Optoway PT-9530 SERIES ******************************************************************************************************************************************************* 3.3V / 2.5 Gbps InGaAs PIN-TIA Receiver PT-9530 InGaAs PIN-TIA WITH RECEPTACLE ******************************************************************************************************************************************************* FEATURES ! InGaAs/InP PIN Photodiode with AGC transimpedance amplifier ! Differential ended output ! Single +3.3V operation ! Speed up to 2.5 Gbps ! - 40 ~ +85 ºC operation temperature DESCRIPTION PT-9530 series are designed as optical signal receivers with AGC transimpedance amplifier. Their wide dynamic ranges, differential outputs are suited for telecommunications, especially Gigabit Ethernet,Fiber Channel and SONET OC-48. AC / ELECTRICAL AND OPTICAL CHARACTERISTICS (TC=25°C) Symbol Parameter Test Conditions Dectection Range Min. Typ. Max. Unit 1100 1310 1650 nm 2 2.5 3 V/mW G Differential Gain AC coupled, load=50 Ω BW Bandwidth -3 dB point 1.5 2 Psat Saturation Power λ=1300nm -3 - - dBm -21 -19 dBm 50 65 ohm Sens Sensitivity Rout Output Resistance -10 BER=10 @2.5 Gb/s - GHz 2500 Operation Speed Mbps DC / ELECTRICAL CHARACTERISTICS (TC=25°C) Symbol Parameter VCC Power Supply ICC Supply Current (no load) Min. Typ. Max. Unit 3.15 3.3 3.45 V - - 40 Value Unit 4.5 V mA ABSOLUTE MAXIMUM RATING (TC=25 ºC) Symbol Parameter V Voltage Topr Operating Temperature -40~+85 ºC Tstg Storage Temperature -40~+85 ºC ******************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax:886-3-5979737 e-mail: [email protected] http: // www.optoway.com.tw 11/1/2002 Optoway PT-9530 SERIES ******************************************************************************************************************************************************* MECHANICAL DIMENSION (mm) and PIN ASSIGNMENT Thru Holes 2.2 dia. Note: Specifications subject to change without notice. ORDER INFORMATION Part No.: P T − Code 0 3 9 Voltage 5V 3.3V 5 3 Code Blank B 0 □ − □ □ PIN Assignment Type A Type B Code F FB T S SB Connector Type FC/PC FC/PC (Board Mount) ST/PC SC/PC SC/PC (Board Mount) ******************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax:886-3-5979737 e-mail: [email protected] http: // www.optoway.com.tw 11/1/2002