RB886G Diodes Schottky barrier diode RB886G zApplications High frequency detection zExternal dimensions (Unit : mm) zLand size figure (Unit : mm) 0.5 0.13±0.03 0.5 0.6±0.05 1.4±0.05 1.0±0.05 1.2 zFeatures 1) Small mold type. (VMD2) 2) Low Ct and high detection efficiency. VMD2 zConstruction Silicon epitaxial planar zStructure 0.27±0.03 0.5±0.05 ROHM : VMD2 dot (year week factory) zTaping specification (Unit : mm) 0.18±0.05 φ1.5+0.1 0 2±0.05 φ0.5 4±0.1 0.76±0.1 zAbsolute maximum ratings (Ta=25°C) Parameter Symbol VRm Reverse voltage VR Reverse voltage Forward current IF Junction temperature Tj Storage temperature Tstg zElectrical characteristics (Ta=25°C) Parameter Symbol VF Forward voltage IR Reverse current Capacitance between terminals Ct 8.0±0.3 0.1 0.4 2.1±0.1 1.11±0.05 3.5±0.05 1.75±0.1 4±0.1 0.3 2±0.05 Limits 15 5 10 125 -40 to +125 0.65±0.05 Unit V V mA ℃ ℃ Min. - Typ. - Max. 0.35 120 Unit V µA - 0.53 0.8 pF Conditions IF=1mA VR=5V VR=1V , f=1MHz Rev.A 1/2 RB886G Diodes zElectrical characteristic curves (Ta=25°C) 10 1 1000 1 Ta=-25℃ Ta=25℃ Ta=75℃ 0.1 Ta=125℃ Ta=75℃ 100 Ta=25℃ Ta=-25℃ 10 0.01 0.1 1 300 600 900 1200 FORWARD VOLTAGE：VF(mV) VF-IF CHARACTERISTICS 1500 0 300 1 2 3 4 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS REVERSE CURRENT:IR(uA) 280 270 260 Ta=25℃ VR=5V n=30pcs 250 200 150 100 AVE:21.63uA 50 0 250 VF DISPERSION MAP 1000 Mounted on epoxy board IM=10mA IF=100mA time 300us 0.7 0.6 0.5 0.4 AVE:0.520pF 0.3 0.2 1 10 100 TIME:t(s) Rth-t CHARACTERISTICS 1000 Ct DISPERSION MAP 4 3 AVE:1.47kV 2 AVE:0.48kV 1 0 0.1 0.8 5 ELECTROSTATIC DDISCHARGE TEST ESD(KV) TRANSIENT THAERMAL IMPEDANCE:Rth (℃/W) Rth(j-c) 0.01 Ta=25℃ f=1MHz VR=1V n=10pcs 0.9 0 IR DISPERSION MAP Rth(j-a) 1ms 5 0.1 AVE:275.2mV 100 1 2 3 4 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 1 300 Ta=25℃ IF=1mA n=30pcs 290 10 0.001 0 5 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 0 FORWARD VOLTAGE:VF(mV) CAPACITANCE BETWEEN TERMINALS:Ct(pF) REVERSE CURRENT:IR(uA) FORWARD CURRENT:IF(mA) f=1MHz Ta=125℃ C=200pF R=0Ω C=100pF R=1.5kΩ ESD DISPERSION MAP Rev.A 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1