19-0887; Rev 1; 8/99 +5V, +10V Precision Voltage References The REF01 and REF02 are precision voltage references that are pretrimmed to within ±3% of +10V and +5V, respectively. Both references feature excellent temperature stability (as low as 8.5 ppm/°C worst case), low current drain, and low noise. The REF02 also provides a TEMP pin whose output voltage varies linearly with temperature, making this device suitable for a wide variety of temperature-sensing and control applications. Both devices are available from Maxim in the space-saving SO package, as well as in the standard 8-pin TO-99 and MINI-DIP packages. Features ♦ Pretrimmed to +5V, +10V ±0.3% ♦ Excellent Temperature Stability: 3ppm/°C ♦ Low Noise: 10µVp-p (REF02) ♦ Low Supply Current: 1.4mA max ♦ Short-Circuit Proof ♦ Linear Temperature Transducer O/P (REF02) Ordering Information REF01EP 0°C to +70°C MAX TEMPCO (ppm/°C) 8.5 REF01EZ REF01HP REF01HSA 0°C to +70°C 0°C to +70°C 0°C to +70°C 8.5 25 25 ±30 ±50 ±50 8 CERDIP 8 Plastic DIP 8 SO 0°C to +70°C 0°C to +70°C 0°C to +70°C -40°C to +85°C -55°C to +125°C 65 65 65 65 25 ±100 ±100 ±100 ±100 ±50 8 Plastic DIP 8 SO 8 CERDIP 8 SO 8 CERDIP REF02EP REF02EZ REF02HP 0°C to +70°C 0°C to +70°C 0°C to +70°C 8.5 8.5 25 ±15 ±15 ±25 8 Plastic DIP 8 CERDIP 8 Plastic DIP REF02HSA 0°C to +70°C 25 ±25 8 SO REF02CP 0°C to +70°C 65 ±50 8 Plastic DIP REF02CSA 0°C to +70°C 65 ±50 8 SO REF02CZ 0°C to +70°C 65 ±50 8 CERDIP REF02CESA -40°C to +85°C 65 ±50 8 SO REF02Z -55°C to +125°C 25 ±25 8 CERDIP PART REF01CP REF01CSA REF01CZ REF01CESA REF01Z TEMP. RANGE INITIAL ERROR (mV) ±30 PIN-PACKAGE 8 Plastic DIP Ordering Information continued at end of data sheet. Applications __________Typical Operating Circuit A to D Converters D to A Converters Digital Voltmeters Voltage Regulators Threshold Detectors Reference with Trimmed Output ________________________________________________________________ Maxim Integrated Products 1 For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800. For small orders, phone 1-800-835-8769. REF01/REF02 General Description REF01/REF02 +5V, +10V Precision Voltage References ABSOLUTE MAXIMUM RATINGS—REF01 Input Voltage REF01, A, E, H, All DICE ...................................................40V REF01C .............................................................................30V Power Dissipation T099 (J) (derate at 7.1mW°C above 80°C) .................500mW CERDIP (2) (derate at 6.7mW/°C above 75°C) ...........500mW Plastic Dip (P) (derate at 5.6mW/°C above 36°C) ......500mW Small Outline (S) (derate at 5.0mW/°C above 55°C) ..300mW Output Short-Circuit Duration (to ground or VIN) .....................................................Indefinite Storage Temperature Range .............................-65°C to +150°C Operating Temperature Range REF01A, REF01 ............................................-55°C to +125°C REF01E, REF01H, REF01C (except REF01CESA) ..................................0°C to +70°C REF01CESA ....................................................-40°C to +85°C DICE Junction Temperature (Tj) ........................-65°C to +150°C Lead Temperature (soldering, 60s) .................................+300°C Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS—REF01 (VIN = +15V, TA = +25°C, unless otherwise noted.) ELECTRICAL CHARACTERISTICS—REF01 (VIN = +15V, -55°C ≤ TA = +125°C for REF01A and REF01, 0°C ≤ TA ≤ +70°C for REF01E and REF01H, IL = 0mA, unless otherwise noted.) 2 _______________________________________________________________________________________ +5V, +10V Precision Voltage References REF01/REF02 ELECTRICAL CHARACTERISTICS—REF01 (continued) (VIN = +15V, TA = +25°C, unless otherwise noted.) ELECTRICAL CHARACTERISTICS—REF01 (VIN = +15V, TA = TMIN to TMAX, unless otherwise noted.) Output Adjustment The REF01 trim terminal can be used to adjust the voltage over a 10V±300mV range. This feature allows the system designer to trim system errors by setting the reference to a voltage other than 10V, including 10.240V for binary applications (see the Typical Operating Circuit section). Adjustment of the output does not significantly affect the temperature performance of the device. The temperature coefficient change is approximately 0.7ppm/°C for 100mV of output adjustment. _______________________________________________________________________________________ 3 REF01/REF02 +5V, +10V Precision Voltage References ABSOLUTE MAXIMUM RATINGS—REF02 Input Voltage REF02, A, E, H, All DICE ...................................................40V REF02C, D..........................................................................30V Power Dissipation T099 (J) (Derate at 7.1mW°C above 80°C).................500mW CERDIP (2) (Derate at 6.7mW°C above 75°C) ...........500mW Plastic Dip (P) (Derate at 5.6mW°C above 36°C) .......500mW Small Outline (S) (Derate at 5.0mW°C above 55°C) ...300mW Storage Temperature Range .............................-65°C to +150°C Operating Temperature Range REF02A, REF02 ............................................-55°C to +125°C REF02E, REF02H (Except REF02CESA) ........0°C to +70°C REF02C (except REF02CESA), REF02D ...........0°C to +70°C REF02CESA ........................................................-40°C to +85°C Lead Temperature (Soldering, 60s).................................+300°C DICE Junction Temperature (Tj) ........................-65°C to +150°C Output Short-Circuit Duration (to Ground or VIN).....................................................Indefinite Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS—REF02 (VIN = +15V, TA = +25°C, unless otherwise noted.) ELECTRICAL CHARACTERISTICS—REF01 (VIN = +15V, -55°C ≤ TA = +125°C for REF02A and REF02, 0°C ≤ TA ≤ +70°C for REF02E and REF02H, IL = 0mA, unless otherwise noted.) 4 _______________________________________________________________________________________ +5V, +10V Precision Voltage References REF01/REF02 ELECTRICAL CHARACTERISTICS—REF02 (VIN = +15V, TA = +25°C, unless otherwise noted.) ELECTRICAL CHARACTERISTICS—REF02 (VIN = +15V, TA = TMIN to TMAX and IL = 0mA, unless otherwise noted.) Output Adjustment The REF02 trim terminal can be used to adjust the output voltage over a 5V±300mV range. This feature allows the system designer to trim system errors by setting the reference to a voltage other than 5V (refer to the Typical Operating Circuit section). Adjustment of the output does not significantly affect the temperature performance of the device. Typically, the temperature coefficient change is 0.7ppm/°C for 100mV of output adjustment. Temperature Voltage Output The REF02 provides a temperature-dependent output voltage on the TEMP pin. This voltage is proportional to the absolute temperature, and has a scale factor of approximately 2.1mV/°C (Figure 2). Output Voltage = 2.1(T + 273)mV where T = Temperature in °C Figure 2. REF02 Temperature/Voltage Output vs. Temperature _______________________________________________________________________________________ 5 +5V, +10V Precision Voltage References REF01/REF02 Typical Operating Characteristics 6 _______________________________________________________________________________________ +5V, +10V Precision Voltage References Figure 3. Precision Calibration Standard Figure 4. ±10V Reference Figure 5. Current Source Figure 6. Precision Temperature Transducer with Remote Sensor Chip Topography _______________________________________________________________________________________ 7 REF01/REF02 Typical Applications REF01/REF02 +5V, +10V Precision Voltage References Ordering Information (continued) REF01EJ* 0°C to +70°C MAX. TEMPCO (ppm/°C) 8.5 REF01HF* REF01CJ* REF01HZ* REF01CP-2* 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C 25 65 25 65 ±50 ±100 ±50 ±100 8 TO-99 8 TO-99 8 Hermetic DIP 8 Plastic DIP REF01AJ* REF01J* REF01AZ* -55°C to +125°C -55°C to +125°C -55°C to +125°C 8.5 25 8.5 ±30 ±50 ±15 8 TO-99 8 TO-99 8 Hermetic DIP REF02EJ* REF02HJ* REF02CJ* 0°C to +70°C 0°C to +70°C 0°C to +70°C 8.5 25 65 ±15 ±25 ±50 8 TO-99 8 TO-99 8 TO-99 REF02DJ* REF02HZ* REF02DP* 0°C to +70°C 0°C to +70°C 0°C to +70°C 250 25 250 ±100 ±25 ±100 8 TO-99 8 Hermetic DIP 8 Plastic DIP PART REF02DSA* TEMP. RANGE INITIAL ERROR (mV) ±30 PIN-PACKAGE 8 TO-99 0°C to +70°C 250 ±100 8 SO REF02AJ* -55°C to +125°C 8.5 ±15 8 TO-99 REF02J* -55°C to +125°C 25 ±25 8 TO-99 REF02AZ* -55°C to +125°C 8.5 ±15 8 Hermetic DIP *Contact factory for availability. Pin Configuration *NOTE: Pin 3 is N.C. (No Connection) on REF01, TEMP Output on REF02. Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 8 _____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 © 1999 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.