TOKEN RMCA, RMCB Ceramic Resistors Ceramic Composition Resistors Enhanced Performance for High Voltage Applications - Ignition Non-Inductive (RMCA, RMCB) Preview The RMCA, RMCB Series MELF type of fixed ceramic resistors from Token Electronics offers automotive designers a compact solution for applications involving high voltages, surges, high peak power, or high-energy pulses. They offer enhanced performance in R-C snubber circuits, high voltage power supplies, and inrush limiters. Token’s RMCA, RMCB series now offers the industry a direct replacement carbon composition resistor based on a bulk resistive element comprising carbon in a ceramic filler. Due to the need for higher peak voltages, the RMCA, RMCB range is perfect for vehicle ignition system applications. The RMCA, RMCB Series conform to RoHS compliant and lead free. For customed designs, tighter tolerances, non-standard technical requirements, or custom special applications, please contact our sales for more information. Ceramic Composition Resistor Construction : Bulk ceramic resistors that consists of a clay, alumina, and ceramic filler that has been blended and pressurized into a resistive core and then covered with a molded outer insulating core. Replacement Carbon-Composition Resistors : Design requirements for custom sizes, surface mount, or special footprints can be met easily. In cases where several carbon-composition resistors have been used together in an array to achieve a particular rating, they have been replaced with a single bulk ceramic resistor, frequently at a lower installed cost. Features Applications - Operating Temperature -40°C ~ 155°C. - Resistance Tolerance K(±10%), M(±20%). - Typical resistance range 470 ohm ~ 100 Kohm. - Replaces 1 and 2 watt carbon composition resistors. - Suitable for noise suppressor of engine ignition system. - High peak power, Reliable with non-disconnection failure. - Rated Wattage up 5W, meets high energy density demands. Version 2010 http://www.token.com.tw/ - Inrush limiters - R-C snubber circuits - Vehicle ignition system - High voltage power supplies rfq token.com.tw 01 of 03 TOKEN RMCA, RMCB Ceramic Resistors General Specifications (Unit: mm) RMC-A Style RMC-B Style Silver Layer L Model RMC RMC RMC RMC D Style Cap D L Dimensions (mm) Rated Wattage A L 7 ± 1.5 9 ± 1.5 10 ± 1.5 11 ± 1.5 18 ± 1.5 19 ± 1.5 24 ± 2.0 25 ± 2.0 24 ± 2.0 25 ± 2.0 1 B A B A B A B 2 3 5 D 4.0 ± 0.4 4.0 ± 0.4 4.0 ± 0.4 4.6 ± 0.5 4.0 ± 0.4 4.6 ± 0.5 4.0 ± 0.4 4.6 ± 0.5 7.0 ± 0.5 7.6 ± 0.5 Electrical Characterisics Item Power Rating at 25°C (W) Operating Temp. Range (°C) RMCA, RMCB 1 Resistance Tolerance Resistance Range (Ω) Max. Working Voltage (V) -40°C ~ 25°C T.C.R (PPM/°C) 25°C~155°C Max. Pulse Voltage (KV) Moisture Resistance (%) 470 ~ 33K 300 -750 ~ 3300 -750 ~ 2600 8 10 2 3 -40 ~ 155 K(±10%), M(±20%) 1K ~ 56K 1K ~ 100K 350 400 -750 ~ 3300 -750 ~ 3300 -750 ~ 2600 -750 ~ 2600 15 20 10 10 5 470 ~ 33K 500 -750 ~ 3300 -750 ~ 2600 25 10 Note: Non-Inductive Performance: 1. Chemically inert and thermally stable, the resistors are inherently non-inductive because of their bulk ceramic construction, which allows energy and power to be uniformly distributed through the entire ceramic resistor body with no film or wire to fail. 2. The bulk ceramic material also allows simple efficient resistor designs that enable the designer to minimize the resistor package size while providing the required performance and reliability. 02 of 03 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN RMCA, RMCB Ceramic Resistors How to Order RMC 2W a 510R M Part Number: RMC Rated Power (W): 1W, 2W, 3W, 5W Style: a Style, b Style Resistance Value (Ω) Code 510R 5K1 51K 68K Resistance Value (Ω) 510Ω 5.1KΩ 51KΩ 68KΩ Resistance Tolerance Code K M Resistance Tolerance ±10% ±20% Back to 1st Page - Ceramic Resistors (RMCA, RMCB) Version 2010 http://www.token.com.tw/ rfq token.com.tw 03 of 03