Qualtek 25Watts Single Output P P C Electronics Corporation QPD-25 Series Features: Universal AC input/ Full range No Load Power Consumption <0.5W Wide Operating Ambient Temperature (-20°C~70°C) High Efficiency, and High Reliability Output Protections: OLP/OVP/SCP All using 105°C long life electrolytic capacitors. 100% full load burn-in test Conformal Coating CB Model QPD-25-3.3 QPD-25-5 QPD-25-12 QPD-25-15 QPD-25-24 Output Characteristics DC Output 3.3V 5V 12V 15V 24V Rated Current 5A 5A 2.1A 1.6A 1.1A Current Range 0~5A 0~5A 0~2.1A 0~1.6A 0~1.1A Ripple and Noise (-20°C~70°C) <50mV <50mV <120mV <120mV <120mV Voltage ADJ. Range 3.0V~3.6V 4.4V~5.5V 10.0V~13.0V 13.8V~16.1V 20.7V~26.7V Voltage Accuracy ±2.0% ±2.0% ±1.0% ±1.0% ±1.0% Line Regulation ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% Load Regulation ±2.0% ±2.0% ±1.0% ±1.0% ±1.0% Set-up Time <2.0s (115VAC input, full load); <1.0s (230VAC input, full load) Hold-up Time >14ms (115VAC input, full load); >30ms (230VAC input, full load) Temperature Coefficient ±0.03%/°C Overshoot and Undershoot <5.0% Input Characteristics Voltage Range 88VAC~264VAC, 127VDC~370VDC Frequency Range 47Hz-63Hz Efficiency 115VAC Input 70% 76% 80% 82% 84% (Typical) 230VAC Input 71% 78% 82% 83% 85% AC Current (max) 0.7A 0.7A 0.7A 0.7A 0.7A Inrush Current (Typical) 20A@115VAC Cold start 40A@230VAC Cold start Leakage Current Input-Output: <0.25mA Input-PG: <0.75mA Protection Over Load (OLP) 105%~150% of rated output current, hiccup mode, auto recovery Over Voltage (OVP) 105%~150% of rated output voltage, constant voltage Short Circuit (SCP) Long-term mode, auto recovery Environmental Characteristics Operating Amb. Temp. & Hum -20°C~70°C; 20%~90% RH Non-Condensing Storage Temp. & Hum -40°C~85°C; 10%-95% RH Non-Condensing Safety Standards UL60950-1; EN60950-1: 2006 Withstand Voltage Primary-Secondary: 3.0KVAC;≤10mA. Primary-PG: 1.5KVAC;≤10mA. Secondary-PG: 0.5KVDC;≤10mA Isolation Resistance ≥100M ohms EMI Conduction & Radiation Compliance to EN55022(CISPR22) Class B Harmonic Current Compliance to EN61000-3-2,-3 EMS Immunity Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204, light industry level, criteria A General Characteristics Rev. C MTBF (MIL-HDBK-217F) More than 200,000Hrs (25°C, Full load) Dimension (LxWxH) 79x51x28.8mm Packing 48PCS/CTN. G.W: 10.4kgs Cooling Method Cooling by free air convection Page 1 of 2 Qualtek 25Watts Single Output Electronics Corporation P P C QPD-25 Series MECHANICAL SPECIFICATIONS 2-M3 2-M3 Pin No. 1 2 3 4 5 Assignment AC-L AC-N F.G DC output -V DC output +V UNIT: mm ISO-9001 Company www.qualtekusa.com Page 2 of 2