NT IA PL M CO S Features ■ *R oH ■ ■ ■ ■ Applications Carbon element Insulated shaft Snap-in clip Center detent option RoHS compliant* ■ ■ ■ ■ ■ Audio/TV sets Car radio Amplifiers/mixers/drum machines/ synthesizers PCs/monitors Appliances PTV09 Series - 9 mm Potentiometer Electrical Characteristics Taper ....................................Linear, audio Standard Resistance Range ........................1 K ohms to 1 M ohms Standard Resistance Tolerance ....±20 % Residual Resistance ......................500 ohms or ±1 % max. Environmental Characteristics Operating Temperature ..................................-10 °C to +50 °C Power Rating (Linear and Audio) ................0.05 watt Maximum Operating Voltage (Linear and Audio)......20 VDC, 50 VAC Sliding Noise ......................100 mV max. Mechanical Characteristics Mechanical Angle ....................280 ° ±5 ° Rotational Torque ............10 to 100 g-cm Detent Torque ..................40 to 200 g-cm Stop Strength......................2 kg-cm min. Rotational Life ....................10,000 cycles Soldering Condition ............300 °C max. within 3 seconds Hardware ..............No hardware supplied Product Dimensions PTV09A-4 (with shaft style F) PTV09A-2 (with shaft style F) +0 4.5 -0.1 +0 (.177-0.0003 ) L± +0 4.5 -0.1 +0 (.177-0.0003 ) 0.5 (.019) L± 2.0 (.078) F 10.0 (.393) +0 3.8 3.5 (.137) (.149) 6.0 -0.1 +0 (.236 -0.0003 ) F 7.0 (.275) 2.6 (.102) +0 6.0 -0.1 +0 (.236 -0.0003 ) 6.8 (.267) 9.8 (.385) 0.8 (.031) 6.8 (.267) C0.5 0.8 (.031) 3.5 (.137) 3.8 (.149) 2.0 (.078) 3.3 (.129) 0.5 (.019) 40 ° 9.8 (.385) 40 ° 5.0 (.196) 5.5 (.216) 5.5 (.216) 11.4 (.448) How To Order PTV09A - 2 0 20 F - B 203 0.8 3 PLCS. (.031) 5.0 (.196) 7.4 (.291) Model Terminal Configuration (Pin Layout) • 2 = PC Pins Vertical/ Down Facing • 4 = PC Pins Horizontal/ Rear Facing Option • 0 = No Detent • 2 = Center +0.2 1.8 -0.0 2 PLCS. (.070 +0.0007 -0.0 ) +0.2 2.1 -0.0 2 PLCS. (.082 +0.0007 -0.0 ) 8.2 (.322) +0.2 2.1 -0.0 2 PLCS. (.082 +0.0007 -0.0 ) 10.6 (.417) +0.2 Standard Resistance Table F-Type Shaft L Other styles available. F 15 (.591) 6 (.236) 5.0 (.196) SHAFT SHOWN IN CCW POSITION 5.0 (.196) SHAFT SHOWN IN CCW POSITION Resistance Code (See Table) 7.0 (.275) +0.2 1.0 -0.0 3 PLCS. (.039 +0.0007 -0.0 ) 3.3 (.129) 1.0 -0.0 3 PLCS. (.039 +0.0007 -0.0 ) Shaft Style • F = Flat Type Insulated Shaft • S = Insulated Knurled (24 Teeth)* • U = Insulated Knurled (40 Teeth) *Available in 20 mm or 25 mm shaft lengths only. +0.2 1.8 -0.0 2 PLCS. (.070 +0.0007 -0.0 ) RECOMMENDED PCB LAYOUT Standard Shaft Length • 15 = 15 mm • 20 = 20 mm • 25 = 25 mm • 30 = 30 mm Resistance Taper • A = Audio Taper • B = Linear Taper RECOMMENDED PCB LAYOUT 20 (.787) 7 (.275) DIMENSIONS ARE: 25 (.984) 12 (.472) MM (INCHES) 30 (1.181) 12 (.472) Resistance (Ohms) 1,000 2,000 5,000 10,000 20,000 50,000 100,000 200,000 500,000 1,000,000 Resistance Code 102 202 502 103 203 503 104 204 504 105 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. PTV09 Series - 9 mm Potentiometer Product Dimensions Shaft Styles S-Type PTV09A-4 (with shaft style U) PTV09A-2 (with shaft style U) L 4.2 (.165) 3.8 (.149) 0.6 (.024) T L 4.0 DIA. (.157) 24 TEETH 3.2 (.126) 7.5 (.295) U-Type 9.8 (.385) 0.3 (.012) 2 ± 0.15 (0.78 ± .006) 3.3 (.129) 0.6 (.023) L K 5.2 (.204) 7.1 (.279) 7.5 (.295) 2.4 (.094) 6.0 DIA. (.236) 6.8 (.267) L 40 TEETH 5.0 (.196) 9.8 (.386) 8.8 (.346) 0.8 (.031) RECOMMENDED PCB LAYOUT S-Type Shaft 10.6 (.417) +0.2 1.8 -0.0 2 PLCS. (.070 +0.0007 -0.0 ) 5.2 (.205) 6.5 (.255) 20 (.787) 7 (.275) L T 7.0 (.275) +0.2 2.1 -0.0 2 PLCS. (.082 +0.0007 -0.0 ) 5.0 (.196) 3.8 (.149) 5.0 (.196) 25 (.984) 7 (.275) 0.8 3 PLCS. (.031) +0.2 1.0 -0.0 3 PLCS. (.039 +0.0007 -0.0 ) U-Type Shaft 15 (.591) 6 (.236) L K 7.8 (.307) 20 (.787) 7 (.275) 25 (.984) 7 (.275) 30 (1.181) 7 (.275) RECOMMENDED PCB LAYOUT 8.2 (.322) 5.0 ± 0.5 (.196 ± .019) +0.2 1.8 -0.0 2 PLCS. (.070 +0.0007 -0.0 ) +0.2 2.1 -0.0 (.082 +0.0007 -0.0 ) 2 PLCS. +0.2 1.0 -0.0 (.039 +0.0007 -0.0 ) 3 PLCS. DIMENSIONS ARE: REV. 04/06 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) Derating Curve Rating Power Ratio (%) 3.3 ± 0.5 (.129 ± .019) 100 80 60 40 33 20 0 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature (°C)