E L E C T R O N I C PMR SERIES Power Metal Low OHM Chip Resistor □ FEATURES - Rated power from 0.125 up to 2W - Low resistance value - Excellent temperature coefficient - Excellent frequency response - Lead-Free available □ APPLICATIONS - □ Current detection Linear and switching power supplies Motherboard Digital camera Mobile phone Dimensions (mm) Code Letter 0805 2010 2512 L 2.05 ± 0.25 5.10 ± 0.25 6.35 ± 0.25 W 1.30 ± 0.25 2.55 ± 0.25 3.20 ± 0.25 H 0.35 ± 0.15 0.65 ± 0.15 0.55 ± 0.25 TECHNICAL SPECIFICATIONS Characteristics Power Ratings Resistance Value Temperature Coefficient of Unit W mΩ Feature Measurement Method Model Value PMR0805 0.125 ~ 0.25 PMR2010 0.5 ~ 2.0 PMR2512 1.0 ~ 2.0 Model Value PMR0805A 10 ~ 200 PMR0805B 10 ~ 200 PMR2010C 1 ~ 200 PMR2010D 1 ~ 500 PMR2010E 1 ~ 500 PMR2512D 5 ~ 10 PMR2512E 10 ~ 100 JIS Code 3A / JIS Code 3D Refer to JIS C 5202 5.1 ppm/℃ 75 ~ 275 Refer to JIS C 5202 5.2 Operation Temperature Range ֯C ﹣60 ~ ﹢170 - Resistance Tolerance % ± 0.5 ~ 3.0 JIS C 5201 4.2.4 Resistance Max. Working Voltage V 1/2 (P*R) http:// www.sirectsemi.com - PMR SERIES □ STANDARD ELECTRICAL SPECIFICATIONS Model Power Rating (W) Resistance Range (Ω) RTC (ppm/֯C) ±75 PMR0805 0.125 0.01-0.20 ±100 ±150 ±275 ±75 PMR0805 0.25 0.01-0.20 ±100 ±150 ±275 ±75 PMR2010 0.5 0.001-0.20 ±100 ±150 ±275 ±75 PMR2010 1.0 0.001-0.5 ±100 ±150 ±275 ±75 PMR2010 2.0 0.001-0.5 ±100 ±150 ±275 ±75 PMR2512 1.0 0.005-0.01 ±100 ±150 ±275 ±75 PMR2512 2.0 0.01-0.1 ±100 ±150 ±275 http:// www.sirectsemi.com Tolerance (%) Dimensions (mm) ±0.5 L=2.05mm±0.25mm ±1 W=1.30mm±0.25mm ±3 H=0.35mm±0.15mm ±0.5 L=2.05mm±0.25mm ±1 W=1.30mm±0.25mm ±3 H=0.35mm±0.15mm ±0.5 L=5.10mm±0.25mm ±1 W=2.55mm±0.25mm ±3 H=0.65mm±0.15mm ±0.5 L=5.10mm±0.25mm ±1 W=2.55mm±0.25mm ±3 H=0.65mm±0.15mm ±0.5 L=5.10mm±0.25mm ±1 W=2.55mm±0.25mm ±3 H=0.65mm±0.15mm ±0.5 L=6.35mm±0.25mm ±1 W=3.20mm±0.25mm ±3 H=0.65mm±0.15mm ±0.5 L=6.35mm±0.25mm ±1 W=3.20mm±0.25mm ±3 H=0.65mm±0.15mm PMR SERIES PART NUMBER INFORMATION PMR2512 – A - R005 - a - 1 –A Tolerance Package Model Resistance Value PMR8050 R005=5mΩ 1=±0.5% PMR2010 R050=50mΩ 2=±1% PMR2512 3=±3% Power Ratings A=0.125W B=0.25W C=0.5W D=1W E=2W Temperature Coefficient a=±75ppm/֯ C b=±100ppm/֯ C c=±150ppm/֯ C d=±275ppm/֯ C Rated Power in % □ http:// www.sirectsemi.com Packaging A=500 pcs/reel B=1,000 pcs/reel C=2,000 pcs/reel D=4,000 pcs/reel E=5,000 pcs/reel PMR SERIES □ RELIABILITU PERFORMANCE Test Item Thermal Shock Condition of Test -60°C to + 150°C, 1000 cycles, 15 minutes at each extreme Requirements ± 0.5% Short Time Overload 5 x rated power for 5 seconds ± 0.5% Low Temperature Storage Kept - 60°C for 24 hours ± 0.5% High Temperature Exposure Kept + 170°C for 1000 hours ± 0.5% Bias Humidity Mechanical Shock + 85°C, 85% RH, 10% Bias, 1000 hours 100G’s for 6 milliseconds, 5 pulses ± 0.5% ± 0.5% Measurement Method Refer to JIS C 5202 7.4 Refer to JIS C 5202 5.5 Refer to JIS C 5202 7.1 Refer to JIS C 5202 7.11 - Refer to JIS C 5202 6.2 Frequency varied 10 to 2000Hz Vibration in one minute, ± 0.5% - 3 directions, 12 hours Load Life Resistance to Solder Heat Moisture Resistance 1000 hours @ rated power, + 70°C, 1.5 hours “ON”, 0.5 hours “OFF” + 260°C Solder,10 - 12 second dwell, 25mm/second emergence MIL-STD-202, Method 106, 0% power, 7a and 7b not required http:// www.sirectsemi.com ± 1.0% ± 0.5% ± 0.5% Refer to JIS C 5202 7.10 Refer to JIS C 5202 6.4 - PMR SERIES □ PACKING 4.5 0.5 Tape Packaging Dimensions Reel Dimensions Sirectifier Global Corp., Delaware, U.S.A. U.S.A.: [email protected] France: [email protected] Taiwan: [email protected] Hong Kong: [email protected] China: [email protected] …Thailand: [email protected] Philippines: [email protected] Belize: [email protected] http:// www.sirectsemi.com