GULFSEMI RG1J

RG1J
SINTERED GLASS JUNCTION
FAST SWITCHING RECTIFIER
VOLTAGE: 600V
CURRENT: 1.0A
FEATURE
SOD-57
High temperature metallurgically bonded construction
Sintered glass cavity free junction
Capability of meeting environmental standard of
MIL-S-19500
High temperature soldering guaranteed
350°C /10sec/0.375”lead length at 5 lbs tension
Operate at Ta =55°C with no thermal runaway
Fast switching for high efficiency
MECHANICAL DATA
Case: SOD-57 sintered glass case
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Polarity: color band denotes cathode end
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
SYMBOL
RG1J
units
Maximum Recurrent Peak Reverse Voltage
Vrrm
600
V
Maximum RMS Voltage
Vrms
420
V
Maximum DC blocking Voltage
Vdc
600
V
Maximum Average Forward Rectified Current 3/8”lead
length at Ta =55°C
Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load
Maximum Forward Voltage at rated Forward Current
and 25°C
Maximum full load reverse current full cycle average
0.375”(9.5MM) lead length at Ta=100°C
Maximum DC Reverse Current
Ta =25°C
at rated DC blocking voltage
Ta =125°C
If(av)
1.0
A
Ifsm
30
A
Vf
1.3
V
Ir(av)
100
µA
Ir
2.0
100
µA
Typical Reverse Recovery Time
(Note 1)
Trr
200
nS
Typical Junction Capacitance
(Note 2)
Cj
15
pF
Typical Thermal Resistance
(Note 3)
Rth(ja)
55
°C /W
Tstg, Tj
-65 to +175
°C
Storage and Operating Temperature Range
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
Rev.A1
www.gulfsemi.com
RATINGS AND CHARACTERISTIC CURVES RG1J
Rev.A1
www.gulfsemi.com