Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide Inductive Filtering Modular RJ Jacks L Series UL Recognized CSA Certified RJ11 RJ11 with Block Filter RJ45 with Sleeve Filter RJ45 L Series Specifications • Inductive filtering in standard RJ11, RJ45, or handset jacks. Contacts: Material: Phosphor Bronze Plating: 50 microinches gold Barrier underplating: 100 microinches nickel Resistance: Initial: 20 m max. After 500 mating cycles: 30 m max. • Available with standard ferrite sleeve inductors or higher performance ferrite blocks • Available unshielded or shielded with board grounded shield or spring fingered panel ground interface Available Part Numbers Ferrites: Type: Sleeves: Block: High resistivity, nickel zinc ceramic Single-aperture cylinders Multi-aperture rectangular prism Shield Material: Tin-plated copper alloy Housing Material: Glass-filled polyester (UL94V-0) Dielectric Withstanding Voltage: Line to Line and Line to Ground: Printed Circuit Board Retention: Before soldering: After soldering: 1000 VAC for 60 seconds 1 lb. minimum 20 lb. minimum Typical Impedance in Ohms 6 150 140 130 120 110 Impedance in Ohms 100 90 Signal Line Products Inductor Filter RJH-4L-B RJ45-6L-S RJ11-2L-S RJ45-6L-B RJ11-2L-B RJ45-8L-S RJ11-4L-S RJ45-8L-B RJ11-4L-B RJ11-6L-S RJ11-6L-B Inductor Filter and Shield RJ11-2L2-B RJ45-6L1-S RJ11-4L1-S RJ45-6L1-B RJ11-4L1-B RJ45-6L2-S RJ11-4L2-S RJ45-6L2-B RJ11-4L2-B RJ45-8L1-S RJ11-6L1-S RJ45-8L1-B RJ11-6L1-B RJ45-8L2-S RJ11-6L2-S RJ45-8L2-B RJ11-6L2-B 80 70 60 50 40 30 20 10 0 1 25 100 200 500 Frequency in MHz Ferrite block Ferrite sleeve Shield 2 Shield 1 Model dimensions and PC board layout on pages 255-259 247 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide Inductive Filtering Ganged Modular RJ Jacks L – Ganged Series 4RJ11 UL Recognized CSA Certified 6RJ11 2RJ11 with Block Filter L – Ganged Series Specifications • Ganged version of our L Series filtered jacks Contacts: Material: Phosphor Bronze Plating: 50 microinches gold Barrier underplating: 100 microinches nickel Resistance: Initial: 20 m max. After 500 mating cycles: 30 m max. • Available in RJ11 models with block inductors • Available in gangs of 2, 4 or 6 • Retrofits existing unfiltered ganged jack footprints Ferrites: Type: Block: Dimensions and PC Board Layout Housing Material: .050 1.27 A .470 11.94 Glass-filled polyester (UL94V-0) Dielectric Withstanding Voltage: Line to Line and Line to Ground: Printed Circuit Board Retention: Before soldering: After soldering: B C .325 8.25 High resistivity, nickel zinc ceramic Multi-aperture rectangular prism .100 2.54 .050 [1.27] 1000 VAC for 60 seconds 1 lb. minimum 20 lb. minimum + .008 .030 - .003 Dia. .250 .350 [8.89] [6.35] .128 + .003 Dia. D .810 20.57 .590 14.99.040 1.02 Available Part Numbers 2RJ11-6L-B 6RJ11-6L-B 4RJ11-6L-B Typical Impedance in Ohms 150 .195 140 Ports 130 .165 4.19 120 A B C D 4 6 2 110 100 Impedance in Ohms .410 10.41 90 80 70 60 50 40 30 20 10 0 1 25 100 200 500 Frequency in MHz 248 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide Model Dimensions L, LC, LCT and X Series RJ Jack Dimensions RJ11 – No Shield RJ11 – Style 2 Shield .900 22.86 .800 20.32 .810 20.57 .620 15.75 .520 13.21 .780 19.81 .590 14.99 .040 1.02 .04 1.02 .165 4.19 .195 4.95 .322 8.19 .165 4.19 .165 4.19 .195 4.95 .395 10.03 .485 12.32 .322 8.18 6 4 2 5 3 6 .520 13.21 4 2 1 5 .540 13.72 3 1 RJ11-2L-S RJ11-4L-S RJ11-6L-S Part No. RJ11-2L-B RJ11-4L-B RJ11-6L-B RJ11-2X RJ11-4X RJ11-6X RJ11-2LC2-S RJ11-4LC2-S RJ11-6LC2-S RJ11 – Style 1 Shield Part No. RJ11-2LC2-B RJ11-4L2-S RJ11-4LC2-B RJ11-6L2-S RJ11-6LC2-B RJ11-4L2-B RJ11 – PC Board Layout .900 22.86 .860 21.84 .840 21.34 With shield .350 8.89 .250 6.35 .322 8.18 0.76 ± .003 1.93 ± .08 .780 19.81 0.030 +.008 / -.003 .76 +.20 / - .08 (6 places) .165 4.19 .165 4.19 .322 8.18 6 1 2 3 4 5 6 2 5 3 .540 13.72 1 RJ11-6L1-B RJ11-6LCT1-S RJ11-6LCT1-B .075 1.91 .075 1.91 .210 5.33 .345 8.76 .050 1.27 (5 places) Signal Line Products 4 Part No. RJ11-2LC1-B RJ11-4L1-S RJ11-4LC1-B RJ11-6L1-S RJ11-6LC1-B RJ11-4L1-B .400 10.16 .485 12.32 6 RJ11-2LC1-S RJ11-4LC1-S RJ11-6LC1-S Edge of Board .04 1.02 .195 4.95 RJ11-6L2-B RJ11-6LCT2-S RJ11-6LCT2-B .128 ± .003 Dia. 3.25 ± .08 (2 holes) For all RJ11 L, LC, LCT and X Series Models Shown from Component Side 255 255 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide Model Dimensions (continued) L, LC, LCT and X Series RJ Jack Dimensions (continued) RJ45 – No Shield RJ45 – Style 2 Shield .700 17.78 .600 15.24 .900 22.86 .800 20.32 .810 20.57 .540 13.72 .780 19.81 .04 1.02 .04 1.02 .165 4.19 .195 4.95 .322 8.18 .195 4.95 .165 4.19 .165 4.19 .395 10.03 .322 8.18 .485 12.32 8 7 8 6 7 4 5 6 5 4 3 2 2 1 1 Part No. RJ45-6L-S RJ45-8L-S RJ45-6L-B .620 15.75 3 Part No. RJ45-6LC2-S RJ45-8LC2-S RJ45-6LC2-B RJ45-8LC2-B RJ45-6L2-S RJ45-8L2-S RJ45-6L2-B RJ45-8L2-B RJ45-8LCT2-S RJ45-8LCT2-B RJ45-8L-B RJ45-6X RJ45-8X RJ45 – Style 1 Shield RJ45 – PC Board Layout .900 22.86 .860 21.84 .920 23.37 .322 8.18 .780 19.81 .030 +.008/.003 Dia. .76 +.20/-.08 (8 PLACES) 1 .04 1.02 3 .195 4.95 .076±.003 Dia. 1.93±.08 (4 PLACES) .350 8.89 .250 6.35 .165 4.19 .165 4.19 .450 11.43 5 7 .322 8.18 2 4 6 .050 1.27 (7 SPACES) 8 .485 12.32 8 .210 5.33 7 6 5 4 .620 15.75 3 2 .345 8.76 .090 .050 2.29 1.27 .128±.003 Dia. 3.25±.08 (4 PLACES) 1 RJ45-6LC1-S RJ45-6L1-S RJ45-8LCT1-S Part No. RJ45-8LC1-S RJ45-8L1-S RJ45-8LCT1-B RJ45-6LC1-B RJ45-6L1-B RJ45-8LC1-B RJ45-8L1-B For all RJ45 L, LC, LCT and X Series Models Shown from Component Side Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide Model Dimensions (continued) L, LC, LCT and X Series RJ Jack Dimensions (continued) RJH – No Shield RJH – PC Board Layout .540 13.72 .440 11.18 .810 20.57 .322 8.18 .350 8.89 .250 6.35 .590 14.99 .030 +.008/-.003 Dia. .76 +20/-.08 (4 holes) .195 4.95 .300 7.62 .322 8.18 Edge of board .04 1.02 1 2 3 4 .395 10.03 .075 1.91 .050 1.27 (3 Spaces) 4 3 .128±.003 Dia. 3.25±.08 (2 holes) 2 1 .250 6.35 .350 8.89 Part No. RJH-4-L-B N and Z Series RJ Jack Dimensions RJ11 – Low Profile, No Shield .620 15.75 .520 13.21 RJ11 Low Profile, Style 3 Shield .710 18.03 .740 18.80 .910 Max. 23.11 .515* 13.08 .010 .25 .485 12.32 .010 .25 .120 3.05 .135 3.43 .165 4.19 .217 5.51 .135 3.43 .165 4.19 6 *to top of shield .217 5.51 .400 10.16 .430 10.92 Signal Line Products 6 6 4 2 4 5 3 .520 13.21 2 5 3 .550 13.97 1 1 Part No. Part No. RJ11-6N-B RJ11-6Z RJ11-6N3-B RJ11-6Z3 257 257 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide Model Dimensions (continued) N and Z Series RJ Jack Dimensions (continued) RJ11 Low Profile, Style 4 Shield .620 15.75 RJ45 – Low Profile, No Shield .515* 13.08 .120 3.05 .710 18.03 .70 17.78 .60 15.24 .740 18.80 .485 12.32 .010 .25 .010 .254 .135 .165 3.43 4.19 .135 3.5 .165 4.2 *to top of shield .217 5.51 .430 10.92 6 4 2 .217 5.51 5 3 .550 13.97 1 Part No. RJ11-6N4-B RJ11-6Z4 RJ11 Low Profile, PC Board Layout RJ45-8N-B Part No. RJ45-8N-S RJ45-8Z RJ45 – Low Profile, Style 3 Shield .740 18.80 .99 Max. 25.15 .076±.003 1.93±.08 Dia. (2 PLACES) .217 5.51 .515* 13.08 .350 8.89 .250 6.35 .030 + .008/- .003 Dia. .76 +.20/-.08 (6 PLACES) 1 2 .400 10.16 3 .120 3.05 .050 (5 SPACES) 1.27 .135 .165 3.43 .4.19 *to top of shield 4 5 .217 5.51 6 .080 2.03 .40 10.16 .430 10.92 .075 1.91 .120 3.05 8 7 .128±.003 Dia. 3.25±.08 (2 HOLES) 6 5 4 .630 16.00 3 2 1 For all RJ11 N and Z Series Models Shown from Component Side RJ45-8N3-B Part No. RJ45-8N3-S RJ45-8Z3 258 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide Model Dimensions (continued) N and Z Series RJ Jack Dimensions (continued) RJ45 Low Profile, Style 4 Shield RJ45 Low Profile PC Board Layout .740 18.80 .700 17.78 .350 8.89 .250 6.35 .217 5.51 .515* 13.08 .010 .25 .076±.003 Dia. 1.93±.08 (2 Places) .120 3.05 .135 3.43 .217 5.51 3 .450 11.43 *to top of shield 5 7 .430 10.92 5 3 2 .050 (7 Spaces) 1.27 4 6 8 .095 2.41 8 7 .030 +.008/-.003 Dia. .76 +.20/-.08 (8 Places) 1 .165 4.19 .120 3.05 6 4 .630 16.00 .050 1.27 .128±.003 Dia. 3.25±.08 (2 Places) 2 1 RJ45-8N4-B Part No. RJ45-8N4-S For all RJ45 N and Z Series Models Shown from Component Side RJ45-8Z4 6 Signal Line Products 259 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com