RMPG06A THRU RMPG06J 50V-600V 1.0A GLASS PASSIVATED JUNCTION FAST SWITCHING PLASTIC RECTIFIER FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Low forward voltage drops, high current capability ♦ Glass passivated chip junction ♦ High surge capability ♦ Typical IR less than 0.1µA ♦ High temperature soldering guaranteed: 250°C/10 seconds 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension MECHANICAL DATA Case: Molded plastic over passivated chip Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.0064 ounce, 0.181 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS RMPG 06A RMPG 06B RMPG 06D RMPG 06G RMPG 06J UNITS Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 Volts Maximum RMS voltage VRMS 35 70 140 280 420 Volts Maximum DC blocking voltage VDC 50 70 200 400 600 Volts Maximum average forward rectified current, 0.375" (9.5mm) lead length at TA=25°C I(AV) 1.0 Amp Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 40.0 Amps VF 1.3 Volts IR 5.0 50.0 µA CJ 6.6 pF trr 150 RΘJA RΘJL 67.0 30.0 °C/W TJ, TSTG -55 to +150 °C Maximum instantaneous forward voltage at 1.0A TA=25°C TA=125°C Maximum DC reverse current at rated DC blocking voltage Typical junction capacitance (NOTE 1) Typical reverse recovery time (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range 200 ns NOTES: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted with 0.22 x 0.22” (5.5 x 5.5mm) copper pads E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com RMPG06A THRU RMPG06J 50V-600V 1.0A GLASS PASSIVATED JUNCTION FAST SWITCHING PLASTIC RECTIFIER RATINGS AND CHARACTERISTIC CURVES RMPG06A THRU RMPG06J FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 50 RESISTIVE OR INDUCTIVE LOAD 0.375" (9.5mm) LEAD LENGTH 1.0 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1 - FORWARD CURRENT DERATING CURVES 1.2 0.8 0.6 0.4 CAPACITANCE LOADS 5.0 Ipk/IAV= 10 20 0.2 0 0 25 50 75 100 125 150 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 40 NO LOAD CONDITION 30 20 RATED LOAD 10 0 175 AMBIENT TEMPERATURE, °C 1 10 100 NUMBER OF CYCLES AT 60 HZ FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 30 TJ=125°C INSTANTANEOUS FORWARD CURRENT, AMPERES 10 PULSE WIDTH=300µs 1% DUTY CYCLE 1 TJ=25°C 0.1 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 TJ=125°C 1 TJ=75°C 0.1 TJ=25°C 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 0.01 0.4 0.6 0.8 1 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF 30 TJ=25°C f=1.0 MHZ Vsig=50mVp-p 10 1 TRANSIENT THERMAL IMPEDANCE, °C/W FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE 100 10 1 0.1 0.01 0.1 1 10 100 t, PULSE DURATION, sec. 1 10 100 REVERSE VOLTAGE, VOLTS E-mail: [email protected] 2 of 2 Web Site: www.taychipst.com