Features Regulated Converters ● ● ● ● ● ● ● ● 60 Watts Regulated Output Power 2:1 Wide Input Voltage Range 1.6kVDC Isolation (Basic Insulation) Overload and Over Temperature Protection Six-Sided Shield No Derating to 40°C Standard 2” x2” Package and Pinning Efficiency to 90% Selection Guide 24V and 48V Wide Input Types Part Number Input Range VDC Output Voltage VDC Output Current mA Input (5,4) Current mA Efficiency(5) Capacitive(6) Load max. % µF RP60-243.3SG 18-36 3.3 14000 100/2264 89 36000 RP60-2405SG 18-36 5 12000 130/2941 90 20400 RP60-2412SG 18-36 12 5000 150/2907 90 3550 RP60-2415SG 18-36 15 4000 150/2907 90 2300 RP60-483.3SG 36-75 3.3 14000 80/1132 89 36000 RP60-4805SG 36-75 5 12000 90/1453 90 20400 RP60-4812SG 36-75 12 5000 100/1453 90 3550 RP60-4815SG 36-75 15 4000 100/1453 90 2300 POWERLINE DC/DC-Converter RP60SG Series 60 Watt 2” x 2” Single Output * no suffix for CTRL function with Positive Logic (1=ON, 0=OFF), this is standard * add /N for CTRL function with Negative Logic (0=ON, 1=OFF) Derating Graph (Ambient Temperature) 125 1=75Vin, 2=36Vin 100 1 2 RP60-4805SG Output Power (%) 75 50 Natural Convection 25 0 -40 -25 -10 0 30 60 70 80 90 100 110 40 Ambient Temperature Range (°C) Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical customer service at [email protected] www.recom-international.com January-2007 1 POWERLINE RP60-SG Series DC/DC-Converter Derating Graph (Ambient Temperature) RP60-4805SG 125 1=Natural Convection, 2=200LFM, 3=300LFM, 4=400LFM, 5=500LFM 1 100 Output Power (%) 75 50 2 3 45 Natural Convection 25 0 -40 -25 -10 0 50 60 70 80 90 100 110 40 Ambient Temperature Range (°C) Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range Undervoltage Protection 24V nominal input 18-36VDC 48V nominal input 36-75VDC 24V Input 48V Input DC-DC ON = 17VDC, DC-DC OFF = 15VDC DC-DC ON = 34VDC, DC-DC OFF = 32VDC Input Filter Pi Type Input Voltage Variation dv/dt (Complies with ETS300 132 part 4.4) Input Surge Voltage (100 ms max.) 24V Input 50VDC 48V Input 100VDC Input Reflected Ripple (nominal Vin and full load)(see Note 3) 20mAp-p Start Up Time (nominal Vin and constant resistor load) Remote ON/OFF (see Note 7) 20ms max. Positive logic - Standard Negative logic - /N Option Remote Pin Drive Current Remote OFF input current 5V/ms max DC-DC ON DC-DC OFF DC-DC ON DC-DC OFF Nominal Vin Nominal Vin Output Power Open or 3V < Vr < 12V Short or 0V < Vr < 1.2V Short or 0V < Vr < 1.2V Open or 3V < Vr < 12V -0.5 -1.0mA 4mA 60W max. Output Voltage Accuracy (full Load and nominal Vin) ±1% continued on next page 2 January-2007 www.recom-international.com RP60-SG Series POWERLINE DC/DC-Converter Specifications, cont. (typical at nominal input and 25°C unless otherwise noted) Voltage Adjustability (see Note 1) Line Regulation Load Regulation (see Note 3) Temperature Coefficient Ripple and Noise (20MHz bandwith) ±10% LL to HL at Full Load 0% to 100% Load 3.3,5V 12,15V Transient Response (25% load step change) Over Voltage Protection Zener diode clamp (only single) ±0.2% ±0.5% ±0.02%/°C max. 75mVp-p 100mVp-p 250µs 3.3 Vout 5 Vout 12 Vout 3.7-5.4V 5.6-7.0V 13.7-17.5V 15 Vout 16.8-20.5V 150% max. Over Load Protection (% of full load at nominal Vin) Short Circuit Protection Hiccup, automatic recovery Efficiency see „Selection Guide“ table Isolation Voltage 1600VDC min. Isolation Resistance 1 GΩ min. Isolation Capacitance 1500pF max. Operating Frequency 300kHz typ. Designed to meet Safety Standards IEC60950-1, UL60950-1, EN60950-1 Operating Temperature Range -40°C to +40°C(without derating) +55°C to +110°C(with derating) Maximum Case Temperature Storage Temperature Range Over Temperature Protection Thermal Impedance (see Note 11) 110°C Without Heat-Sink With Heat-Sink Thermal Shock -55°C to +125°C 120°C typ. 10.5°C/Watt 8.4°C/Watt MIL-STD-810D Vibration 10-55Hz, 10G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH Case Material Nickel plated copper Base Material Non-conductive black plastic FR4 Potting Material Conducted Emissions (see Notes 9, 10) Radiated Emissions ESD Radiated Immunity Fast Transient Surge Conducted Immunity Epoxy (UL94-V0) EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Weight 60g Dimensions MTBF (see Note 2) www.recom-international.com Class A Class A Perf. Criteria B Perf. Criteria A Perf. Criteria B Perf. Criteria B Perf. Criteria A 50.8 x 50.8 x 10.2mm Bellcore TR-NWT-00332 1093 x 103 hours MIL-STD-217F 1096 x 103 hours January-2007 3 RP60-SG Series POWERLINE DC/DC-Converter Notes : 1. Maximum output deviation is 10% inclusive of remote sense and trim. If remote sense is not being used, the +sense should be connected to its corresponding +OUTPUT and likewise the -sense should be connected to its corresponding –OUTPUT. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). 3. No minimum loading on the output is required to maintain specified regulation. Operation under no-load condition will not damage these devices 4. Maximum value at nominal input voltage and full load. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistive load. 7. The ON/OFF control pin voltage is referenced to the negative input (-Vin). To order negative logic ON/OFF control add the suffix-N (Ex: RP60-4805SG-N). 8. Heat sink is optional and P/N: 7G-0026A. 9. The RP60-SG series meets EN55022 Class A with an external capacitor across the input pins (24Vin:6.8µF/50V MLCC, 48Vin:2x2,2µF/100V MLCC) 1o. See also application notes for EMI-filtering. 11.Vertical orientation and natural convection. Package Style and Pinning (mm) 3rd angle projection 50.8 50.8 10.20 0.70 dia. 1.0 5.6 Pin Connections 45.70 4 5.10 1 2 15.30 27.9 3 Bottom View 5 6 2.5 5.10 Pin # 1 2 3 4 5 6 7 8 Single +Vin -Vin CTRL -SENSE (Note 1) +SENSE(Note 1) +Vout -Vout TRIM Pin Pitch Tolerance ±0.35 mm 7.6 15.20 20.30 7 8 4 January 2007 www.recom-international.com