RB861Y Diodes Schottky barrier diode RB861Y zApplications High frequency detection zDimensions (Unit : mm) zLand size figure (Unit : mm) 㪇㪅㪌 㪇㪅㪉㪉㫧㪇㪅㪇㪌 㪈㪅㪉㫧㪇㪅㪈 㪈㪅㪌㪌 㪇㪅㪈㪊㫧㪇㪅㪇㪌 㪈㪅㪍㫧㪇㪅㪈 zFeatures 1) Ultra small mold type. (EMD4) 2) Low Ct and high detectionefficiency. 㪇㪅㪋㪌 㪈㪅㪍㫧㪇㪅㪈 㪈㪅㪇 㪇䌾㪇㪅㪈 㪜㪤㪛㪋 zConstruction Silicon epitaxial planar 㪇㪅㪌 zStructure 㪇㪅㪌 㪈㪅㪇㫧㪇㪅㪈 㪇㪅㪌㫧㪇㪅㪇㪌 ! 㩷 㪩㪦㪟㪤㩷㪑㩷㪜㪤㪛㪋 㪡㪜㪠㪫㪘㩷㪑㩷㪪㪚㪄㪎㪌㪘㩷㩷㪪㫀㫑㪼 㪻㫆㫋㩷㩿㫐㪼㪸㫉㩷㫎㪼㪼㫂㩷㪽㪸㪺㫋㫆㫉㫐㪀 zTaping specifications (Unit : mm) 㱢㪈㪅㪌㫧㪇㪅㪈 䇭䇭䇭䇭䇭㩷㩷㪇 㪉㪅㪇㫧㪇㪅㪇㪌 㪇㪅㪊㫧㪇㪅㪈 㪊㪅㪌㫧㪇㪅㪇㪌 zAbsolute maximum ratings (Ta=25qC) Parameter Symbol VR Reverse voltage IF Forward current Junction temperature Tj Storage temperature Tstg (*1) Rating of per diode 㱢㪇㪅㪏㫧㪇㪅㪈 㪋㪅㪇㫧㪇㪅㪈 㪈㪅㪍㪌㫧㪇㪅㪇㪈 㪇䌾㪇㪅㪈 㪈㪧㪠㪥 㪌㪅㪌㫧㪇㪅㪉 㪈㪅㪍㪌㫧㪇㪅㪈 㪈㪅㪎㫧㪇㪅㪇㪌 㪈㪅㪍㪌㫧㪇㪅㪈 㪏㪅㪇㫧㪇㪅㪉 㪈㪅㪎㪌㫧㪇㪅㪈 㪋㪅㪇㫧㪇㪅㪈 㪇㪅㪍㪌㫧㪇㪅㪈 Limits 5 10 125 -40 to +125 Unit V mA 㷄 㷄 zElectrical characteristics (Ta=25qC) Parameter Forward voltage Reverse current Capacitance between terminal Symbol VF IR Min. - Typ. - Max. 0.29 30 Unit V μA Ct - 0.85 1.10 pF Conditions IF=1mA VR=1V VR=0V , f=1MHz Rev.B 1/2 RB861Y Diodes zElectrical characteristic curves (Ta=25qC) 㪫㪸㪔㪈㪉㪌㷄 㪫㪸㪔㪄㪉㪌㷄 㪇㪅㪈 㪫㪸㪔㪉㪌㷄 㪇㪅㪇㪈 㪫㪸㪔㪎㪌㷄 㪇㪅㪇㪇㪈 㪽㪔㪈㪤㪟㫑 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥 㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫌㪘㪀 㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪝㩿㫄㪘㪀 㪈 㪫㪸㪔㪎㪌㷄 㪈㪇㪇 㪫㪸㪔㪉㪌㷄 㪈㪇 㪇㪅㪇㪇㪇㪈 㪫㪸㪔㪄㪉㪌㷄 㪈㪇㪇 㪉㪇㪇 㪊㪇㪇 㪝㪦㪩㪮㪘㪩㪛㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪝㩿㫄㪭㪀 㪭㪝㪄㪠㪝㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪋㪇㪇 㪇 㪉㪈㪇 㪈 㪉 㪊 㪋 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪩㩿㪭㪀 㪭㪩㪄㪠㪩㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪇 㪌 㪈㪐㪇 㪈㪏㪇 㪫㪸㪔㪉㪌㷄 㪭㪩㪔㪈㪭 㫅㪔㪊㪇㫇㪺㫊 㪐㪇 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫌㪘㪀 㪉㪇㪇 㪘㪭㪜㪑㪈㪏㪐㪅㪉㫄㪭 㪈㪎㪇 㪈㪍㪇 㪏㪇 㪎㪇 㪍㪇 㪌㪇 㪋㪇 㪊㪇 㪉㪇 㪌 㪘㪭㪜㪑㪎㪅㪏㫌㪘 㪈㪅㪏 㪈㪅㪎 㪈㪅㪍 㪘㪭㪜㪑㪈㪅㪏㪈㫇㪝 㪈㪅㪌 㪈㪅㪋 㪈㪅㪊 㪈㪅㪉 㪈㪅㪈 㪇 㪈 㪠㪩㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪫㪸㪔㪉㪌㷄 㪽㪔㪈㪤㪟㫑 㪭㪩㪔㪇㪭 㫅㪔㪈㪇㫇㪺㫊 㪈㪅㪐 㪈㪇 㪭㪝㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪈 㪉 㪊 㪋 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪩㩿㪭㪀 㪭㪩㪄㪚㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪉 㪈㪇㪇 㪫㪸㪔㪉㪌㷄 㪠㪝㪔㪈㫄㪘 㫅㪔㪊㪇㫇㪺㫊 㪈 㪇㪅㪈 㪈 㪇 㪝㪦㪩㪮㪘㪩㪛㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪝㩿㫄㪭㪀 㪈㪇 㪈㪇㪇㪇 㪫㪸㪔㪈㪉㪌㷄 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥 㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀 㪈㪇 㪚㫋㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪤㫆㫌㫅㫋㪼㪻㩷㫆㫅㩷㪼㫇㫆㫏㫐㩷㪹㫆㪸㫉㪻 㪠㪤㪔㪈㫄㪘 㪠㪝㪔㪈㪇㫄㪘 㪊㪇㪇 㪈㫄㫊 㫋㫀㫄㪼 㪩㫋㪿㩿㫁㪄㪸㪀 㪊㪇㪇㫌㫊 㪩㫋㪿㩿㫁㪄㪺㪀 㪈㪇㪇 㪈㪇 㪇㪅㪇㪇㪈 㪜㪣㪜㪚㪫㪩㪦㪪㪫㪘㪫㪠㪚 㪛㪛㪠㪪㪚㪟㪘㪩㪞㪜㩷㪫㪜㪪㪫㩷㪜㪪㪛㩿㪭㪀 㪫㪩㪘㪥㪪㪠㪜㪥㪫 㪫㪟㪘㪜㪩㪤㪘㪣㩷㪠㪤㪧㪜㪛㪘㪥㪚㪜㪑㪩㫋㪿㩷㩿㷄㪆㪮㪀 㪈㪇㪇㪇 㪉㪌㪇 㪉㪇㪇 㪈㪌㪇 㪈㪇㪇 㪇㪅㪈 㪈 㪈㪇 㪈㪇㪇 㪫㪠㪤㪜㪑㫋㩿㫊㪀 㪩㫋㪿㪄㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪈㪇㪇㪇 㪘㪭㪜㪑㪉㪋㪌㪭 㪚㪔㪉㪇㪇㫇㪝 㪩㪔㪇㱅 㪚㪔㪈㪇㪇㫇㪝 㪩㪔㪈㪅㪌㫂㱅 㪌㪇 㪇 㪇㪅㪇㪈 㪘㪭㪜㪑㪈㪏㪉㪭 㪜㪪㪛㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 Rev.B 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2008 ROHM CO.,LTD. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0