EVERLIGHT 30-01USOC-S400-A9

Technical Data Sheet
3mm POWER LED
30-01USOC/S400-A9
Features
. High Flux Output.
. Designed for High Current Operation.
. Low Thermal Resistance.
. Low Profile.
. Packaged in Tubes for Use with Automatic Insertion Equipment.
. The product itself will remain within RoHS compliant version.
Descriptions
This revolutionary package design allows the light designer to reduce the number of LEDs
required and provide a more uniform and unique illuminated appearance than with other LED
solutions. This is possible through the efficient optical package design and high-current capabilities.
The low profile package can be easily coupled with reflectors or lenses to efficiently distribute
light and provide the desired light appearance.
Applications
. Automotive Exterior Lighting
. Electronic Signs and Signals
. Special Lighting application
Device Selection Guide
PART NO.
30-01USOC/S400-A9
Revision
Chip
Material
Emitted Color
AlGaInP
Reddish Orange
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Device number: DLE-300-053
Established date: 08-20-2007
:3
LifecyclePhase:
Rev. 3
Lens Color
Water Clear
Page: 1 of 6
Established by: Jim Lin
Release Date:2008-09-20 00:15:51.0
Expired Period: Forever
Technical Data Sheet
3mm POWER LED
30-01USOC/S400-A9
Package Dimensions
Notes: 1.All dimensions are in millimeters
2.An epoxy meniscus may extend about 1.5mm(0.059") down the leads
3.Tolerances unless dimensions ±0.25mm
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Units
Continuous Forward Current
IF
70
mA
Peak Forward Current(Duty 1/10 @ 1KHZ)
IFP
100
mA
Reverse Voltage
VR
5
V
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +100
℃
Soldering Temperature(T=5 sec)
Tsol
260 ± 5
℃
LED Junction Temperature
Power Dissipation at (or below) 25℃ Free Air
Tj
125
℃
Pd
220
mW
ESD
2000
V
Temperature
Electrostatic Discharge
Revision
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Device number: DLE-300-053
Established date: 08-20-2007
:3
LifecyclePhase:
Rev. 3
Page: 2 of 6
Established by: Jim Lin
Release Date:2008-09-20 00:15:51.0
Expired Period: Forever
Technical Data Sheet
3mm POWER LED
30-01USOC/S400-A9
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
Typ.
Max.
Condition
Unit
Total Flux
Φv
2250
3200
4700
IF=70mA
mlm
Viewing Angle
2θ1/2
----
70
----
IF=70mA
deg
Peak Wavelength
λp
----
622
----
IF=20mA
nm
Dominant Wavelength
λd
613
616
624.5
IF=20mA
nm
Spectrum Radiation
Bandwidth
△λ
----
18
----
IF=20mA
nm
Forward Voltage
VF
1.95
2.4
2.67
IF=70mA
V
Reverse Current
IR
----
----
10
VR=5V
µA
(1)
(2)
(3)
Rank
30-01USOC/S400-A9
(2) λd(nm)
(1) VF(V)
(3)Φv(mlm)
Bin
Min
Max
Bin
Min
Max
Bin
Min
Max
0
1.95
2.19
7
613.0
617.5
Y1
2500
3300
1
2.07
2.31
8
616.5
620.5
Y2
2900
4100
2
2.19
2.43
9
619.5
624.5
Y3
3400
5150
3
2.31
2.55
4
2.43
2.67
*Measurement Uncertainty of Forward Voltage:±0.1V
*Measurement Uncertainty of Luminous Intensity: ±15%
*Measurement Uncertainty of Dominant Wavelength ±1.0nm
Revision
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Device number: DLE-300-053
Established date: 08-20-2007
:3
LifecyclePhase:
Rev. 3
Page: 3 of 6
Established by: Jim Lin
Release Date:2008-09-20 00:15:51.0
Expired Period: Forever
Technical Data Sheet
3mm POWER LED
30-01USOC/S400-A9
Typical Electro-Optical Characteristics Curves
Relative Intensity vs. Wavelength
Forward Current vs. Forward Voltage
80
FORWARD CURRENT (mA)
RELATIVE INTENSITY
1.00
0.50
0.00
560
580
600
620
640
WAVELENGTH (nm)
60
40
20
0
1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80
FORWARD VOLTAGE (V)
660
Relative Intensity vs. Forward Current
Forward Current vs. Ambient Temp.
70
1.00
60
FORWARD CURRENT (mA)
RELATIVE INTENSITY
0.80
0.60
0.40
0.20
50
40
30
20
10
0.00
0
10
20
30
40
50
60
FORWARD CURRENT (mA)
0
70
0
20
40
60
80
AMBIENT TEMPERATURE (C)
100
Relative Intensity vs. Off Axis Angle
Relative Intensity vs. Angle Displacement
1.0
RELATIVE INTENSITY
0
20
-40
40
-60
60
-80
1.0
Revision
RELATIVE INTENSITY
-20
0.5
80
0.8
0.6
0.4
0.2
0.0
0.2
0.4
0.6
0.8
1.0
0.0
-90
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Device number: DLE-300-053
Established date: 08-20-2007
:3
LifecyclePhase:
-60
-30
0
30
60
VIEWING ANGLE (DEGREE)
Rev. 3
90
Page: 4 of 6
Established by: Jim Lin
Release Date:2008-09-20 00:15:51.0
Expired Period: Forever
Technical Data Sheet
3mm POWER LED
30-01USOC/S400-A9
Packing Quantity Specification
(1) 60 pcs/1 tube, 30 tubes/1 small inside box, 12 small inside boxes/1 outside box
(2) 60 pcs/1 tube, 105 tubes/1 big inside box, 4 big inside boxes/1 outside box
Label Form Specification
(1)Tube Label Form
PART NO: 30-01USOC/S400-A9
QTY: 60
LOT NO:
CAT:
(2)Box Label Form
EVERLIGHT
CPN:
P/N:
RoHS
30-01USOC/S400-A9
QTY:
CAT:
HUE:
REF:
LOT NO:
MADE IN TAIWAN
PART NO: Everlgiht’s Production Number
QTY: Packing Quantity
LOT NO: Lot Number
CAT: Ranks of Forward Voltage, Dominant Wavelength and Total Flux
CPN: Customer’s Production Number
P/N : Production Number
HUE: Reference
REF: Reference
MADE IN TAIWAN: Production Place
Revision
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Device number: DLE-300-053
Established date: 08-20-2007
:3
LifecyclePhase:
Rev. 3
Page: 5 of 6
Established by: Jim Lin
Release Date:2008-09-20 00:15:51.0
Expired Period: Forever
Technical Data Sheet
3mm POWER LED
30-01USOC/S400-A9
Notes
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions
for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for
any damage resulting from use of the product which does not comply with the absolute
maximum ratings and the instructions included in these specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT
corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s
consent.
4. Soldering Condition
Careful attention should be paid during soldering. When soldering, leave more then 3mm from
solder joint to case, and soldering beyond the base of the tie bar is recommended.
Avoiding applying any stress to the lead frame while the LEDs are at high temperature
particularly when soldering.
Recommended soldering conditions
Hand Soldering
DIP Soldering
Temp. at tip of iron
400℃ Max.
(30W Max.)
Preheat temp.
100℃ Max.
(60 sec Max.)
Soldering time
3 sec Max.
Bath temp.
265 Max.
Distance
3mm Min.(From solder
joint to case)
Bath time.
5 sec Max.
Distance
3mm Min.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C.
Revision
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http:\\www.everlight.com
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Device number: DLE-300-053
Established date: 08-20-2007
:3
LifecyclePhase:
Rev. 3
Page: 6 of 6
Established by: Jim Lin
Release Date:2008-09-20 00:15:51.0
Expired Period: Forever