CMF (Military RN and RL) Vishay Dale Metal Film Resistors, Military, MIL-R-10509 Qualified, Type RN and MIL-PRF-22684 Qualified, Type RL FEATURES • Very low noise (- 40 dB) • Very low voltage coefficient (5 ppm/V) • Controlled temperature coefficient • Flame retardant epoxy coating • Commercial alternatives to military styles are available with higher power ratings. See appropriate catalog or web page STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE® MILITARY APPROVED VALUE RANGE (Ω) MIL STYLE VISHAY DALE MODEL MAXIMUM WORKING VOLTAGE MIL-PRF-22684 DIELECTRIC STRENGTH VAC MIL-R-10509 CHARACTERISTIC D CHARACTERISTIC C CHARACTERISTIC E RN50 CMF50 200 - 10R - 100K 10R - 100K - 450 RN55 CMF55 200 10R - 301K 49R9 - 100K 49R9 - 100K - 450 RN60 CMF60 300 10R - 1M 49R9 - 499K 49R9 - 499K - 500 RN65 CMF65 350 10R - 2M 49R9 - 1M 49R9 - 1M - 900 RN70 CMF70 500 10R - 2.49M 24R9 - 1M 24R9 - 1M - 900 RL07 CMF07 250 - - - 51R - 150K 450 RL20 CMF20 350 - - - 4R3 - 470K 700 Vishay Dale commercial value range: Extended resistance ranges are available in commercial equivalent types. Please contact us by using the email at the bottom of this page. TECHNICAL SPECIFICATIONS PARAMETER UNIT CONDITION Voltage Coefficient ppm/V 5 when measured between 10 % and full rated voltage Insulation Resistance Ω ≥ 1010 minimum dry; ≥ 108 minimum after moisture test Operating Temperature Range °C - 65/+ 175 (see derating curves for military range) Terminal Strength Ib 5 pound pull test for RL07/RL20; 2 pound pull test for all others Solderability www.vishay.com 44 Continuous satisfactory coverage when tested in accordance with MIL-R-10509 and MIL-PRF-22684 For technical questions, contact: [email protected] Document Number: 31027 Revision: 28-Aug-06 CMF (Military RN and RL) Metal Film Resistors, Military, MIL-R-10509 Qualified, Type RN and MIL-PRF-22684 Qualified, Type RL Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RN60D3483FR36 (preferred part numbering format) R MIL STYLE N 6 0 D 3 4 8 3 F R RESISTANCE TOLERANCE VALUE CODE RN50 E = 25 ppm 3 digit significant B = ± 0.1 % C = ± 0.25 % RN55 C = 50 ppm figure, followed by D = 100 ppm D = ± 0.5 % a multiplier RN60 RN65 F=±1% 10R0 = 10 Ω RN70 2152 = 21.5 k Ω 2494 = 2.49 M Ω Historical Part Number example: RN60D3483F (will continue to be accepted) 3 6 CHARACTERISTIC SPECIAL PACKAGING B14 = Tin/Lead, Bulk Blank = Standard R36 = Tin/Lead, T/R (Full) (Dash Number) RE6 = Tin/Lead, T/R (1000 pcs) (up to 1 digit) F RN60 D 3483 MIL STYLE CHARACTERISTIC RESISTANCE VALUE R36 TOLERANCE CODE PACKAGING New Global Part Numbering: RL07S471JR36 (preferred part numbering format) R L 0 MIL STYLE LEAD MATERIAL RL07 RL20 S = Solderable 7 S 4 7 1 RESISTANCE VALUE 2 digit significant figure, followed by a multiplier 4R3 = 4.3 Ω 202 = 2.0 k Ω 474 = 470 k Ω J R 3 TOLERANCE CODE G=±2% J=±5% 6 PACKAGING B14 = Tin/Lead, Bulk R36 = Tin/Lead, T/R (Full) RE6 = Tin/Lead, T/R (1000 pcs) Historical Part Number example: RL07S471J (will continue to be accepted) RL07 S MIL STYLE LEAD MATERIAL J 471 RESISTANCE VALUE MATERIAL SPECIFICATIONS Element: Nickel-chrome alloy Coating: Flame retardant epoxy, formulated for superior moisture protection Core: Fire-cleaned high purity ceramic Termination: Standard lead material is solder-coated copper. Solderable and weldable. R36 TOLERANCE CODE PACKAGING ENVIRONMENTAL SPECIFICATIONS General: Environmental performance is shown in the Environmental Performance table. Test methods are those specified in MIL-R-10509 and MIL-PRF-22684. Shelf Life: Resistance shifts due to storage at room temperature are negligible. Vishay Dale CMF resistors have an operating temperature range of - 65 °C to + 175 °C. They must be derated according to the APPLICABLE MIL-SPECS MIL-R-10509 and MIL-PRF-22684: The CMF models meet or exceed the electrical, environmental and dimensional requirements of MIL-R-10509 and MIL-PRF-22684. Noise: Vishay Dale metal film resistors have exceptionally low noise level. Average for standard resistance range is 0.10 micro-volt per volt over a decade of frequency, with low and intermediate resistance values typically below 0.05 micro-volt per volt. % OF RATED POWER following curves: 120 100 MIL-R-10509 Char. D Rating 80 MIL-R-10509 Char. C & E Rating 60 40 20 MIL-PRF-22684 0 CAGE CODE: 91637 50 70 DERATING Document Number: 31027 Revision: 28-Aug-06 For technical questions, contact: [email protected] 90 110 130 150 170 AMBIENT TEMPERATURE ° C www.vishay.com 45 CMF (Military RN and RL) Metal Film Resistors, Military, MIL-R-10509 Qualified, Type RN and MIL-PRF-22684 Qualified, Type RL Vishay Dale DIMENSIONS in inches [millimeters] 1.50 ± 0.125 [38.10 ± 3.18] A C Max. VISHAY DALE MODEL B D A B C (Max.) D CMF50 0.150 ± 0.020 [3.81 ± 0.51] 0.065 ± 0.015 [1.65 ± 0.38] 0.244 [6.20] 0.016 ± 0.002 [0.41 ± 0.05] CMF55 0.240 ± 0.020 [6.10 ± 0.51] 0.090 ± 0.008 [2.29 ± 0.20] 0.278 [7.06]* 0.025 ± 0.002 [0.64 ± 0.05] CMF60 0.344 ± 0.031 [8.74 ± 0.79] 0.145 ± 0.015 [3.68 ± 0.38] 0.425 [10.80] 0.025 ± 0.002 [0.64 ± 0.05] CMF65 0.562 ± 0.031 [14.27 ± 0.79] 0.180 ± 0.015 [4.57 ± 0.38] 0.687 [17.45] 0.025 ± 0.002 [0.64 ± 0.05] CMF70 0.562 ± 0.031 [14.27 ± 0.79] 0.180 ± 0.015 [4.57 ± 0.38] 0.687 [17.45] 0.032 ± 0.002 [0.81 ± 0.05] CMF07 0.240 ± 0.020 [6.10 ± 0.51] 0.090 ± 0.008 [2.29 ± 0.20] 0.278 [7.06] 0.025 ± 0.002 [0.64 ± 0.05] CMF20 0.375± 0.040 [9.53 ± 1.02] 0.145 ± 0.015 [3.68 ± 0.38] 0.425 [10.80] 0.032 ± 0.002 [0.81 ± 0.05] * 0.290" [7.37] for ± 0.25 % and ± 0.1 % resistance tolerances. MILITARY POWER RATING MILITARY QUALIFIED MIL-R-10509 WATTAGE MIL-PRF-22684 AT + 70 °C AT + 125 °C (D) (C & E) 0.05 RN50 0.10 RN55 0.125 RN55 RN60 0.25 RN60 RN65 0.50 RN65 RN70 1.0 RN70 NOTE: Commercial equivalents of military styles are available with higher power ratings. Consult factory. RL07 RL20 - HEAT RISE 100 The increase in resistors surface temperature due to rated load is shown in the chart above. Resistor temperature = heat rise + ambient temperature. 80 HEAT RISE (°C) AT + 70 °C 60 3/4 W 40 1/2 W 1/2 W 1/4 W 20 1/8 W 1/4 W 1/4 W 1/10W 1/8 W CMF55 CMF07 CMF60 CMF20 0 www.vishay.com 46 CMF65 CMF70 For technical questions, contact: [email protected] Document Number: 31027 Revision: 28-Aug-06 CMF (Military RN and RL) Metal Film Resistors, Military, MIL-R-10509 Qualified, Type RN and MIL-PRF-22684 Qualified, Type RL Vishay Dale MARKING Characteristics: D = 100 ppm, C = 50 ppm, E = 25 ppm Tolerance: F = 1 %, D = 0.5 %, C = 0.25 %, B = 0.1 % Value = three significant figures and multiplier J = JAN (joint Army - Navy) brand RN50: (3 lines) J50D 1211 F137 RN55, RN60, RN65, RN70 (4 lines) DALE 0137J RN55D 1211F J50D JAN, type, characteristic 1211 Value F137 Tolerance & 3 digit date code Company Logo 4 digit date code and JAN brand Type and characteristic Value and Tolerance (RL series are color banded per MIL-PRF-22684) PERFORMANCE REQUIREMENT MIL. Temperature Coefficient Applicable Vishay Dale Temperature Coefficient TEST MIL-R-10509 MIL-PRF-22684 CHARACTERISTIC D CHARACTERISTIC C CHARACTERISTIC E + 200 - 500 ppm/°C ± 50 ppm/°C ± 25 ppm/°C ± 200 ppm/°C ± 100 ppm/°C ± 50 ppm/°C ± 25 ppm/°C ± 200 ppm/°C MIL. (Max.) MIL. (Max.) MIL. (Max.) MIL. (Max.) Thermal Shock ± 0.50 % ΔR ± 0.25 % ΔR ± 0.25 % ΔR ± 1.00 % ΔR Short Time Overload ± 0.50 % ΔR ± 0.25 % ΔR ± 0.25 % ΔR ± 0.50 % ΔR Low Temperature Operation ± 0.50 % ΔR ± 0.25 % ΔR ± 0.25 % ΔR ± 0.50 % ΔR Moisture Resistance ± 1.50 % ΔR ± 0.50 % ΔR ± 0.50 % ΔR ± 1.50 % ΔR Shock ± 0.50 % ΔR ± 0.25 % ΔR ± 0.25 % ΔR ± 0.50 % ΔR Vibration ± 0.50 % ΔR ± 0.25 % ΔR ± 0.25 % ΔR ± 0.50 % ΔR Load Life ± 1.00 % ΔR ± 0.50 % ΔR ± 0.50 % ΔR ± 2.00 % ΔR Dielectric Withstanding Voltage ± 0.50 % ΔR ± 0.25 % ΔR ± 0.25 % ΔR ± 0.50 % ΔR Effect of Solder ± 0.50 % ΔR ± 0.10 % ΔR ± 0.10 % ΔR ± 0.50 % ΔR Document Number: 31027 Revision: 28-Aug-06 For technical questions, contact: [email protected] www.vishay.com 47 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1