TEMEX QEUM5350LT5016

FREQUENCY
QEUM5 / QEUM5-GW
UM5 Crystal – Through Hole & Gull Wing SMD packaged
Specification (Rev-C)
Electrical Characteristics ......................................................P01
ESR vs. frequency range and Mode of vibration ..................P01
Mechanical Characteristics ...................................................P01
Ordering Information .............................................................P02
QEUM5-GW Tape Drawing ..................................................P02
Frequency
QEUM5 / QEUM5-GW
UM5 Crystal – Through Hole & Gull Wing SMD packaged
October 03rd, 2006
Specification (rev-C)
Electrical Characteristics
Electrical Parameters
Unit
Frequency range
MHz
Minimum Typical Maximum
10
Test conditions
200
Frequency Tolerance (at 25°C) ± ppm
10
30
50
Refer to Ordering Information
± ppm
10
30
50
Refer to Ordering Information
-20/+70
-40/+85
Refer to Ordering Information
Temperature Stability
Operating Temperature Range
°C
Storage temperature range
°C
Shunt capacitance C0
pF
Load capacitance
pF
10pF ~ 32pF or series
Drive level
µW
100
-40
+85
7.0
± ppm
Aging (First Year)
MΩ
Insulator resistance
Refer to Ordering Information
500
3
Ref at 25°C
500
At 100VDC
Customized specification upon request
ESR vs. frequency range and Mode of vibration
Frequency range (MHz) Mode of vibration Max ESR (Ω) Frequency range (MHz) Mode of vibration Max ESR (Ω)
10.000 to 19.999
20.000 to 40.000
30.000 to 79.999
Fund.
Fund.
3rd
60
40
100
80.000 to 105.000
60.000 to 129.999
130.000 to 200.000
3rd
5th
7th
80
200
180
Mechanical Characteristics
QEUM5
Ø 0.35 ±
0.05mm
QEUM5-GW
H
6 max
[0.236]
L
3.2 max
[0.125]
1
TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost.
Frequency
QEUM5 / QEUM5-GW
UM5 Crystal – Through Hole & Gull Wing SMD packaged
October 03rd, 2006
Specification (rev-C)
Marking for QEUM5
Line 1 VRDxxx (Temex code)
Marking for QEUM5-GW
VRSxxx (Temex code)
Mechanical conditions
Vibration 10g, 10Hz to 2KHz
according to standard CEI
68-2-63
Shocks
100g, 6ms according to
standard CEI 68-2-27
Line 2 Frequency in MHz
Frequency in MHz
(6 digits)
(6 digits)
Line 3 YYWW – production code YYWW – production code
Note : QEUM5 & QEUM5-GW are
fully RoHS compliant.
Ordering Information
Part numbering system
HQ
QEUM5
1
30
Package type
Vibration
mode
Frequency
tolerance
1 = Fundamental
rd
3 = 3 Overtone
th
5 = 5 Overtone
th
7 = 7 Overtone
10=±10ppm
30=±30ppm
50=±30ppm
QEUM5 : UM5
Through Hole
packaged
QEUM5-GW : UM5
Gull Wing SMD
packaged
50
16
25.000MHZ
Operating
temperature
range
Frequency
stability
Load
Capacitance
Nominal
Frequency
(MHz)
D=-40°C
F= -30°C
H=-20°C
J=-10°C
L=0°C
M=+50°C
N=+55°C
O=+60°C
Q=+70°C
T=+85°C
10=±10ppm
30=±20ppm
50=±30ppm
16=16pF
Please enter the
nominal
frequency
Please, enter the
value of load
capacitance
QEUM5-GW Tape Drawing
Item
Pitch of components
Pitch of sprocket hole
Length from hole to
component center
Width of carrier tape
Width of adhesive tape
Gap of hold down tape
Diameter of feed hole
Diameter of sprocket hole
Symbol
P
PO
P1
Dimensions
12 ± 0.1
4 ± 0.1
2 ± 0.1
W
W1
W2
DO
D1
24 ± 0.3
11.5 ± 0.1
1.75 ± 0.1
Ø 1.5 min
Ø 1.5 ± 0.1
Note 1 : Metal Clips are opposed to the
the sprocket holes.
Note 2 : Multiple is 1Kpcs per reel.
2
TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost.