ASIC ‘Performer’
Pressure Transducers
and Transmitters
20, 60, 100, 250, 400 and 700 bar
Brochure: HYD030GB1
ASIC ‘Performer’
Pressure Transducers and Transmitters
APPLICATIONS FOR THE ASIC PERFORMER
Fork lift trucks - braking and load systems.
Exploded view
of the ASIC
Performers
threaded head
Truck mounted cranes - load safety systems.
Earth moving machinery - hydraulic gearbox control.
Racing car - gearbox, fuel, cooling and suspension systems.
Earth moving machinery - hydraulic gearbox control.
Water usage systems - pressurised systems for industrial and hi-rise usage.
Forest Machinery - felling and logging.
Paper mills - speed control and weighing systems.
The Parker Filtration ASIC Performer Pressure Transducers and Transmitters.
To overcome the historical problems caused by “gauge creep”
of thick film sensors and the fragility of peizo-electric/ceramic
based sensors, the new ‘Performer’ range uses a high-grade
Stainless Steel element, which is coated with layers of both
insulative and alloy materials. These are trimmed to a very
close tolerance using state of the art, semiconductor grade,
laser and lon beam methods. This extremely accurate “front
end” is then coupled with Application Specific Integrated
Circuitry (ASIC) to produce a sensor that is both accurate
In addition to the
standard 6 pressure
ranges available, using
the ASIC technology
(Application Specific
Integrated Circuit)
programmable software,
any variation can be
manufactured. Consult
Parker for any additional
information.
A comprehensive range of Pressure Transducers
and Transmitters are available from Parker
Filtration.
One-piece body and diaphragm machining
ensures long-term product stability.
All Stainless Steel construction.
6 Transducer pressure ratings, 0-5V and 1-6V outputs.
6 Transmitter pressure ratings - 2-wire 4-20mA output.
Micro plug and M12 connector options.
and repeatable over a wide, fully compensated, temperature
range, -40°C to +125°C. The “Performer” is now available in a
variety of thread-form and connector options.
This new design offers a high stability, very low drift device,
which can operate over a wide thermal range. Powered from
an extended working supply range (9-35vdc {PTD} and
11-35vdc {PTX}).
ASIC ‘Performer’
Pressure Transducers and Transmitters
SPECIFICATION
THREAD FORM OPTIONS
Pressure ranges:
Vibration:
G1/4 (1/4BSP) for bonded seal
20, 60, 100, 250, 400, 700 Bar.
>50g
Minimum over pressure:
Installation:
G /4 ( /4BSP) with integral
seal
Rated pressure times 1.5min
Spanner size 22A/F.
M12 x 1.5-6g
NPTF1/8 (ANSI B1.20 3-1976)
Minimum burst pressure:
Max. (recommended)
tightening torque = 30Nm
7
/16 UNF (37° Flare to SAE
J514, size 4)
All thread forms and sensor
interface are made from174PH Stainless Steel
Rated pressure times 6 min
1
1
/16 UNF (37° Flare to SAE
J514, size 6)
9
NPTF1/4 (ANSI B1.20 3-1976)
LINEARITY, HYSTERESIS, REPEATABILITY,
RESPONSE AND TEMPERATURE
ELECTRICAL
Supply voltage
Output
9 - 35v DC
9 - 35v DC
11- 35v DC
0 - 5v
1 - 6v
4 - 20mA
Transducer current draw = 8mA
Linearity:
Functional Temp Range:
(over any 80°C temp range)
<+/-0.05%
-40°C to +125°C
Hysteresis:
(over any 80˚C temp range)
<1%
(over any 80°C temp range)
<+/-0.05% Full Scale
Temperature error:
Stability:
Repeatability:
<0.1%FS after 1m Cycles
(over any 80°C temp range)
<+/-0.05% Full Scale
Response Time:
<1mS
Initial Calibration Accuracy:
WIRING INFORMATION
+/- 1% Zero
+/- 1% Span
Micro DIN Option
M12 Option
4
1
4
3
1
2
2
Micro DIN Option
Pin Number
1
2
4
Transmitter
N/A
Supply +ve
Return
M12 Option
Transducer
Signal Output
Supply +ve
Supply Ref (0v)
Pin Number
1
2
3
4
Transmitter
Supply +ve
Return
N/A
N/A
Transducer
Supply +ve
Supply Ref (0v)
Signal Output
Not Used
INSTALLATION DETAILS
Micro DIN option
M12 option
Flying lead option
M12 THREAD
26.5
Ø19.0
48.0
26.5
Ø19.0
53.0
47.5
26.5
22.0 A/F
22.0 A/F
ASIC ‘Performer’
Pressure Transducers and Transmitters
PREFERRED PRODUCTS TABLE
Pressure Transducers
Part Number
PTD.SB0201A1C1
PTD.SB0601A1C1
PTD.SB1001A1C1
PTD.SB2501A1C1
PTD.SB4001A1C1
PTD.SB7001A1C1
PTD.SB0201A1C2
PTD.SB0601A1C2
PTD.SB1001A1C2
PTD.SB2501A1C2
PTD.SB4001A1C2
PTD.SB7001A1C2
Description
0-20 bar transducer. (G1/4'' BSP) 1-6Vdc output. Micro DIN option.
0-60 bar transducer. (G1/4'' BSP) 1-6Vdc output. Micro DIN option.
0-100 bar transducer. (G1/4'' BSP) 1-6Vdc output. Micro DIN option.
0-250 bar transducer. (G1/4'' BSP) 1-6Vdc output. Micro DIN option.
0-400 bar transducer. (G1/4'' BSP) 1-6Vdc output. Micro DIN option.
0-700 bar transducer. (G1/4'' BSP) 1-6Vdc output. Micro DIN option.
0-20 bar transducer. (G1/4'' BSP) 1-6Vdc output. M12 Option.
0-60 bar transducer. (G1/4'' BSP) 1-6Vdc output. M12 Option.
0-100 bar transducer. (G1/4'' BSP) 1-6Vdc output. M12 Option.
0-250 bar transducer. (G1/4'' BSP) 1-6Vdc output. M12 Option.
0-400 bar transducer. (G1/4'' BSP) 1-6Vdc output. M12 Option.
0-700 bar transducer. (G1/4'' BSP) 1-6Vdc output. M12 Option.
Pressure Transmitters
Part Number
PTX.B0201A1C1
PTX.B0601A1C1
PTX.B1001A1C1
PTX.B2501A1C1
PTX.B4001A1C1
PTX.B7001A1C1
PTX.B0201A1C2
PTX.B0601A1C2
PTX.B1001A1C2
PTX.B2501A1C2
PTX.B4001A1C2
PTX.B7001A1C2
Note 1:
Description
0-20 bar transmitter. (G1/4'' BSP) 4-20mA. Micro DIN option.
0-60 bar transmitter. (G1/4'' BSP) 4-20mA. Micro DIN option.
0-100 bar transmitter. (G1/4'' BSP) 4-20mA. Micro DIN option.
0-250 bar transmitter. (G1/4'' BSP) 4-20mA. Micro DIN option.
0-400 bar transmitter. (G1/4'' BSP) 4-20mA. Micro DIN option.
0-700 bar transmitter. (G1/4'' BSP) 4-20mA. Micro DIN option.
0-20 bar transmitter. (G1/4'' BSP) 4-20mA. M12 option.
0-60 bar transmitter. (G1/4'' BSP) 4-20mA. M12 option.
0-100 bar transmitter. (G1/4'' BSP) 4-20mA. M12 option.
0-250 bar transmitter. (G1/4'' BSP) 4-20mA. M12 option.
0-400 bar transmitter. (G1/4'' BSP) 4-20mA. M12 option.
0-700 bar transmitter. (G1/4'' BSP) 4-20mA. M12 option.
For a flying lead assembly, select the appropriate M12 option above and add a suitable cable from the “Associated
Products” options below.
Example: PTX.B2505A1C2 + P.833PVC-2M = A 250 bar 4-20mA Transmitter, G1/4 for bonded seal, M12 connector with
2m PVC flying lead.
Note 2:
Integral Thread options are also available in the above ranges.
Pressure Transducers (PTD)
Pressure Transmitters (PTX)
A1
PTD
Connector Types
Pressure Transducer
(Voltage Output)
A1
PTX
Micro Din 43650
C1
M12
C2
O/P Combination
Connector Types
Pressure Transmitter
(4-20 mA Product)
Pressure Measurement
Bar
1-6V
S
0-5V
V
0.5 - 4.5 V Ratiometric
R
G1/4 (1/4BSPP)for bonded Seal
1
G1/4 (1/4 BSPP) + Integral Seal
2
Secondary Thread Forms
Pressure Measurement
Bar
C1
M12
C2
B
Primary Thread Forms
P
0.1 - 4.9 V
Micro Din 43650
1
G1/4 (1/4 BSPP) + Integral Seal
2
0 to 60
060
0 to 100
100
1
4
0 to 250
250
1
5
0 to 400
400
7/16 - 20 UNF
6
0 to 700
700
M12 x 1.5 Pitch with Spigot
Pressure Range - Bar
G1/4 (1/4BSPP)for bonded Seal
3
/8 NPT
Primary Thread Form
020
R1/4 (1/4 BSPT)
/4 NPT
B
Pressure Range - Bar
0 to 20
7
Secondary Thread Forms
R1/4 (1/4 BSPT)
3
1
4
1
5
7
6
M12 x 1.5 Pitch with Spigot
7
/4 NPT
/8 NPT
/16 - 20 UNF
0 to 20
020
0 to 60
060
0 to 100
100
M12 (IP68) Moulded Cable Options
0 to 250
250
2 Metre PVC
P.833PVC-2M
M12 (IP68) Moulded Cable Options
0 to 400
400
5 Metre PVC
P.833PVC-5M
2 Metre PVC
P.833PVC-2M
0 to 700
700
10 Metre PVC
P.833PVC-10M
5 Metre PVC
P.833PVC-5M
10 Metre PVC
P.833PVC-10M
Associated Products
Associated Products
Parker Hannifin UK Ltd
Filter Division Europe
Condition Monitoring Centre
Brunel Way, Thetford
Norfolk, IP24 1HP, UK
Phone: +44 (0) 1842 763299
Fax: +44 (0) 1842 756300
www.ucc.co.uk