www.DataSheet4U.com RCWPM (Military M/D55342) Vishay Dale Thick Film Chip Resistors, Military/Established Reliability MIL-PRF-55342 Qualified, Type RM FEATURES • Fully conforms to the requirements of MIL-PRF-55342 • Established reliability - Verified failure rate; M, P, R, S & T levels • Operating temperature range is - 55 °C to + 150 °C • 100 % Group A screening per MIL-PRF-55342 • Termination Style B - Tin/Lead wraparound over nickel barrier STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL MIL SPEC. SHEET MIL-PRF-55342 STYLE POWER RATING P70 °C W TERM. MAXIMUM OPERATING VOLTAGE TOLERANCE % CHAR. ± 2 to ± 10 ±1 ± 2 to ± 10 RCWPM-5100 RM1005 03 B 0.10 40 K, M ±1 ± 2 to ± 10 RCWPM-5150 RM1505 04 B 0.15 40 K, M ±1 ± 2 to ± 10 RCWPM-7225 RM2208 05 B 0.225 40 K, M ±1 ± 2 to ± 10 RCWPM-575 RM0705 06 B 0.10 50 K, M ±1 ± 2 to ± 10 RCWPM-1206 RM1206 07 B 0.25 100 K, M ±1 ± 2 to ± 10 RCWPM-2010 RM2010 08 B 0.80* 150 K, M ±1 ± 2 to ± 10 RCWPM-2512 RM2512 09 B 1.0* 200 K, M ±1 ± 2 to ± 10 RCWPM-1100 RM1010 10 B 0.50* 75 K, M ±1 ± 2 to ± 10 RCWPM-0402 RM0402 11 B 0.04 25 K, M ±1 ± 2 to ± 10 RCWPM-0603 RM0603 12 B 0.07 50 K, M ±1 * Power rating based on a ceramic test board, see appropriate Mil Slash Sheet for power ratings based on a fiber test board. RCWPM-550 RM0505 02 B 0.055 40 K, M RESISTANCE RANGE Ω 5.6 - 1M 5.62 - 1M 5.6 - 1M 5.62 - 1M 5.6 - 4.7M 5.62 - 4.75M 5.6 - 15M 5.62 - 15M 5.6 - 1M 5.62 - 1M 5.6 - 5.6M 5.62 - 5.62M 5.6 - 15M 5.62 - 15M 5.6 - 15M 5.62 - 15M 5.6 - 5.6M 5.62 -5.62M 5.6 - 1M 5.62 - 1M 5.6 - 1M 5.62 - 1M GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M55342M02B10E0RWB (preferred part numbering format) M 5 5 3 4 2 M MIL STYLE CHARACTERISTIC SPEC SHEET D55342 applies to K = 100 ppm (see Standard Style 07 (RM1206) M = 300 ppm Electrical only. Specifications table) M55342 applies to all other styles. 0 2 TERMINATION STYLE B = Pre-tinned Nickel Barrier, wraparound B 1 0 VALUE & TOLERANCE (see Tolerance and Multipliers table E 0 M MIL STYLE CHARACTERISTIC www.vishay.com 90 02 SPEC SHEET B TERMINATION STYLE W B FAILURE RATE C = Non-ER M = 1.0 %/1000 hours P = 0.1 %/1000 hours R = 0.01 %/1000 hours S = 0.001 %/1000 hours T = Space Level PACKAGING TP = Tin/Lead, T/R (Full) S3 = Tin/Lead, T/R (1000 pcs) WB = Tin/Lead, Tray S2 = Tin/Lead, T/R (500 pcs) S6 = Tin/Lead, T/R (300 pcs) 10E0 R Historical Part Numbering: M55342M02B10E0R (will continue to be accepted) M55342 R VALUE & TOLERANCE For technical questions, contact: [email protected] SPECIAL Blank = Standard (Dash Number) (up to 1 digit) T = Space Level (- 98) WB FAILURE RATE PACKAGING CODE Document Number: 31010 Revision: 30-Aug-06 www.DataSheet4U.com RCWPM (Military M/D55342) Thick Film Chip Resistors, Military/Established Reliability MIL-PRF-55342 Qualified, Type RM Vishay Dale DIMENSIONS in inches [millimeters] D C B A E DIMENSIONS in inches [MILLIMETERS] MIL-PRF-55342 STYLE MIL. SPEC. SHEET RCWPM-550 RM0505 02 RCWPM-5100 RM1005 03 RCWPM-5150 RM1505 04 RCWPM-7225 RM2208 05 RCWPM-575 RM0705 06 RCWPM-1206 RM1206 07 RCWPM-2010 RM2010 08 RCWPM-2512 RM2512 09 RCWPM-1100 RM1010 10 RCWPM-0402 RM0402 11 RCWPM-0603 RM0603 12 RATED POWER IN % VISHAY DALE MODEL A (Length) B (Width) C (Height) D (Top Term) E (Bottom Term) 0.055 ± 0.005 [1.40 ± 0.13] 0.105 ± 0.005 [2.67 ± 0.13] 0.155 ± 0.005 [3.94 ± 0.13] 0.230 ± 0.005 [5.84 ± 0.13] 0.080 ± 0.005 [2.03 ± 0.13] 0.125± 0.005 [3.18 ± 0.13] 0.197 ± 0.006 [5.00 ± 0.15] 0.250 ± 0.006 [6.35 ± 0.15] 0.105 ± 0.005 [2.67 ± 0.13] 0.039 ± 0.003 [0.99 ± 0.08] 0.063 ± 0.005 [1.60 ± 0.13] 0.050 ± 0.005 [1.27 ± 0.13] 0.050 ± 0.005 [1.27 ± 0.13] 0.050 ± 0.005 [1.27 ± 0.13] 0.075 ± 0.005 [1.91 ± 0.13] 0.050 ± 0.005 [1.27 ± 0.13] 0.063 ± 0.005 [1.60 ± 0.13] 0.098 ± 0.005 [2.49 ± 0.13] 0.124 ± 0.005 [3.15 ± 0.13] 0.100 ± 0.005 [2.54 ± 0.13] 0.020 ± 0.003 [0.51 ± 0.08] 0.032 ± 0.005 [0.81 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.013 ± 0.003 [0.33 ± 0.08] 0.018 ± 0.005 [0.46 ± 0.13] 0.010 ± 0.005 [0.25 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.010 ± 0.005 [0.25 ± 0.13] 0.012 ± 0.005 [0.31 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.010 ± 0.005 [0.25 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 120 100 80 60 CAGE CODE: 91637 and SH903 40 20 0 - 55 - 25 0 25 50 Derating 75 100 125 150 175 70 AMBIENT TEMERATURE IN °C RESISTANCE TOLERANCE AND MULTIPLIERS TOLERANCE ±1% D E F Examples: Document Number: 31010 Revision: 30-Aug-06 ±2% G H T ±5% J K L 11D3 = 11.3 Ω ± 1 % 10E0 = 10 kΩ ± 1 % 332D = 332 Ω ± 1 % 2F21 = 2.21 MΩ ± 1 % 51G0 = 51 Ω ± 2 % 10H0 = 10 kΩ ± 2 % 33H0 = 33 kΩ ± 2 % 22T0 = 22 MΩ ± 2 % ± 10 % M N P MULTIPLIER 1 1000 1 000 000 15J0 = 15 Ω ± 5 % 10K0 = 10 kΩ ± 5 % 560K = 560 kΩ ± 5 % 8L20 = 8.2 MΩ ± 5 % 10M0 = 10 Ω ± 1 0% 10N0 = 10 kΩ ± 10 % 2P70 = 2.7 MΩ ± 10 % 8P20 = 8.2 MΩ ± 10 % For technical questions, contact: [email protected] VALUE RANGE (OHMS) 1 - 9xx 1k - 9xxk 1M - 10M www.vishay.com 91 www.DataSheet4U.com Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1