RLD65PZB5 Laser Diodes DVD-Record, High power red laser diode RLD65PZB5 The RLD65PZB5 is the red high-output semiconductor laser developed since it corresponded to the high speed needs of the optical pick up for DVD record. zExternal dimensions (Unit : mm) zApplications DVD±R DVD±RW DVD−RAM Equivalent circuit diagram 90°±2° 0.4±0.1 zFeatures 1) Absolute maximum optical power output : Pulse 240mW 2) High speed response : ~2ns (conventional ratio 50%) 3) For field pattern Aspect Ratio : 1.7 4) φ5.6mm small package (optical height 1.35mm) φ3.6 3 φ4.4+0 φ2.0±0.2 1.0±0.1 1 2 (3) 5.6 +0 −0.025 φ1.6 φ1min. L.D. Glass window (1) (2) Optical distance 1.35±0.08 0.5min. High power type Sub mount φ1.2max. 3−φ0.45 6.5±0.5 0.5max. (1.27) 1.2±0.1 2.3±0.5 Laser chip zAbsolute maximum ratings (Tc=25°C) Parameter Symbol Limits Unit Output PO Pulse 240 mW Laser reverse voltage VR 2 V Operating temperature Top −10 to +70 (Pulse) °C Storage temperature Tstg −40 to +85 °C Pulse conditions : pulse width < 80ns duty 50% 1/2 RLD65PZB5 Laser Diodes zElectrical and optical characteristics (Tc=25°C) Parameter Symbol Min. Typ. Max. Unit Threshold current Ith∗1 − 60 75 mA CW Operating current Iop∗1 − 150 200 mA CW : PO=80mW Operating voltage Vop∗1 − 2.7 3.2 V CW : PO=80mW Differential efficiency η∗1 0.7 1.0 1.3 Monitor current Im∗1 − − − Parallel divergence angle θ // ∗1 8 10 13 Perpendicular divergence angle θ ⊥∗1 15 17 19 Parallel deviation angle ∆φ //∗1 −2.0 0 +2.0 Perpendicular deviation angle ∆φ ⊥∗1 −3.0 0 +3.0 ∆XYZ∗1 −80 0 +80 λ∗1 650 658 662 nm CW : PO=80mW As∗2 − − 6 µm CW : PO=80mW Emission point accuracy Peak emission wave length Astigmatism Conditions CW : mW/mA 30mW / (I(80mW) −I(50mW)) − mA CW : PO=100mW deg µm − ∗ θ // and θ ⊥ are defined as the angle within which the intensity is 50% of the peak value. zElectrical and optical characteristics curve 200 150 θ⊥ 5 4 3 100 INTENSITY OPTICAL POWER : PO (mW) 1.0 6 Tc=25°C 40°C 50°C 60°C 70°C 80°C θ // 0.5 2 50 0 PULSED 100ns Duty50% 0 100 200 300 OPERATING CURRENT : IF (mA) Fig.1 Optical output vs. operating current 1 0 0 −60 −40 −20 0 20 40 60 ANGLE (deg) Fig.2 Far field pattern 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0