PSA-4031 Series Switching Power Supply V DE LVD Features • High efficiency • Over voltage protection • Built-in EMI filter • Short circuit protection • 100% Burn-in for 24hrs. • UL/CSA/VDE approval Applications • Disk drive systems • Test equipment • Peripheral equipment • Microprocessor based systems Safety Compliance • UL 1950 • VDE 0806 • CSA 22.2 1402C Level 3 • EN 60950 Mechanical Characteristics Dimensions: • Length: 127mm (5.0in) • Height: 30mm (1.2in) • Width: 76.2mm (3.0in) • Weight: 0.27kgs (0.6Ibs) Output Specifications Model DC Output Voltage PSA-4005 PSA-4012 PSA-4015 PSA-4024 PSA-4031 PSA-4032 PSA-4033 PSA-4034 PSA-4035 +5V +12V +15V +24V +5.1V +12V -12V +5.1V +12V -12V +5.1V +12V -5V +5.1V +15V -15V +5.1V +24V V1 V1 V1 V1 V1 V2 V3 V1 V2 V3 V1 V2 V3 V1 V2 V3 V1 V2 Load Ripple Total Tolerance Min. Max. @20CFM Peak P-P (2) 0.0A 0.0A 0.0A 0.0A 0.5A 0.2A 0.0A 0.5A 0.0A 0.0A 0.5A 0.2A 0.0A 0.5A 0.2A 0.0A 0.5A 0.3A 6.0A 3.0A 2.5A 1.5A 3.0A 2.0A 0.5A 4.0A 0.5A 0.5A 3.0A 2.0A 0.5A 3.0A 2.0A 0.5A 3.0A 1.0A 100mV 120mV 150mV 240mV 50mV 120mV 120mV 50mV 120mV 120mV 50mV 120mV 50mV 50mV 150mV 150mV 50mV 240mV 8.0A 4.0A 3.3A 2.0A 5.0A 2.0A 0.5A 6.0A 0.5A 0.5A 5.0A 2.0A 0.5A 5.0A 2.0A 0.5A 5.0A 1.0A 8.0A 4.0A 3.3A 2.0A 7.0A 3.0A 0.5A 7.0A 0.5A 0.5A 7.0A 3.0A 0.5A 7.0A 3.0A 0.5A 7.0A 2.0A + 2% + 2% + 5% + 2% + 2% + 5% + 5% + 2% + 5% + 5% + 2% + 5% + 5% + 2% + 5% + 5% + 2% + 5% (1) Peak output current lasting less than 30 seconds with duty cycle less than 10%. During peak loading, peak total power must not exceed 60W. (2) Ripple & noise is measured at 20MHz bandwidth limit by using a 10 inch twisted wire terminated with a 10µf capacitor in parallel 0.1µf ceramic capacitor, it is also necessary to connect the primar y and secondary ground holes together by jumper wire or by mounting screws to metal case under evaluation. (3) Total output power must not exceed 40W at convection cooling and 60W at 20CFM air flow condition. PHIHONG 40W Universal Input Series ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ISO 9001 • BABT Facility Approvals 40W Universal Input Series ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ PSA-4031 Series Switching Power Supply Characteristics AC Input Voltage 90VAC-264VAC AC Frequency 47 to 63Hz AC Input Current 1.0A(rms) for 115VAC 0.5A(rms) for 230VAC DC Output See Chart Efficiency 70% typical at full load Hold-up Time 16msec. at full load, 115VAC input ENTERPRISE CO., LTD. 16, Lane 530, Chung Cheng N. Rd. Sanchung City, Taipei Taiwan 24103, R.O.C. Phone: 886-2-988-2126 886-2-980-5255 Fax: 886-2-981-7086 886-2-983-3222 Overcurrent Protection All outputs equipped with automatic recovery current limiting circuit Operation Temperature 0 to +40˚C full rated load Storage Temperature -25˚C to +85˚C Temperature Coefficient 0.04% per ˚C Insulation Resistance 50M ohm minimum MTBF Calculated Greater than 100,000 hours, full load, 25˚C (MIL-HDBK-217) EMI Meets conduction limits of FCC class B rules VDE 0871 class B Overvoltage Protection 5.6V to 6.5V on main output Dimension Diagram Unit: mm (inch) PHIHONG USA W ester nOf fice: 374 S. Milpitas Blvd. Milpitas, CA 95035 Phone: 408-946-7888 Fax: 408-946-8098 Email: [email protected] Internet: http://www.phihongusa.com EasternOffice: SouthwesternOffice: 3325 Cochran St., Suite 200 Simi Valley, CA 93063 Phone: (805) 520-8177 Fax: (805) 520-3907 Output Connections: V1 Single Pins 1,2,3 Triple Pins 2,3 V2 V3 Pin 1 Pin 6 RETURN Pins 4,5,6 Pins 4,5 CN1: Input: Molex 09-50-3031 or equivalent CN2: Molex 09-50-3061 or equivalent 4031/701 3005 Brodhead Road Bethlehem, PA 18017 Phone: (610) 866-9911 Fax: (610) 866-9920