RGB-3003 3-Fiber VGA 200 MHz Hi-Resolution 200 MHz VGA/RGB Video System For Ultra High Resolution Remote Displays The RGB-3003 is a three-fiber Amplitude Modulated (AM), LED- or Laser-based RGB Video transmission system with a 15 Pin VGA interface port, which provides H/V Sync or Composite External Sync or Sync on Green or all three channels. It is ideal for the extension of any high resolution Video signal such as a CAD/CAM graphics workstation. Units come with a built-in Automatic Gain Control (AGC) to maintain constant Video output for each color. System Design Status indicators for: Power On, VGA H/V Sync present. All units come as a Stand Alone version. Units can be rack-mountable with optionally provided brackets for a flat surface such as a desk top in a cabinet, or mounted in a 19” Rack. RGB-3003 unit comes with internal 87264 VAC power supply that operates with a selectable power supply. The regulated switching power supply has short circuit protection, and an input operating voltage of 110/220 VAC. Features The RGB-3003 is also available in Y, Pb and Pr format system configuration. • Stand Alone or Mounting Brackets 865 1310 • • • 1550 Type Mode Wavelength Suffix LED MM L0 Laser SM L2 • Ultra-high resolution (1840 x 1634) • Multimode operation over 3 fibers • 200 MHz video bandwidth • Complies with RS-170, RS-170A & RS-343 EIA standards • VGA/SVGA • No EMI or RFI and no ground loops • Ideal for CAD/CAM workstation extensions Output Power Receiver Sensitivity Optical Loss Budget Range* Conn Type 50 /125µ -13 dBm -20 dBm 7 dB 1 km ST 62.5/125µ -10 dBm -20 dBm 10 dB 2 km ST 09/125µ -8 dBm -16 dBm 8 dB 8 km FC Fiber Type * Chromatic dispersion and additional losses should be taken into account 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice RGB/VGA/DVI Video Video in/out impedance Video in/out level Video bandwidth Grayscale linearity distortion Pixel intensity distortion Linearity Tilt Maximum horizontal frequency Maximum refresh rate Signal to noise ratio Connector type General Dimensions & Weight Material Operating temperature Storage temperature Humidity Operating voltage Vibration Shock 75 Ω 1 volt peak to peak, 0.7 volts without sync 10 Hz to 200 MHz @ -3dB < 2.0 % typical < 2.0° typical ± 1.1 % typical ≤ 0.5 % typical 128 KHz 120 KHz >55 dB using RS-250C standards @ 1 km BNC 13.75” L x 8.50” W x 1.65” H Aluminum casing -20° C to +70° C -30° C to +85° C 0 to 95% non-condensing 110/220 VAC Up to 5 g's Up to 12 g's Diagnostics Status monitoring 39 oz Optiva™™Configurable Multi-Signal Optiva Transmission Platform Platform Communication Network Management Management Network SDI HD-SDI SDIand & HD-SDI Composite Video, Video, Composite Audio & & Data Data Audio Audio/FSK/Intercom RGB/VGA/DVI RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) (Ethernet/Serial/USB) Data CATV/RF & & L-Band L-Band CATV/RF Optical Switching, Switching, Routing Routing Optical & Redundancy & Redundancy Passive Multiplexing Multiplexing Passive Solutions Solutions Enclosures, Racks Racks Enclosures, & Frames Frames & Power Supplies Supplies Power and Accessories & Accessories LED indication MADE IN THE USA Sample Configuration