HIGH VALUE & HIGH VOLTAGE CYLINDRICAL RESISTORS RG SERIES - General Purpose RH SERIES - High Precision RP SERIES - Professional Grade RoHS OPTIONS Options include formed leads, matched sets, custom marking, burn-in, vacuum/space operation, custom sizes, etc. Opt. P = high pulse design, Opt.H= increased voltage, Opt.B=increased power, Opt.58=hermetic seal. 1.35” min (1.06” on ← L → d ±.004 → D ← 1/2W and smaller) ↓ ↑ 1 UUUUU UUUUU Industry’s widest range of high value/ high voltage resistors1/8 ~ 20W, 1KΩ~ 1013Ω, 300V~ 90KV, TC’s to ±15ppm, ±0.05%~ 10% Available on Tape & Reel (sizes <2.5” long) RESISTORSCAPACITORSCOILSDELAY LINES Term.W is RoHS compliant & 260°C compatible Internal construction of RP Series (non-inductive serpentine film) RCD’s high voltage thick-film resistors represent the most advanced technology in the industry. Series RG is designed for semi-precision applications, offering a low cost solution up to 15KV. Series RH features a special composition and processing to achieve improved tolerance, TC, & voltage (60KV). Series RP utilize highest grade materials enabling tightest tolerances, lowest VC’s, TC’s to 15ppm, and superior power/temp/voltage levels (90KV). RP utilize serpentine film pattern for lowest inductance. Units are printed or banded with resistance value and tolerance as minimum. The ruggedness of these models enables superior long term reliability, especially in demanding applications such as military, space, and medical equipment, as well as electron microscopes, high impedance amplifiers, electrometer, radiation testers, etc. RG Series RG1/8 RG1/4 RG1/2 RG1S RG1 RG2 RG3 RG4 Wattage @ 25°C 1/8W 1/4W 1/2W 1W 1W 2W 3W 4W Voltage Rating* 300V 500V 1K V 1.5KV 2K V 5K V 10K V 15K V Dielectric Strength 500V 500V 500V 500V 1K V 1K V 1K V 1K V Dimensions Inch [mm] L D .134 ±.04 [3.4±1.0] .067 ±.025 [1.7 ± 0.64] .256 ±.04 [6.5±1.0] .098 ±.025 [2.5 ± 0.64] .368 ±.04 [9.4±1.0] .134 ±.032 [3.4 ± 0.81] .472 ±.05 [12.0±1.3] .158 ±.032 [4.0 ± 0.81] .581 ±.05 [14.8±1.3] .216 ±.032 [5.5 ± 0.81] 1.06 ±.062 [26.9±1.6] .275 ±.032 [7.0 ± 0.81] 1.67 ±.062 [42.4±1.6] .275 ±.032 [7.0 ± 0.81] 2.05 ±.062 [52.1±1.6] .335 ±.032 [8.5 ± 1.02] RH Series RH1/8 RH1/4 RH1/2 RH1 RH2 RH3 RH4 RH6 RH10 RH16 Wattage @ 25°C 1/8W 1/4W 1/2W 1W 2W 3W 4W 6W 10W 16W Voltage Rating* 500V 750V 1500V 2000V 5000V 10K V 15K V 20K V 35K V 60K V Dielectric Strength 500V 500V 500V 1K V 1K V 1K V 1K V 1K V 1K V 1K V L .240±.04 [6.1±1.0] .354±.04 [9.0±1.0] .500±.04 [12.7±1.0] .571±.04 [14.5±1.0] 1.00±.08 [25.4±2.0] 1.65±.08 [41.9±2.0] 2.05±.08 [52.1±2.0] 3.03±.08 [77±2.0] 4.70±.12 [119.4±3.1] 7.48±.12 [190±3.1] Dimensions Inch [mm] D .085±.025 [2.16±0.6] .118±.04 [3.00±1.0] .180±.04 [4.57±1.0] .180±.04 [4.57±1.0] .265±.05 [6.73±1.3] .265±.05 [6.73±1.3] .320±.05 [8.13±1.3] .320±.05 [8.13±1.3] .320±.05 [8.13±1.3] .320±.05 [8.13±1.3] RH2 is available in 400ppm TCR from 100G to 300G, 300G-600G is 1000ppm, 600G-3T is 1500ppm 2 d .020 [.5] .024 [.6] .025 [.64] .028 [.7] .031 [.8} .031 [.8} .031 [.8} .040 [1] 25p p m N/A N/A N/A N/A N/A N/A N/A N/A d 0.024 [.6] 0.024 [.6] 0.031 [.8] 0.031 [.8] .031/.04 [.8/1] .031/.04 [.8/1] .031/.04 [.8/1] .031/.04 [.8/1] .031/.04 [.8/1] 0.04 [1.0] Standard Resistance Range**(K=103, M=106, G=109) 50p p m 100p p m 200p p m 350p p m 1M-10M 1M-300M 1M-300M 1M-300M 100K-50M 100K-3G 100K-3G 100K-3G 100K-50M 100K-3G 100K-3G 100K-3G 200k-50M 200K-100M 200K-300M 200K-300M 200k-50M 200K-100M 200K-500M 200K-500M N/A ** ** 1M-1.5G N/A ** ** 1M-1.5G N/A ** ** 1M-1.5G Standard Resistance Range** (K=103,M=106,G=109,T=1012) 25p p m 50p p m 100p p m 200p p m ≥ 400p p m 100K-50M 50K-100M 10K-100M 10K-500M 500M-4G 100K-100M 100K-100M 10K-300M 10K-1G 1G-5G 100K-100M 100K-100M 100K-1G 100K-5G 1G-5G 100K-100M 100K-500M 100K-2G 100K-15G 15G-50G 100K-100M 100K-500M 100K-2G 100K-100G 100G-3T 1 100K-100M 100K-500M 100K-2G 100K-100G 100G-10T 2 100K-500M 100K-2G 100K-10G 500K-500M 500K-2G 100K-10G 1M-500M 1M-2G 100K-10G 1M-500M 1M-2G 100K-10G - RH3 is available in 400ppm TCR from 100G-600g, 600G-1T is 1000ppm, 1T-10T is 1500ppm RP Wattage Voltage Dielectric Dimensions Inch [mm] Standard Resistance Range**(K=103, M=106, G=109) Series @ 40°C Rating* Strength L D d 15p p m 25p p m 50p p m 100p p m 200p p m RP4 3.8W 15K V 1K V 1.063±.04 [27.0±1.0] .315 ±.025 [8.0±.64] .031 [.79] 1K - 1G 1K - 10G 1K - 10G 1K - 10G 1K - 10G RP5 5W 21K V 1K V 1.457±.04 [37.0±1.0] .315 ±.025 [8.0±.64] .031 [.79] 1K - 1G 1K - 15G 1K - 15G 1K - 15G 1K - 15G RP8 7.5W 30K V 1K V 2.047±.05 [52.0±1.3] .315 ±.025 [8.0±.64] .031 [.79] 1K - 1G 1K - 20G 1K - 20G 1K - 20G 1K - 20G RP10 10W 45K V 1K V 3.071±.06 [78.0±1.5] .315 ±.025 [8.0±.64] .031 [.79] 1K - 1G 1K - 30G 1K - 30G 1K - 30G 1K - 30G RP14 13.5W 60K V 1K V 4.000±.06 [101.6±1.5] .315 ±.025 [8.0±.64] .031 [.79] 1K - 1G 1K - 40G 1K - 40G 1K - 40G 1K - 40G RP16 16W 72K V 1K V 4.800±.06 [121.9±1.5] .315 ±.025 [8.0±.64] .031 [.79] 1K - 1G 1K - 50G 1K - 50G 1K - 50G 1K - 50G RP20 20W 90K V 1K V 5.984±.06 [152.0±1.5] .315 ±.025 [8.0±.64] .031 [.79] 1K - 1G 1K - 60G 1K - 60G 1K - 60G 1K - 60G * Maximum working voltage is DC or AC RMS (50-60Hz sinusoidal) and is determined by E= (PR)1/2, E not to exceed value listed in column above. **Consult factory for res. values outside the standard range CUSTOM DESIGNS SPECIFICATIONS (Typ.) Increased Ratings - increased power and voltage ratings are available with special processing. By specifying Opt.H on RG series, voltage ratings are increased by 100% (by 50% on sizes 2W-4W). Matched Sets and Networks - cost savings up to 50% can often be achieved by specifying tight matching requirements instead of tight tol. and TC reqts. Resistance matching to 0.02% and TC tracking to 5ppm is available. Threaded Terminations - resistors are available with tapped end caps for series combination into virtually any voltage or resis. value. Hermetic-Sealed Construction (Opt. 58) - Available on RH1, RH2, & RH3 for use in harshest environments. Add .08” to dia. & .18” to length. RH2 Tolerances Coating Inductance RH Series RP Series -55 to +155°C* -55 to +225°C* 1%-10%, 0.1% avail 0.1%-5% 0.05%-5% Epoxy Epoxy Silicone Low Low Non-Inductive ±0.25% ∆R Overload (1.5xW, 5S, nte 1.5xV) ±1% ∆R ±0.5% ∆R ±2% ∆R ±0.5% ∆R ±0.4% ∆R Moisture Resistance ±2% ∆R ±0.5% ∆R ±0.25% ∆R Voltage Coefficient (VC = ppm/V) - 1005 - F T 50 W RCD Type Options: P, H, B, 58, etc. (leave blank if std) 4-Digit Resis. Code 0.1%-1%: 1001=1K, 1002=10K, 1003=100K, 1004=1M, 1005=10M, 1006=100M, 1G00=1GΩ, 10G0=10G, 100G=100G, 1T00=1TΩ, 10T0=10T 3-Digit Resis. Code 2%-10%: 102=1K, 103=10K, 104=100K, 105=1M, 106=10M, 107=100M,1G0=1G, 10G=10G, 100G=100G,1T0=1TΩ, 10T=10T Tolerance: J=5%,G=2%,F=1%,D=.5%,C=.25%,B=.1%,A=.05% Packaging: B = Bulk, T = Tape & Reel TC: 15=15ppm, 25 =25ppm, 50 =50ppm, 80 = 80ppm, 101 =100ppm, 201=200ppm, 351=350ppm, 401=400ppm, 102=1000ppm, 152=1500ppm) Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable) RG Series -55 to +155°C* Load Life (1000 hours) <1GΩ -10ppm/ V -5ppm/ V -0.3ppm/ V 1GΩ - 10GΩ -30ppm/ V -20ppm/ V -1.5ppm/ V 10G - 7TΩ N/A -100ppm/ V -2ppm/ V * Extended temperature range available ** Tinned copper leads avail. on Series RP (specify Opt.25) DERATING % RATED POWER P/N DESIGNATION: Operating Temp. Range 100 75 RP 50 RG,RH 25 0 25 50 75 100 125 150 AMBIENT TEMPERATURE (°C) 175 200 225 RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected] FA036C 69 Sale of this product is in accordance with GF-061. Specifications subject to change without notice.