PRELIMINARY DATA SHEET | MARCH 21, 2008 PONA 3000 Series Erbium Doped Fiber Amplifier Applications • High Performance Supertrunking Links • High Power Distribution Networks • Fiber Deep Architectures • FTTx Networks Features • Full Function High Power Fiber Optic Amplifier Ready for Integration • Low Noise Figure (Typ < 6 dB) • Total Input Power Range: –10 dBm to The EMCORE PONA 3000 Series Fiber Optical Amplifier Module is an +12 dBm ideal building block for OEM system integrators. The family of PONA Total Output Power: +27 dBm to 3000 Optical Amplifiers is designed to meet the most demanding noise • +35 dBm (Optical Output Power Splitter is Optional For These Units) performance requirements of CATV and FTTx applications, and • Standard RS-232 Communications performs all the functions required of an optical amplifier for system • Low Electrical Power Consumption integration. Packaged in a convenient 2RU housing, the PONA 3000 • Input / Output Isolation > 40/40 dB series optical amplifiers provide optical isolation on the input and output • Polarization Dependant Gain < 0.1 dB • Polarization Mode Dispersion < 0.5 ps of the gain block for stable, low noise operation. The input and output optical signal power levels are detected for monitoring and control. The input optical signal is amplified with active gain control for a constant output power level, or with active output power control for constant gain mode. The PONA 3000 series optical amplifiers also provide monitoring functions and associated alarms for all vital characteristics. The optical output of the PONA 3000 series optical amplifiers can be split into number of ports by an optional internal splitter. PONA3000 series includes AC/DC power supply, front panel, optical splitters, network card and all necessary connectors. 1 of 5 For more information on this and other products: Contact EMCORE sales at 626-293-3400, or visit www.emcore.com. PRELIMINARY DATA SHEET | MARCH 21, 2008 Specifications PROPERTY Product Code PERFORMANCE Operating Input Power Operating Input Power Output Power Noise Figure Static Gain Flatness Dynamic Gain Flatness Output Power Stability Power Consumption (steady state regime) Remnant pump power to output UNIT LIMIT PONA MODELS 3030 3032 3027 COMMENT 3035 (note 1) Pin (dBm) Pin (dBm) Po (dBm) NF (dB) GF (dB) (dB) (dB) Psys (W) Max Min Typ/Max Max Max Max Max Prp (dBm) Nom. +12 -10 27.0 5.5/6.0 +/-1.0 +/-2.00 +/- 0.25 40 25 +12 -10 30.0 5.5/6.0 +/-1.0 +/-2.00 +/- 0.25 50 30 +12 -10 32.0 5.5/6.0 +/-1.0 +/-2.25 +/-0.25 65 40 +12 -10 35.0 5.5/6.0 +/-1.0 +/-2.50 +/- 0.25 80 50 <-30 <-30 <-30 <-30 Nominal (note 2) (note 3) (note 4) (note 5) (note 6) o 50 C Case (premium) o 50 C Case (economy) (note7) Notes: 1) Unless stated otherwise all specifications apply over the full temperature range and humidity 2) Depending on the fiber optic patchcord interface the measured value can vary up to 0.5 dB less than the actual value 3) Measured @ 25°C, EPin = 0 dBm 4) Measured with a swept Probe Signal (Pp), where Pp = 0 dBm @ 25°C 5) Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ 1553nm; (Pt = Pp+20 dB; Pt + Pp = 0 dBm) @ 25°C 6) Stability over polarization and temperature 7) Premium version – PONA with cooled, Telcordia qualified pumps Economy version – PONA with uncooled pumps Physical GENERAL PROPERTY Operating Wavelength Operating Case Temperature Storage Temperature Operating Humidity Voltage Supply Range REQUIREMENT COMMENTS 1545 ~ 1562nm Standard 0°C to 50°C -40°C to 85°C 20% to 85% 85 VAC to 265 VAC 50/60 Hz Standard Standard Non-condensing AC version -36 to -60 V DC DC version *(Redundant Power Supply is Available by Customer Request) Optical Connectors See ordering information Dimensions In Inches 19.0”W x 15.7”D x 3.44”H User Specified 19’’ Rack Mounted, 2 RU 2 of 5 For more information on this and other products: Contact EMCORE sales at 626-293-3400, or visit www.emcore.com. PRELIMINARY DATA SHEET | MARCH 21, 2008 Block Diagram: Cladding Pump Technology Cladding pump technology uses erbium/ytterbium fiber optic assemblies (double clad fiber and multi-mode pump lasers) to produce cost effective high power optical amplification. This technology enables the development of higher power EDFAs-something that is cost prohibitive when using standard erbium fiber and single mode pumps. 980 nm pump Er/Yb Assembly Er Input Hybrid Filter / Isolator Input monitor Isolator 1% Tap Output Monitor Multi-mode pumps Drive Electronics Sample FTTx Architecture Splitter OLT Voice ONT ONT ONT ONT 1490nm Businesses 1310nm Data WDM 1550nm Video Splitter Splitter 1550nm Tx - Voice - Data - Video ONT ONT ONT ONT Multi Dwelling Units RF 20 Km Splitter ONT ONT EDFA 20 outputs of 20 dBm ONT ONT Homes 3 of 5 For more information on this and other products: Contact EMCORE sales at 626-293-3400, or visit www.emcore.com. PRELIMINARY DATA SHEET | MARCH 21, 2008 Outline Drawing AC and DC versions shown below with 8-port option 4 of 5 For more information on this and other products: Contact EMCORE sales at 626-293-3400, or visit www.emcore.com. PRELIMINARY DATA SHEET | MARCH 21, 2008 Ordering Information PONA30 Power Level - - - Connector Options - * - # of Output Ports Class Input Voltage 27: 27 dBm SC: SC/APC 01: 1 port P: Premium AC: 90-260 VAC 50/60 Hz 30: 30 dBm FC: FC/APC 02: 2 ports E: Economy DC: -48 VDC 32: 32 dBm 35: 35 dBm EC: E2000/APC TC: SC/UPC 04: 4 ports 08: 8 ports GC: FC/UPC 16: 16 ports 20: 20 ports Class: 2DC: Redundant DC Premium: Utilizes cooled pump lasers Economy: Utilizes uncooled pump lasers * PONA3000 series with one or two optical outputs will have special high power output optical connector(s) and optical bulkhead(s) For exact model number, please contact your Sales Representative. Qualifications FCC: Subpart B. Part 15, class “A” Unintentional Radiators CE: EN50083-2, 19995 with Amendment 1, which Incorporates EN 55013 Radiated and Conducted Emissions EN 61000-4-3 Radiated Immunity EN 55020 Conducted Immunity EN 61000-3-2 Harmonics All Components Meet Telcordia GR-1312 and GR-486 Standards (Except Pumps in Economy Class). EN 61000-3-2 Harmonics Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of the product at any time without notice. EMCORE, and the EMCORE logo are trademarks of EMCORE Corporation. 5 of 5 For more information on this and other products: Contact EMCORE sales at 626-293-3400, or visit www.emcore.com.