 (19.50) .579 (14.70) 4 3 .866 (22.00) 1 Specifications subject to change without notice. 2 pmce 10/98 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 • TEL: (949) 452-0511 • FAX: (949) 452-0512 • http://www.premiermag.com 2