Model RFP-30N50T-S RoHS Compliant Aluminum Nitride Termination 30 Watts, 50Ω General Specifications Resistive Element Substrate Cover Lead(s) Operating Temperature Thick film Aluminum Nitride ceramic Alumina ceramic 99.9% pure silver (.005” thick) -55 to +150°C (see de rating chart) Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Electrical Specifications Features: • 30 Watts • DC – 4.0 GHz • Aluminum Nitride Ceramic • Welded Silver Leads Resistance Value: Power: Frequency Range: V.S.W.R. 50 Ohms, ± 5% 30 Watts DC – 4.0 GHz 1.25:1 Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Operating temperature is -55ºC to +150ºC (see chart) Specifications subject to change. • Non-Nichrome Resistive Element • 100% Tested • RoHS Compliant Outline Drawing Dimensions inches 30N50T-S (097) Rev C Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model RFP-30N50T-S RoHS Compliant Typical Performance: Derating: Mounting Footprint and Procedure: 30N50T-S (097) Rev C USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing.